Dotaz: smart long test vysledek

[Jirasek]

Hoj. Pustil jsem long test smart

smartctl -t long /dev/sda

ale nemuzu úprijit na to, jak si pak zobrazit vysledek.

Poradte pls.

Odpovědi

[pee]

smartctl -a /dev/sda

[R]

"smartctl -a /dev/sda" - bude to dole v self-test logu.

[Jirasek]

Diky panove. Tohle mi test ukazal, je to OK?

 

smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Second Generation Serial ATA family
Device Model:     WDC WD2000JS-00MHB0
Serial Number:    WD-WMANL1059853
Firmware Version: 02.01C03
User Capacity:    200 049 647 616 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Mar  1 14:53:08 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)    Offline data collection activity
                    was suspended by an interrupting command from host.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:          (5760) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  69) minutes.
Conveyance self-test routine
recommended polling time:      (   6) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   199   189   021    Pre-fail  Always       -       5016
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1855
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       11553
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1827
190 Airflow_Temperature_Cel 0x0022   057   046   045    Old_age   Always       -       43
194 Temperature_Celsius     0x0022   107   096   000    Old_age   Always       -       43
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       182
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     11550         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

Mam totiz poblem. Kdyz presouvam vetsi obemy dat, tak se disk sekne. V logu jsem nasel:


ata3: SError: { Dispar BadCRC }


ata3.00: status: { DRDY ERR }


ata3.00: error: { ICRC ABRT }

...

[Jirasek]

Nikdo to neumi desifrovat?

[pantera]

ata.wiki.kernel.org/index.php/Libata_error_messages 

Dá se tam najít popis chyby, co znamená a nad tabulkou i pravděpodobná příčina - v tomto případě klasika - zkusit vyměnit kabely, případně píšou taky o možnosti nedostatečného napájení....

[Jirasek]

Jiny kabel nemam po ruce, tak jsem vypojil a zapojil puvodni (napajeni i sata) a uz to snad jede ... takze pak radsi vymenim.

[R]

SATA kable su hrozne smejdy, oplati sa mat vzdy nejake v zalohe.