AbcLinuxu:/ Poradna / Linuxová poradna / Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Štítky: bez, CUPS, distribuce, font, For, hardware, hdd, HP, nesmysly, PC, problém, RAM, RAW, Slackware, software, status, Sun, test, tisk, tiskárny

Dotaz: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

10.3.2013 22:09 Pavel David | skóre: 11
Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Přečteno: 800×

Odpovědět | Admin

Dobrý den, mám starou tiskárnu HP DeskJet 895 CXI. Na PC P 166Mhz, 64 MB Ram a 540 MB Hdd se snažím rozběhat printserver. Distribuce je slackware 11. Podařilo se mi vše co jsem potřeboval rozchodit až na tisk pod cupsem. V tomto distru je verze cups-1.1.23 . Na printserver se přihlásím přes webové rozhraní, přidám tiskárnu. Bohužel se mi nedaří vytisknout zkušební stránka. Pokud chci restartovat tiskovou úlohu, tak hodtanu následující chybu "client-error-not-possible". Zapl jsem debug mod cupsu, ale moc z toho chytrý nejsem. chyběli mi tam některé knihovny, ty jsem již doinstaloval. Pokud pošlu něco na tiskárnu v Raw formátě, tak tiskne nesmysly. Pokud se snažím tisknout na tiskárně HP Laser Jet 1100, kterou jsem také nastavil a je k PC připojena přes Jet Direct, tak se na ní rozbliká kontolka a zase zhasne, bez toho aby cokoliv vytiskla.

V systému jsou nainstalované následující balíčky:

a2ps-4.13b-i386-2
aaa_base-11.0.0-noarch-2
aaa_elflibs-11.0.0-i486-9
acpid-1.0.4-i486-2
apache-1.3.37-i486-2
apcupsd-3.14.1-i486-1sl
apmd-3.0.2-i386-1
autofs-3.1.7-i386-1
bash-3.1.017-i486-1
bin-11.0-i486-3
bind-9.3.2_P1-i486-1
bzip2-1.0.3-i486-3
coreutils-5.97-i486-1
cpio-2.5-i386-1
cups-1.1.23-i486-4
cxxlibs-6.0.3-i486-1
cyrus-sasl-2.1.22-i486-1
dcron-2.3.3-i486-5
devs-2.3.1-noarch-25
dhcp-3.0.4-i486-2
dhcpcd-2.0.4-i486-2
diffutils-2.8.1-i486-3
e2fsprogs-1.38-i486-2
elvis-2.2_0-i486-2
espgs-8.15.3svn185-i486-1
etc-11.0-noarch-2
gawk-3.1.5-i486-3
genpower-1.0.5-i486-1
glibc-solibs-2.3.6-i486-6
glibc-zoneinfo-2.3.6-noarch-6
gnu-gs-fonts-6.0-noarch-1
gpm-1.20.1-i486-2
grep-2.5-i486-3
groff-1.19.2-i486-1
gzip-1.3.5-i486-1
hdparm-6.6-i486-1
hotplug-2004_09_23-noarch-11
hpijs-2.1.4-i486-1
hplip-1.7.4a-i486-1_rlw
iproute2-2.6.16_060323-i486-1
iptables-1.3.5-i486-2
iptraf-2.7.0-i386-1
isapnptools-1.26-i386-1
joe-3.5-i486-1
kbd-1.12-i486-2
kernel-ide-2.4.33.3-i486-1
kernel-modules-2.4.33.3-i486-1
less-394-i486-1
lilo-22.7.1-i486-2
loadlin-1.6c-i386-1
lsof-4.76-i486-1
man-1.6c-i486-2
man-pages-2.39-noarch-1
mc-4.6.1-i486-2
mkinitrd-1.0.1-i486-3
module-init-tools-3.2.2-i486-2
nc-1.10-i386-1
nmap-4.11-i486-1
ntp-4.2.2p3-i486-1
openldap-client-2.3.27-i486-1
openssh-4.4p1-i486-1
openssl-0.9.8d-i486-1
openssl-solibs-0.9.8d-i486-1
pciutils-2.2.3-i486-2
pcmcia-cs-3.2.8-i486-3
php-4.4.4-i486-3
pidentd-3.0.19-i486-1
pkgtools-11.0.0-i486-4
portmap-5.0-i486-3
procps-3.2.7-i486-1
samba-3.0.23c-i486-1
sed-4.1.5-i486-1
shadow-4.0.3-i486-13
sysklogd-1.4.1-i486-9
syslinux-2.13-i486-1
sysvinit-2.84-i486-69
tar-1.15.1-i486-2
tcpdump-3.9.4-i486-2
tcpip-0.17-i486-39
traceroute-1.4a12-i386-2
udev-097-i486-10
utempter-1.1.3-i486-1
util-linux-2.12r-i486-5
vim-7.0.109-i486-1
wget-1.10.2-i486-2
whois-4.7.15-i486-1
wireless-tools-28-i486-3
wpa_supplicant-0.4.9-i486-1
xfsprogs-2.8.10_1-i486-1
zsh-4.2.6-i486-1

