Dotaz: WPA ubuntu 6.10

[gelehed]

Dobry den, potrebuju se pripojit s nb HP nx 7400 do site s wpa. Postupuju dle navodu, ktery pri konfiguraci uvadi a dostal jsem se do tohoto bodu:

$sudo wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf'
driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
eapol_version=1
ap_scan=0
fast_reauth=1
Line: 4 - start of a new network block
.
.vypis certifikatu
.
private_key_passwd - hexdump_ascii(len=8): [REMOVED]
eapol_flags=3 (0x3)
Priority group 0
   id=0 ssid='xxxxx'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:14:a5:d8:75:29
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface wlan0
Wireless event: cmd=0x8b06 len=8

kdyz dam CTRL+C tak jeste pribyde tento vypis

Ignore event for foreign ifindex 2
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: DISCONNECTED -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
WEXT: Operstate: linkmode=0, operstate=6
Cancelling scan request

Vypis wpa_supplicant.conf

eapol_version=1
ap_scan=0
fast_reauth=1
network={
   ssid="xxxxxxx"
   key_mgmt=IEEE8021X
   eap=TLS
   identity="xxx.xxx@xxx.cz"
   ca_cert="/etc/wpa_supplicant/ca.pem"
   client_cert="/etc/wpa_supplicant/user.pem"
   private_key="/etc/wpa_supplicant/user.pem"
   private_key_passwd="heslo_meho_certifikatu"
   eapol_flags=3
}

Wifi karta v nb je broadcom 4311 fungujici pres ndiswrapper.

Diky za kazdou radu

Na otázku zatím nikdo bohužel neodpověděl.