Dotaz: Leadtek winfast DTV2000 H plus debian linux

[jirkamailto]

Dobry den,

chtel bych se zeptat, zdali se nekomu podarilo rozchodit TV kartu Leadtek winfast DTV2000 H plus na debianu. Hledal jsem na internetu a udelal jsem nasledujici:

zkompiloval a nainstaloval jsem z linuxtv.org moduly do jadra dle jejich navodu. Dale jsem je i do jadra nahral a to i s parametrem card=51. Prvni TV kartu (puvodni DTV1000) system detekuje a rozpozna v poradku, druhou ale ne, neprida ji jako /dev/dvb/adapter1.

Distribuce je debian lenny s distribucnim jadrem.

V serveru jsou nyni 2 TV karty:

Leadtek DTV 1000 --- funguje bez problemu

Leadtek winfast DTV2000 H plus --- nefunguje

 

Predem dekuji za jakekoliv napady.

 

/var/log/messages :

Linux video capture interface: v2.00
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
cx88[0]: subsystem: 107d:6f42, board: WinFast DTV2000 H [card=51,insmod option], frontend(s): 1
cx88[0]: TV tuner type 63, Radio tuner type -1
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
cx2388x alsa driver version 0.0.7 loaded
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
input: cx88 IR (WinFast DTV2000 H) as /class/input/input4
cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 16, latency: 32, mmio: 0xfc000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
cx88[1]: subsystem: 107d:665f, board: WinFast DTV1000-T [card=35,insmod option], frontend(s): 1
cx88[1]: TV tuner type 4, Radio tuner type -1
input: cx88 IR (WinFast DTV1000-T) as /class/input/input5
cx88[1]/0: found at 0000:01:07.0, rev: 5, irq: 17, latency: 32, mmio: 0xf9000000
cx88[1]/0: registered device video1 [v4l2]
cx88[1]/0: registered device vbi1
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:06.2[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 16, latency: 32, mmio: 0xfa000000
cx88[1]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
cx88[1]/2: found at 0000:01:07.2, rev: 5, irq: 17, latency: 32, mmio: 0xf8000000
ACPI: PCI Interrupt 0000:01:06.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88/2: cx2388x dvb driver version 0.0.7 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 107d:6f42, board: WinFast DTV2000 H [card=51]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
cx88[1]/2: subsystem: 107d:665f, board: WinFast DTV1000-T [card=35]
cx88[1]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
DVB: registering new adapter (cx88[1])
DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...

 

lsmod vypis modulu cx

cx22702                10372  1
cx88_dvb               26500  0
cx88_vp3054_i2c         7168  1 cx88_dvb
videobuf_dvb           11908  1 cx88_dvb
dvb_core               93496  2 cx88_dvb,videobuf_dvb
cx88_alsa              15752  0
cx8802                 20100  1 cx88_dvb
cx8800                 38236  0
cx88xx                 83116  4 cx88_dvb,cx88_alsa,cx8802,cx8800
ir_common              56324  1 cx88xx
i2c_algo_bit           10244  2 cx88_vp3054_i2c,cx88xx
v4l2_common            25984  3 tuner,cx8800,cx88xx
videodev               42400  4 tuner,cx8800,cx88xx,v4l2_common
snd_pcm                81672  3 snd_hda_intel,cx88_alsa,snd_pcm_oss
tveeprom               17924  1 cx88xx
btcx_risc               8968  4 cx88_alsa,cx8802,cx8800,cx88xx
videobuf_dma_sg        17284  5 cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx
videobuf_core          23172  5 videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg
snd                    63688  6 snd_hda_intel,cx88_alsa,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
i2c_core               27936  12 dvb_pll,cx22702,cx88_vp3054_i2c,tuner_simple,tuner,cx8800,cx88xx,i2c_algo_bit,v4l2_common,videodev,tveeprom,i2c_nforce2



Odpovědi

[zajdee]

Distribuční jádro, tj. 2.6.26? Nevím, jestli stačí zkompilovat moduly pro v4l. Tahle pci express karta má oficiální podporu od verze jádra 2.6.28 a to je pro její funkčnost potřeba ještě nahrát firmware do /lib/firmware. Na webu projektu video4linux je popsáno, že digitální (dvb) část karty funguje bez problémů, já čekám na dodávku tří kousků, rozcházet je budu zřejmě zítra (ovšem na Ubuntu 9.04 s distribučním jádrem 2.6.28) a docela by mě zamrzelo, kdybych měl doma tři kousky k ničemu :)

[zajdee]

Beru zpět. Spletl jsem si tvou kartu s Leadtek WinFast PXDVR3200 H, pardon.