Výpis ze souboru /var/log/cups/error_log

D [10/Mar/2013:21:57:23 +0100] AcceptClient: 5 from 192.168.1.100:631.
D [10/Mar/2013:21:57:23 +0100] ReadClient: 5 GET /printers HTTP/1.1
D [10/Mar/2013:21:57:23 +0100] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 985
I [10/Mar/2013:21:57:23 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=985)
D [10/Mar/2013:21:57:23 +0100] SendCommand: 5 file=8
D [10/Mar/2013:21:57:23 +0100] AcceptClient: 7 from localhost:631.
D [10/Mar/2013:21:57:23 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:23 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:23 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:23 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:23 +0100] CloseClient: 7
D [10/Mar/2013:21:57:26 +0100] ReadClient: 5 GET /printers/HP895CXI?op=print-test-page HTTP/1.1
D [10/Mar/2013:21:57:26 +0100] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 986
I [10/Mar/2013:21:57:26 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=986)
D [10/Mar/2013:21:57:26 +0100] SendCommand: 5 file=8
D [10/Mar/2013:21:57:26 +0100] AcceptClient: 7 from localhost:631.
D [10/Mar/2013:21:57:26 +0100] ReadClient: 7 POST /printers/HP895CXI HTTP/1.1
D [10/Mar/2013:21:57:26 +0100] print_job: request file type is application/postscript.
D [10/Mar/2013:21:57:26 +0100] check_quotas: requesting-user-name = 'root'
D [10/Mar/2013:21:57:26 +0100] print_job: requesting-user-name = 'root'
D [10/Mar/2013:21:57:26 +0100] Adding default job-sheets values "none,none"...
I [10/Mar/2013:21:57:26 +0100] Adding start banner page "none" to job 27.
I [10/Mar/2013:21:57:26 +0100] Adding end banner page "none" to job 27.
I [10/Mar/2013:21:57:26 +0100] Job 27 queued on 'HP895CXI' by 'root'.
D [10/Mar/2013:21:57:26 +0100] Job 27 hold_until = 0
D [10/Mar/2013:21:57:26 +0100] StartJob(27, 0x80985d0)
D [10/Mar/2013:21:57:26 +0100] StartJob() id = 27, file = 0/1
D [10/Mar/2013:21:57:26 +0100] job-sheets=none,none
D [10/Mar/2013:21:57:26 +0100] banner_page = 0
D [10/Mar/2013:21:57:26 +0100] StartJob: argv = "HP895CXI","27","root","Test Page","1","","/var/spool/cups/d00027-001"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[2]="USER=root"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[3]="CHARSET=utf-8"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[4]="LANG=cs"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[5]="PPD=/etc/cups/ppd/HP895CXI.ppd"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[11]="PRINTER=HP895CXI"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[14]="CUPS_SERVER=localhost"
D [10/Mar/2013:21:57:26 +0100] StartJob: envp[15]="IPP_PORT=631"
D [10/Mar/2013:21:57:26 +0100] StartJob: statusfds = [ 9 10 ]
D [10/Mar/2013:21:57:26 +0100] StartJob: filterfds[1] = [ 11 -1 ]
D [10/Mar/2013:21:57:26 +0100] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [10/Mar/2013:21:57:26 +0100] StartJob: filterfds[0] = [ 12 13 ]
D [10/Mar/2013:21:57:26 +0100] start_process("/usr/lib/cups/filter/pstops", 0xbffeeae0, 0xbffede50, 11, 13, 10)
I [10/Mar/2013:21:57:26 +0100] Started filter /usr/lib/cups/filter/pstops (PID 987) for job 27.
D [10/Mar/2013:21:57:26 +0100] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [10/Mar/2013:21:57:26 +0100] StartJob: filterfds[1] = [ 11 14 ]
D [10/Mar/2013:21:57:26 +0100] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffeeae0, 0xbffede50, 12, 14, 10)
I [10/Mar/2013:21:57:26 +0100] Started filter /usr/lib/cups/filter/foomatic-rip (PID 988) for job 27.
D [10/Mar/2013:21:57:26 +0100] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [10/Mar/2013:21:57:26 +0100] StartJob: filterfds[0] = [ -1 12 ]
D [10/Mar/2013:21:57:26 +0100] start_process("/usr/lib/cups/backend/parallel", 0xbffeeae0, 0xbffede50, 11, 12, 10)
I [10/Mar/2013:21:57:26 +0100] Started backend /usr/lib/cups/backend/parallel (PID 989) for job 27.
D [10/Mar/2013:21:57:26 +0100] ProcessIPPRequest: 7 status_code=0
E [10/Mar/2013:21:57:26 +0100] PID 988 stopped with status 22!
D [10/Mar/2013:21:57:26 +0100] [Job 27] /usr/lib/cups/filter/foomatic-rip: No such file or directory
D [10/Mar/2013:21:57:27 +0100] CloseClient: 7
