Dotaz: gentoo a nvidia-drivers

[chemicus]

Ahoj! Mam notebook asus f3m a na nem gentoo (jadro 2.6.18-gentoo-r6), nainstaloval jsem ovladace nvidia-drivers a zmenil xorg.conf presne podle instrukci uvedenych na strankach gentoo.org (modul dri zakomentovan, pridan modul glx, zmena ovladace z nv na nvidia). Pokud chci ale nastartovat Xka, tak se mi objevi jenom cerna obrazovka (monitor spadne do rezimu spanku) a musim to shodit ctrl-alt-backspace... Nevite nekdo, kde je chyba? V /tmp/log/Xorg.0.log neni zadne chybove hlaseni. Tady je pouzity xorg.cong:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
Load "glx"
Load "xtrap"
# Load "dri"
Load "dbe"
Load "record"
Load "extmod"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
EndSection

Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "C51 PCI Express Bridge"
BusID "PCI:0:5:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection



Odpovědi

[Fida]

Ahoj, ja jsem X-ka emergoval asi pred tydnem, mas je zkompilovane s Nvidia kartou (v /etc/make.conf VIDEO_CARDS="nvidia")? Jeste bych vyzkousel pridat dalsi subsekce display do xorg.conf tj. napr

Subsection "Display"
                Depth       16
                Modes       "1280x1024" "1024x768" "800x600" "640x480"
                ViewPort    0 0
         EndSubsection

        Subsection "Display"
                Depth       24
                Modes       "1280x1024" "1024x768" "800x600" "640x480"
                ViewPort    0 0
        EndSubsection

rekl bych, ze bude chyba v nastaveni. Pokud pridani radku nepomuze, tak bych si xorg.conf zalohoval a spustil X -configure a pote spustil X-ka s vygenerovanym konfiguracnim souborem Snad se postesti Fida

[chemicus]

Zkompilovany s nvidia to mam. Zkusil jsem pridat ty subsekce, ale bohuzel to nijak nepomohlo, stale cerna... S X -configure jsem zacinal, ten mi tam da ovladac nv, kde bohuzel nejde glx

[petr_p]

Nechci te znepokojovat, ale jses si jisty, ze tvoji grafickou kartu ten binarni nvidia ovladac podporuje?

A nakonec jadro mas v poradku (DRM, PCI-Express, apod.)?

[chemicus]

No tou podporou si jisty nejsem. V jadre se taky moc nevyznam, nastavil jsem ho podle navodu na strankach gentoo (aktivni enable loadable module support, MTTR support, AGP support, VESA VGA Graphics support (vesafb) a vypnuty nVidia Framebuffer support a nVidia Riva support) PCI-Express je zapnuty, DRM jako modul.

[chemicus]

Problem vyresen, pouzival jsem stary ovladac. Kdyz jsou odmaskoval x11-drivers/nvidia-drivers ~amd64, preinstaloval to a natahnul znova modul nvidia, tak uz to bezi bez problemu.