Dotaz: nejde mount foťáku Olympus C-700 Ultra Zoom

[Howard]

V openSUSE 11.2 mám problém s přimountováním foťáku Olympus C-700 Ultra Zoom. Dokud tam byl openSUSE 11.2, tak to fungovalo. Nepomohlo dát to na jiné USB ani dát do foťáku jinou kartu. Normálně by se měla na foťáku rozblikat dioda hned po připojení, to se ale neděje. Ve Windows to funguje. Bohužel nemám nikde další openSUSE 11.2, abych vyloučil chybu systému.
PC: Notebook Fujitsu Siemens Esprimo Mobile V6535

Zde je výpis /var/log/messages:

Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.630593] usb 7-1.1: New USB device found, idVendor=07b4, idProduct=0105                                                                    
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.630615] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3                                                               
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.630630] usb 7-1.1: Product: C-700 Ultra Zoom    
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.630641] usb 7-1.1: Manufacturer: OLYMPUS        
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.630651] usb 7-1.1: SerialNumber: 000184401128   
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.630879] usb 7-1.1: configuration #1 chosen from 1 choice                                                                                  
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.632943] scsi9 : SCSI emulation for USB Mass Storage devices                                                                               
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.633219] usb-storage: device found at 8          
Dec 30 12:04:00 linux-bvj6 kernel: [ 9540.633226] usb-storage: waiting for device to settle before scanning                                                                         
Dec 30 12:04:02 linux-bvj6 pcscd: ifdwrapper.c:469:IFDStatusICC() Card not transacted: 612
Dec 30 12:04:02 linux-bvj6 pcscd: eventhandler.c:333:EHStatusHandlerThread() Error communicating to: Towitoko Chipdrive USB 00 00                                                   
Dec 30 12:04:03 linux-bvj6 pcscd: ifdwrapper.c:469:IFDStatusICC() Card not transacted: 612
Dec 30 12:04:03 linux-bvj6 pcscd: eventhandler.c:333:EHStatusHandlerThread() Error communicating to: Towitoko Chipdrive USB 00 00                                                   
Dec 30 12:04:05 linux-bvj6 pcscd: ifdwrapper.c:469:IFDStatusICC() Card not transacted: 612
Dec 30 12:04:05 linux-bvj6 pcscd: eventhandler.c:333:EHStatusHandlerThread() Error communicating to: Towitoko Chipdrive USB 00 00 

---

---

Odpovědi

[Howard]

To jsem z toho blázen. Týden po položení dotazu to začlo fungovat.
A dnes najednou zase přestalo. Ještě předevčírem jsem ten foťák měl připojený v pohodě a teď zase nic.

Alespoň bych potřeboval poradit, jak ho přimountovat ručně, nevím co tam napsat:
mount -t vfat /dev/nevim /media/fotak

[Patrik Uhrak]

Zdravim,

zariadenie ziskas pomocou nasledovne.

 

1. Spustis v terminaly

udevadm monitor

2. Pripojis zariadenie

 

Vyhodi ti to informacie na niekolko riadkov medzi ktorymi budes hladat. Mne to napr. pri usb kluci da toto:

root@debian:~# udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[1270667180.205900] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3 (usb)
KERNEL[1270667180.207996] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0 (usb)
KERNEL[1270667180.208376] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9 (scsi)
KERNEL[1270667180.208418] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/scsi_host/host9 (scsi_host)
UDEV  [1270667180.211725] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3 (usb)
UDEV  [1270667180.584887] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0 (usb)
UDEV  [1270667180.585430] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9 (scsi)
UDEV  [1270667180.586849] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[1270667185.209650] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0 (scsi)
KERNEL[1270667185.209825] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[1270667185.210249] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
UDEV  [1270667185.210294] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0 (scsi)
KERNEL[1270667185.210331] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[1270667185.211067] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[1270667185.212679] change   /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UDEV  [1270667185.216102] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UDEV  [1270667185.217216] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
UDEV  [1270667185.217541] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
UDEV  [1270667185.222277] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
UDEV  [1270667185.222924] change   /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[1270667185.351830] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[1270667185.351894] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb1 (block)
KERNEL[1270667185.351934] add      /devices/virtual/bdi/8:16 (bdi)
UDEV  [1270667185.352935] add      /devices/virtual/bdi/8:16 (bdi)
UDEV  [1270667186.814141] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
UDEV  [1270667186.846942] add      /devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb1 (block)

Na poslednom riadku mam sdb1 . Takze by som moj kluc pripojil mount -t vfat /dev/sdb1 /mnt/kluc . Ale da sa mozno aj inak :)

[Howard]

Dik, vypise to tohle:

KERNEL[1270671673.801569] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2 (usb)
KERNEL[1270671673.804396] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0 (usb)
KERNEL[1270671673.806423] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21 (scsi)
KERNEL[1270671673.806458] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21/scsi_host/host21 (scsi_host)
UDEV  [1270671673.809995] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2 (usb)
UDEV  [1270671673.810041] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0 (usb)
UDEV  [1270671673.810082] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21 (scsi)
UDEV  [1270671673.810107] add      /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21/scsi_host/host21 (scsi_host)
KERNEL[1270671674.118563] remove   /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21/scsi_host/host21 (scsi_host)
KERNEL[1270671674.118605] remove   /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21 (scsi)
UDEV  [1270671674.119369] remove   /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21/scsi_host/host21 (scsi_host)
UDEV  [1270671674.119402] remove   /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/host21 (scsi)

A z toho nepoznam nic. Nejake napady?

[Patrik Uhrak]

Z toho zial nic, tam sa ziadne blokove zariadenie nevytvorilo. Jedine, co ti este mozem poradit, ak nemas este, nainstaluj si pcsc-tools a vyskusaj sa na to pozriet. Mozno to da nejaku zmysluplnu hlasku.

[Patrik Uhrak]

Este mozno ti pomoze toto: http://www.qbik.ch/usb/devices/showdev.php?id=2315 . To tvoje zariadenie je tam v databaze tiez a pracuje skvele podla statusu. No pri tomto spomenutom bolo poznamenane, ze pripajat vypnuty a potom az zapnut, po pripojeni. Mozno to pomoze, mozno nie.

[Dalibor Smolík]

Také mi pomohlo tohle řešení (komentáře až od 15.1.2008)

[Howard]

Dekuji za predesle rady, obcas to fungovalo, ale vetsinou spis ne, nevim proc.

Nakonec pomohl upgrade na KDE 4.4.4.