D [10/Mar/2013:21:57:27 +0100] [Job 27] Page = 612x792; 18,36 to 594,783
D [10/Mar/2013:21:57:27 +0100] [Job 27] slowcollate=0, slowduplex=0, sloworder=0
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%BoundingBox: 0 0 612 792
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%Pages: 1
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%LanguageLevel: 1
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%DocumentData: Clean7Bit
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%Creator: Michael Sweet, Easy Software Products
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%CreationDate: May 11, 1999
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%Title: Test Page
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%EndComments
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%BeginProlog
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%BeginResource procset testprint 1.1 0
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%EndResource
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%EndProlog
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%Page: 1 1
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%Page: 1 1
D [10/Mar/2013:21:57:27 +0100] [Job 27] pw = 576.0, pl = 747.0
D [10/Mar/2013:21:57:27 +0100] [Job 27] PageLeft = 18.0, PageRight = 594.0
D [10/Mar/2013:21:57:27 +0100] [Job 27] PageTop = 783.0, PageBottom = 36.0
D [10/Mar/2013:21:57:27 +0100] [Job 27] PageWidth = 612.0, PageLength = 792.0
D [10/Mar/2013:21:57:27 +0100] [Job 27] 0 %%EOF
D [10/Mar/2013:21:57:27 +0100] [Job 27] Saw EOF!
D [10/Mar/2013:21:57:27 +0100] UpdateJob: job 27, file 0 is complete.
D [10/Mar/2013:21:57:27 +0100] CancelJob: id = 27
D [10/Mar/2013:21:57:27 +0100] StopJob: id = 27, force = 0
D [10/Mar/2013:21:57:27 +0100] StopJob: printer state is 3
D [10/Mar/2013:21:57:28 +0100] ReadClient: 5 GET /printers/HP895CXI HTTP/1.1
D [10/Mar/2013:21:57:28 +0100] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 990
I [10/Mar/2013:21:57:28 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=990)
D [10/Mar/2013:21:57:28 +0100] SendCommand: 5 file=8
D [10/Mar/2013:21:57:29 +0100] AcceptClient: 7 from localhost:631.
D [10/Mar/2013:21:57:29 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:29 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:29 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:29 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:29 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:29 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:29 +0100] CloseClient: 7
D [10/Mar/2013:21:57:32 +0100] ReadClient: 5 GET /printers/HP895CXI?which_jobs=completed HTTP/1.1
D [10/Mar/2013:21:57:32 +0100] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 991
I [10/Mar/2013:21:57:32 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=991)
D [10/Mar/2013:21:57:32 +0100] SendCommand: 5 file=8
D [10/Mar/2013:21:57:32 +0100] AcceptClient: 7 from localhost:631.
D [10/Mar/2013:21:57:32 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:32 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:32 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:32 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:33 +0100] ReadClient: 7 POST / HTTP/1.1
D [10/Mar/2013:21:57:33 +0100] ProcessIPPRequest: 7 status_code=1
D [10/Mar/2013:21:57:33 +0100] CloseClient: 7
D [10/Mar/2013:21:57:34 +0100] ReadClient: 5 GET /jobs/?op=restart-job&job_id=25&job_printer_uri=/printers/HP895CXI HTTP/1.1
D [10/Mar/2013:21:57:34 +0100] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 992
I [10/Mar/2013:21:57:34 +0100] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=992)
D [10/Mar/2013:21:57:34 +0100] SendCommand: 5 file=8
D [10/Mar/2013:21:57:34 +0100] AcceptClient: 7 from localhost:631.
D [10/Mar/2013:21:57:34 +0100] ReadClient: 7 POST /jobs HTTP/1.1
E [10/Mar/2013:21:57:34 +0100] restart_job: job #25 cannot be restarted - no files!
D [10/Mar/2013:21:57:34 +0100] Sending error: client-error-not-possible
D [10/Mar/2013:21:57:34 +0100] ProcessIPPRequest: 7 status_code=404
D [10/Mar/2013:21:57:34 +0100] CloseClient: 7

