Dotaz: Kompilace kernelu 2.6.19 a vyssi : Ovladac pro SATA PDC20378

[radek]

Dobry den, pokousim se prekompilovat jadro 2.6.20. Nicmene jsem narazil na problem vyberu vhodneho ovladace pro nasledujici polozky (vypis z lspci):

RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02)
RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)

dekuju

Odpovědi

[Max]

Zkus toto:

Device Drivers  --->
 SCSI device support  --->
   <*> SCSI device support
   [*]   legacy /proc/scsi/ support
   <*>   SCSI disk support
   SCSI low-level drivers  --->
     <*> Serial ATA (SATA) support
     <*> Promise SATA TX2/TX4 support
     <*> VIA SATA support
 ATA/ATAPI/MFM/RLL support  --->
  <*> ATA/ATAPI/MFM/RLL support
  <*>   Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
  <*>     Include IDE/ATAPI CDROM support
  [*]     PCI IDE chipset support
  [*]       Sharing PCI IDE interrupts support
  [*]       Generic PCI bus-master DMA support
  [*]         Use PCI DMA by default when available
  <*>         VIA82CXXX chipset support 

Zdar Max

[radek]

Zaskrtal jsem tedy vse... Coz funguje, ja ale puvodne myslel, ktery z tech ovladacu je ten pravy... protoze nevim, jak poznat, ze to treba tenhle je ci neni : <*> Promise SATA TX2/TX4 support

kazdopadne diky. radek