Dotaz: Linux + SATA DVD napalovacka

[NeoV]

Distro: Kubuntu 9.10 amd64

Ahojte... Vymenil som IDE/ATA DVD napalku za SATA DVD napalku -> HL-DT-ST DVDRAM GH22NS50 <- a akosi na nej nemozem napalovat. CDcka mi okamzite odpaluje (t.j. roztoci cosi zacne zapisovat ale okamzite to padne - zial logy nemam ulozene). DVDcka mi napaluje rychlostou cca 0.4x priemerne:

...
/dev/sr0: "Current Write Speed" is 4.1x1352KBps.              
          0/7838695424 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/7838695424 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
     557056/7838695424 ( 0.0%) @0.1x, remaining 2814:07 RBU 100.0% UBU   3.1%
    1343488/7838695424 ( 0.0%) @0.2x, remaining 1555:37 RBU 100.0% UBU 100.0%
    3145728/7838695424 ( 0.0%) @0.4x, remaining 788:46 RBU 100.0% UBU  15.6% 
    4554752/7838695424 ( 0.1%) @0.3x, remaining 630:39 RBU 100.0% UBU  28.1% 
    6389760/7838695424 ( 0.1%) @0.4x, remaining 531:09 RBU 100.0% UBU  40.6% 
    7929856/7838695424 ( 0.1%) @0.3x, remaining 477:17 RBU 100.0% UBU 100.0% 
    9961472/7838695424 ( 0.1%) @0.4x, remaining 419:08 RBU 100.0% UBU  46.9% 
   11862016/7838695424 ( 0.2%) @0.4x, remaining 395:53 RBU 100.0% UBU  53.1% 
   13336576/7838695424 ( 0.2%) @0.3x, remaining 381:23 RBU 100.0% UBU   3.1% 
   15237120/7838695424 ( 0.2%) @0.4x, remaining 359:24 RBU 100.0% UBU   3.1% 
   17006592/7838695424 ( 0.2%) @0.4x, remaining 352:36 RBU  99.9% UBU  12.5% 
   18972672/7838695424 ( 0.2%) @0.4x, remaining 336:35 RBU 100.0% UBU   3.1% 
   20873216/7838695424 ( 0.3%) @0.4x, remaining 324:36 RBU 100.0% UBU 100.0% 
   22347776/7838695424 ( 0.3%) @0.3x, remaining 326:26 RBU 100.0% UBU  12.5% 
   24150016/7838695424 ( 0.3%) @0.4x, remaining 318:11 RBU 100.0% UBU  12.5% 
   25559040/7838695424 ( 0.3%) @0.3x, remaining 315:52 RBU 100.0% UBU  21.9% 
   27525120/7838695424 ( 0.4%) @0.4x, remaining 312:09 RBU 100.0% UBU  37.5% 
   29360128/7838695424 ( 0.4%) @0.4x, remaining 305:52 RBU 100.0% UBU 100.0% 
   30769152/7838695424 ( 0.4%) @0.3x, remaining 304:30 RBU 100.0% UBU   3.1% 
   32505856/7838695424 ( 0.4%) @0.4x, remaining 304:11 RBU 100.0% UBU   6.2% 
   33947648/7838695424 ( 0.4%) @0.3x, remaining 302:42 RBU 100.0% UBU  28.1% 
   35913728/7838695424 ( 0.5%) @0.4x, remaining 296:55 RBU 100.0% UBU  40.6% 
   37748736/7838695424 ( 0.5%) @0.4x, remaining 296:12 RBU 100.0% UBU 100.0% 
   39092224/7838695424 ( 0.5%) @0.3x, remaining 295:57 RBU 100.0% UBU   3.1% 
   41091072/7838695424 ( 0.5%) @0.4x, remaining 290:58 RBU 100.0% UBU   6.2% 
   42532864/7838695424 ( 0.5%) @0.3x, remaining 293:16 RBU 100.0% UBU   6.2% 

Mate niekto skusenosti s SATA DVD napalkami ??? Je potrebne nieco zmenit ?

Odpovědi

[NeoV]

est enejake info o identifikacii napalovacky v dmesg:

[    1.916434] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.916499] Uniform CD-ROM driver Revision: 3.20
[    1.916602] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.916641] sr 3:0:0:0: Attached scsi generic sg3 type 5

[Begleiter]

V čem to vypaluješ? V K3B? Jinak bych prostě zkusil vypalovat přímo z příkazové řádky (pokud to zvládneš), viz man wodim, resp. man growisofs.