Soubor /etc/printers.conf

# Printer configuration file for CUPS v1.1.23
# Written by cupsd on Sun Mar 10 21:22:58 2013
(Printer HP1100)
Info 
Location 
DeviceURI socket://192.168.1.99:9100
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
(/Printer)
(DefaultPrinter HP895CXI)
Info 
Location 
DeviceURI parallel:/dev/lp0
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
(/Printer)

místo špičatých závorek jsou použity kulaté.

Řešení dotazu:

Komentář #4 (R, 1 hlasů)

Nástroje: Začni sledovat (0) ?

Odpovědi

10.3.2013 22:52 Ondřej Kubečka | skóre: 29 | blog: datlovo | Ulm
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Takhle průletem mi padl do oka tenhle řádek z Vašeho logu:

D [10/Mar/2013:21:57:26 +0100] [Job 27] /usr/lib/cups/filter/foomatic-rip: No such file or directory

Nemůže najít filtr pro zpracování úlohy. Bohužel nemám po ruce systém se Slackem 11 (máte nějaký závažný důvod, proč se držet této docela historické verze? Na tom HW by měl jít nainstalovat i aktuální Slack, resp. to, co z něj potřebujete pro tisk).

Na 14.0 je ta cesta link na soubor /usr/bin/foomatic-rip, který patří balíku foomatic-filters. Podle manifestu 11.0 by to mělo být v hpijs, ale možná bez toho linku? Popř. nemlátí se Vám tam náhodou hpijs a Vaše verze hplip?

http://prirucka.ujc.cas.cz/?ref=785&id=790.

11.3.2013 01:15 Pavel David | skóre: 11
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Dobrý večer, zkontroloval jsem cestu k souboru dle chyby v logu. foomatic-rip se tam nachází. Je to perlový script, v systému pearl nebyl nainstalován. Doinstaloval jsem perl. Přes Jetdirect tisknout mohu, ale přes tu inkoustovku , která je připoojená k printserveru přes paralelní kabel to nejde.

