Dotaz: DVB-T ASUS My Cinema P7131, Debian, Nemaka to :-(

[Smajchl]

Příloha:

• dmesg (3105 bytů)

Ahoj, potrebuju poradit, hledal sem to a nasel se spousty veci ale reseni tohoto problemu ne, jen nezodpovezeny dotazy podobnyho typu, treba mi nekdo chytrej poradi tady.

Mam Debian Stable, sice je pro i686 a je to na Dualcore intelu, ale to by snad nemelo vadit, nemam CD rom, tak to nemuzu preinstalovat.

TV kartu ASUS My Cinema P7131H, firmware sem nainstaloval a zda se ze ho to sezralo:

[12617.053810] tda1004x: setting up plls for 48MHz sampling clock
[12619.640275] tda1004x: timeout waiting for DSP ready
[12619.683252] tda1004x: found firmware revision 0 -- invalid
[12619.683256] tda1004x: trying to boot from eeprom
[12622.365256] tda1004x: timeout waiting for DSP ready
[12622.408716] tda1004x: found firmware revision 0 -- invalid
[12622.408720] tda1004x: waiting for firmware upload...
[12622.408723] firmware: requesting dvb-fe-tda10046.fw
[12637.269856] tda1004x: found firmware revision 20 -- ok
[12649.329983] tda1004x: setting up plls for 48MHz sampling clock
[12649.636060] tda1004x: found firmware revision 20 -- ok
[12685.598247] tda1004x: setting up plls for 48MHz sampling clock
[12685.961649] tda1004x: found firmware revision 20 -- ok
[14841.384978] tda1004x: setting up plls for 48MHz sampling clock
[14841.728693] tda1004x: found firmware revision 20 -- ok
[14853.905864] tda1004x: setting up plls for 48MHz sampling clock
[14854.205350] tda1004x: found firmware revision 20 -- ok

(prikladam jako soubor delsi vypis inicializace z dmesg)

Problem ale je ze pri pokusu o nalezeni programu v Kaffeine to sice jede a ukazuje ruznej signal a obcas problikne svetyko Tuned, avsak do konzole to vypisuje toto:

smajchl@smajchl:~$ kaffeine 
/dev/dvb/adapter0/frontend0 : opened ( Philips TDA10046H DVB-T )
0 EPG plugins loaded for device 0:0.
Loaded epg data : 0 events (1 msecs)
smajchl@smajchl:~$ DvbCam::probe(): /dev/dvb/adapter0/ca0: : není souborem ani adresářem
Using DVB device 0:0 "Philips TDA10046H DVB-T"
tuning DVB-T to 634000000 Hz
inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0
...............

Not able to lock to the signal on the given frequency
Frontend closed
dvbsi: Cant tune DVB
Using DVB device 0:0 "Philips TDA10046H DVB-T"
tuning DVB-T to 674000000 Hz
inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0
...............

Not able to lock to the signal on the given frequency
Frontend closed
dvbsi: Cant tune DVB
Using DVB device 0:0 "Philips TDA10046H DVB-T"
tuning DVB-T to 730000000 Hz
inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0
...............

Not able to lock to the signal on the given frequency
Frontend closed
dvbsi: Cant tune DVB
Using DVB device 0:0 "Philips TDA10046H DVB-T"
tuning DVB-T to 778000000 Hz
inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0
...............

Not able to lock to the signal on the given frequency
Frontend closed
dvbsi: Cant tune DVB
Using DVB device 0:0 "Philips TDA10046H DVB-T"
tuning DVB-T to 818000000 Hz
inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:2 hier:0
...............

Not able to lock to the signal on the given frequency
Frontend closed
dvbsi: Cant tune DVB
Transponders: 5
dvbsi: The end :)
Channels found: 0

A nakonec to dobehne a zadne programy to nenajde, zkousel sem jeste kdetv a podobny programy taky bez vysledku.

PS: v Kaffeine sem nastavil CR-Praha jako lokalitu, nevim presne jak to funguje... Prosim pomozte mi. Jadro mam 2.6.26 proste to nejnovejsi co je ve stable Debianu.

Odpovědi

[Smajchl]

A odpovim si sam, ze jsem najivka najivni, kdyz jsem si myslel, ze kus dratu bude v prizemi domu stacit, jsem zvyklej ze v praze staci opravdu jen drat - to jo ale predtim sem bydlel nahore kde je prima viditelnost, po pripojeni pokojove anteny do spravne dirky, ano to byl taky problem, to hraje nadherne, super... radost.

Jeste nevim jak poustet analog, to ale zatim nepotrebuju a hlavne nevim jak zprovoznit radio, /dev/radio0 tam je, ale gnomeradio nehraje, kradio ma problem se spustit a konzolovej program radio stejne jako plugin do gkrellmu taky nevydavaj zvuk, objevil sem toto:

There is an insmod parameter for saa7134 "radio_nr" that specifies the number of radion device and ther is probably no "radio" flag parameter, by which you can turn the support on/off (use modinfo for more info). But if you want to use a radio and your doesn't have an EEPROM, you must set the "card" parameter explicitly and the board you set MUST have a builtin radion. Otherwise the radio just won't play, and no error message appears.

(tady)

avsak nevim jako teda co mam tomu modulu nastavit, cislo radio karty? to je co? A v jakym tvaru ma bejt ten model karty taky nechapu, tak kdyby mi nekdo s timto pomohl byl bych rad Chtel bych si obcas nahrat neco z Radia 1. I kdyz asi pujde i ukladat internetovej stream, to je fakt....

[Rydlo]

Na radio staci spustit sox aby posilal zvuk z jedny zvukovky do druhy, je to popsany tady v hardware sekci u tyhle tv karty.