Dotaz: Ctecka GemPC USB-SL a pametove karty(ne procesorove-smart)?

[Pavel]

zdravim, snazim se to rozbehnout(karta sle4442,je to 2wire synchronni),ale stale to nejde,pcsc a gscriptor z toho nic nevycte,ani atr(no,rekneme zacatek pameti,pri poslani prikazu pro vyber souboru 3f 00 to vypise chybu odesilani),zkousel jsem ovladac jak z (ccid) (ten zatim pametove karty nepodporuje),tak oficialni gemplus (ty to zase projistotu nepisou,navic s novym pcscd pada),take jsem zkousel libchipcard s temito ccid ovladaci,nechytne se ani tady (prikaz memcard)... u pcsc to pise error powering up card,memcard ceka na vlozeni karty, rekl bych,ze se to toci jenom kolem spravneho nastaveni ctecky do synchronniho rezimu (s=10),na windows to chodi bez problemu, stacilo by z ni vycist cokoliv jako identifikaci,o bezpecnost vubec nejde,je tu nejaka jina rozumna moznost nez jina ctecka nebo karta? dik,paja

Odpovědi

[ZAH]

Dle tohoto by mohla být šance to uhodit přes OpenCard

To use a pure Java CardTerminal the following steps have to be done:

1. Install Java Communications API available from Sun's Java Homepage.
    a) Add the provided comm.jar to your Classpath.
    b) Copy javax.comm.properties into your {java.home}/lib directory.
   
2. Add the Card Terminal classes provided by the reader vendor to your
   Classpath. The neccessary classes for working with GemCore and Oros
   card terminals from GemPlus are provided with this package.

3. If the PC/SC Base kit is installed, make sure the Smart Card Resource
   Manager is not running. To check this look in Settings/Services for a
   service called "Smart Card Resource Manager" and set it to Startup - 
   Manual. Also check Settings/Devices there are no running device drivers
   that block the serial ports (e.g. GrSerial for GemPlus GCR410 card
   readers).
   Then restart your computer.

4. If you are using a Pure Java CardTerminal other than a GemPlus Pure Java
   CardTerminal configure the respective CardTerminalFactory in the
   opencard.properties file. For GemPlus CardTerminals the Installer will do
   this for you.

Java Communications API by v linuxu mělo být pro architekturu x86 http://java.sun.com/products/javacomm/index.jsp