D [11/Mar/2013:01:05:20 +0100] ReadClient: 7 GET /printers/HP895CXI?op=print-test-page HTTP/1.1
D [11/Mar/2013:01:05:20 +0100] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 741
I [11/Mar/2013:01:05:20 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=741)
D [11/Mar/2013:01:05:20 +0100] SendCommand: 7 file=9
D [11/Mar/2013:01:05:20 +0100] AcceptClient: 8 from localhost:631.
D [11/Mar/2013:01:05:20 +0100] ReadClient: 8 POST /printers/HP895CXI HTTP/1.1
D [11/Mar/2013:01:05:20 +0100] print_job: request file type is application/postscript.
D [11/Mar/2013:01:05:20 +0100] check_quotas: requesting-user-name = 'root'
D [11/Mar/2013:01:05:20 +0100] print_job: requesting-user-name = 'root'
D [11/Mar/2013:01:05:20 +0100] Adding default job-sheets values "none,none"...
I [11/Mar/2013:01:05:20 +0100] Adding start banner page "none" to job 38.
I [11/Mar/2013:01:05:20 +0100] Adding end banner page "none" to job 38.
I [11/Mar/2013:01:05:20 +0100] Job 38 queued on 'HP895CXI' by 'root'.
D [11/Mar/2013:01:05:20 +0100] Job 38 hold_until = 0
D [11/Mar/2013:01:05:20 +0100] StartJob(38, 0x809e4a8)
D [11/Mar/2013:01:05:20 +0100] StartJob() id = 38, file = 0/1
D [11/Mar/2013:01:05:20 +0100] job-sheets=none,none
D [11/Mar/2013:01:05:20 +0100] banner_page = 0
D [11/Mar/2013:01:05:20 +0100] StartJob: argv = "HP895CXI","38","root","Test Page","1","","/var/spool/cups/d00038-001"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[2]="USER=root"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[3]="CHARSET=utf-8"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[4]="LANG=cs"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[5]="PPD=/etc/cups/ppd/HP895CXI.ppd"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[11]="PRINTER=HP895CXI"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[14]="CUPS_SERVER=localhost"
D [11/Mar/2013:01:05:20 +0100] StartJob: envp[15]="IPP_PORT=631"
D [11/Mar/2013:01:05:20 +0100] StartJob: statusfds = [ 10 11 ]
D [11/Mar/2013:01:05:20 +0100] StartJob: filterfds[1] = [ 12 -1 ]
D [11/Mar/2013:01:05:20 +0100] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [11/Mar/2013:01:05:20 +0100] StartJob: filterfds[0] = [ 13 14 ]
D [11/Mar/2013:01:05:20 +0100] start_process("/usr/lib/cups/filter/pstops", 0xbffeeae0, 0xbffede50, 12, 14, 11)
I [11/Mar/2013:01:05:20 +0100] Started filter /usr/lib/cups/filter/pstops (PID 742) for job 38.
D [11/Mar/2013:01:05:20 +0100] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [11/Mar/2013:01:05:20 +0100] StartJob: filterfds[1] = [ 12 15 ]
D [11/Mar/2013:01:05:20 +0100] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffeeae0, 0xbffede50, 13, 15, 11)
I [11/Mar/2013:01:05:20 +0100] Started filter /usr/lib/cups/filter/foomatic-rip (PID 743) for job 38.
D [11/Mar/2013:01:05:20 +0100] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [11/Mar/2013:01:05:20 +0100] StartJob: filterfds[0] = [ -1 13 ]
D [11/Mar/2013:01:05:20 +0100] start_process("/usr/lib/cups/backend/parallel", 0xbffeeae0, 0xbffede50, 12, 13, 11)
I [11/Mar/2013:01:05:20 +0100] Started backend /usr/lib/cups/backend/parallel (PID 744) for job 38.
D [11/Mar/2013:01:05:20 +0100] ProcessIPPRequest: 8 status_code=0
D [11/Mar/2013:01:05:20 +0100] [Job 38] perl: warning: Setting locale failed.
D [11/Mar/2013:01:05:20 +0100] [Job 38] perl: warning: Please check that your locale settings:
D [11/Mar/2013:01:05:20 +0100] [Job 38] LANGUAGE = (unset),
D [11/Mar/2013:01:05:20 +0100] [Job 38] LC_ALL = (unset),
D [11/Mar/2013:01:05:20 +0100] [Job 38] LANG = "cs"
D [11/Mar/2013:01:05:20 +0100] [Job 38] are supported and installed on your system.
D [11/Mar/2013:01:05:20 +0100] [Job 38] perl: warning: Falling back to the standard locale ("C").
D [11/Mar/2013:01:05:20 +0100] CloseClient: 8
D [11/Mar/2013:01:05:20 +0100] [Job 38] Page = 595x842; 10,36 to 585,833
D [11/Mar/2013:01:05:20 +0100] [Job 38] slowcollate=0, slowduplex=0, sloworder=0
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%BoundingBox: 0 0 612 792
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%Pages: 1
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%LanguageLevel: 1
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%DocumentData: Clean7Bit
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%Creator: Michael Sweet, Easy Software Products
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%CreationDate: May 11, 1999
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%Title: Test Page
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%EndComments
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%BeginProlog
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%BeginResource procset testprint 1.1 0
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%EndResource