[NeoV]

myslel som ze je to jasne z toho log vypisu... Pouzity bol command:

growisofs -use-the-force-luke=dao -use-the-force-luke=break:1913760  -dvd-compat -speed=4 -Z /dev/sr1=image.iso

toto konkretne som vypaloval medium "DVD+R DL Verbatim 8x" - ale chyba media to nie je... robi to pri vsetkych mediach...

[Begleiter]

Nestačilo by?:

growisofs -dvd-compat -speed=4 -Z /dev/sr0=image.iso

Vyzkoušej to třeba na DVD+RW, abys zbytečně neplýtval médii (penězi). A co vypalování CDček pomocí wodim? Vyzkoušel bych to na nějakém CD-RW médiu.

[NeoV]

Mno toto nevyzera na problem commandu... skor na problemy s ovladacmi jadra... a problemom s SATA optickymi mechanikami pri napalovani.

Stara ATA/IDE napalka:

[62893.331644] usb-storage: device found at 6
[62893.331645] usb-storage: waiting for device to settle before scanning
[62898.330256] usb-storage: device scan complete
[62898.331476] scsi 8:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H54N 1.03 PQ: 0 ANSI: 0
[62898.576938] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[62898.577049] sr 8:0:0:0: Attached scsi CD-ROM sr1
[62898.577108] sr 8:0:0:0: Attached scsi generic sg4 type 5

napaluje beproblemovo:

vavrek@neov:/mnt/lv_data/Install/_Iso-Images$ growisofs -dvd-compat -speed=4 -Z /dev/sr1=ubuntu-9.10-desktop-amd64.iso
WARNING: /dev/sr1 already carries isofs!                                                                              
About to execute 'builtin_dd if=ubuntu-9.10-desktop-amd64.iso of=/dev/sr1 obs=32k seek=0'                             
/dev/sr1: restarting DVD+RW format...                                                                                 
/dev/sr1: "Current Write Speed" is 4.1x1352KBps.                                                                      
    7340032/724353024 ( 1.0%) @1.3x, remaining 9:46 RBU 100.0% UBU   4.7%                                             
   25853952/724353024 ( 3.6%) @4.0x, remaining 4:03 RBU 100.0% UBU  90.8%                                             
   44433408/724353024 ( 6.1%) @4.0x, remaining 3:18 RBU 100.0% UBU  90.8%                                             
...
  675053568/724353024 (93.2%) @4.0x, remaining 0:09 RBU 100.0% UBU  90.8%
  693665792/724353024 (95.8%) @4.0x, remaining 0:05 RBU  91.5% UBU  90.8%
  712146944/724353024 (98.3%) @4.0x, remaining 0:02 RBU  36.4% UBU  90.8%
builtin_dd: 353696*2KB out @ average 3.9x1352KBps
/dev/sr1: flushing cache
/dev/sr1: writing lead-out

Interne pripojena SATA napalka vsak nie:

vavrek@neov:/mnt/lv_data/Install/_Iso-Images$ growisofs -dvd-compat -speed=4 -Z /dev/sr0=ubuntu-9.10-desktop-amd64.iso
WARNING: /dev/sr0 already carries isofs!                                                                              
About to execute 'builtin_dd if=ubuntu-9.10-desktop-amd64.iso of=/dev/sr0 obs=32k seek=0'                             
/dev/sr0: restarting DVD+RW format...                                                                                 
/dev/sr0: "Current Write Speed" is 4.1x1352KBps.                                                                      
     524288/724353024 ( 0.1%) @0.1x, remaining 92:02 RBU 100.0% UBU   0.0%                                            
    1146880/724353024 ( 0.2%) @0.1x, remaining 84:04 RBU 100.0% UBU 100.0%                                            
    1998848/724353024 ( 0.3%) @0.2x, remaining 66:15 RBU 100.0% UBU 100.0%
    2424832/724353024 ( 0.3%) @0.1x, remaining 69:28 RBU 100.0% UBU   0.0%
    3604480/724353024 ( 0.5%) @0.3x, remaining 59:59 RBU 100.0% UBU 100.0%
    4292608/724353024 ( 0.6%) @0.1x, remaining 58:42 RBU 100.0% UBU  28.1%
    4816896/724353024 ( 0.7%) @0.1x, remaining 59:45 RBU 100.0% UBU 100.0%
    5472256/724353024 ( 0.8%) @0.1x, remaining 61:18 RBU 100.0% UBU 100.0%
    6029312/724353024 ( 0.8%) @0.1x, remaining 61:33 RBU  99.9% UBU 100.0%
    6586368/724353024 ( 0.9%) @0.1x, remaining 61:45 RBU 100.0% UBU   0.0%
...

Zaujimave je ako skace UBU hodnota...