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%EndProlog
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%Page: 1 1
D [11/Mar/2013:01:05:20 +0100] [Job 38] 0 %%Page: 1 1
D [11/Mar/2013:01:05:20 +0100] [Job 38] pw = 575.6, pl = 797.0
D [11/Mar/2013:01:05:20 +0100] [Job 38] PageLeft = 9.7, PageRight = 585.3
D [11/Mar/2013:01:05:20 +0100] [Job 38] PageTop = 833.0, PageBottom = 36.0
D [11/Mar/2013:01:05:20 +0100] [Job 38] PageWidth = 595.0, PageLength = 842.0
D [11/Mar/2013:01:05:26 +0100] [Job 38] foomatic-rip version $Revision$ running...
D [11/Mar/2013:01:05:26 +0100] [Job 38] Parsing PPD file ...
D [11/Mar/2013:01:05:26 +0100] [Job 38] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option ColorSpace
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option Resolution
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option PageSize
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option PageRegion
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option Model
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option PrintoutMode
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option ImageableArea
D [11/Mar/2013:01:05:26 +0100] [Job 38] Added option PaperDimension
D [11/Mar/2013:01:05:27 +0100] [Job 38] Added option Quality
D [11/Mar/2013:01:05:27 +0100] [Job 38] Added option Font
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] Parameter Summary
D [11/Mar/2013:01:05:27 +0100] [Job 38] -----------------
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] Spooler: cups
D [11/Mar/2013:01:05:27 +0100] [Job 38] Printer: HP895CXI
D [11/Mar/2013:01:05:27 +0100] [Job 38] Shell: /bin/sh
D [11/Mar/2013:01:05:27 +0100] [Job 38] PPD file: /etc/cups/ppd/HP895CXI.ppd
D [11/Mar/2013:01:05:27 +0100] [Job 38] ATTR file: 
D [11/Mar/2013:01:05:27 +0100] [Job 38] Printer model: HP DeskJet 895C Foomatic/hpijs (recommended)
D [11/Mar/2013:01:05:27 +0100] [Job 38] Job title: Test Page
D [11/Mar/2013:01:05:27 +0100] [Job 38] File(s) to be printed: 
D [11/Mar/2013:01:05:27 +0100] [Job 38] (STDIN)
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] ================================================
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] File: (STDIN)
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] ================================================
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] Reading PostScript input ...
D [11/Mar/2013:01:05:27 +0100] [Job 38] --> This document is DSC-conforming!
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] -----------
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%BeginProlog
D [11/Mar/2013:01:05:27 +0100] [Job 38] 0 %%EOF
D [11/Mar/2013:01:05:27 +0100] [Job 38] Saw EOF!
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%EndProlog
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] -----------
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%BeginSetup
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%BeginFeature: *PrintoutMode Normal
D [11/Mar/2013:01:05:27 +0100] [Job 38] Option: PrintoutMode=Normal --> Setting option
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [11/Mar/2013:01:05:27 +0100] [Job 38] Option: PrintoutMode=Normal --> Setting option
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%BeginFeature: *Quality FromPrintoutMode
D [11/Mar/2013:01:05:27 +0100] [Job 38] Option: Quality=FromPrintoutMode --> Setting option
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [11/Mar/2013:01:05:27 +0100] [Job 38] Option: Quality=FromPrintoutMode --> Setting option
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%BeginFeature: *PageSize A4
D [11/Mar/2013:01:05:27 +0100] [Job 38] Option: PageSize=A4 --> Setting option
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %% FoomaticRIPOptionSetting: PageSize=A4
D [11/Mar/2013:01:05:27 +0100] [Job 38] Option: PageSize=A4 --> Setting option
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%EndSetup
D [11/Mar/2013:01:05:27 +0100] [Job 38] Inserting PostScript code for CUPS' page accounting
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] -----------
D [11/Mar/2013:01:05:27 +0100] [Job 38] New page:  1 1
D [11/Mar/2013:01:05:27 +0100] [Job 38] Inserting option code into "PageSetup" section.
D [11/Mar/2013:01:05:27 +0100] [Job 38] No page header or page header not DSC-conforming
D [11/Mar/2013:01:05:27 +0100] [Job 38] Stopping search for page header options
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: 
D [11/Mar/2013:01:05:27 +0100] [Job 38] --> Output goes directly to the renderer now.
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] Starting renderer
D [11/Mar/2013:01:05:27 +0100] [Job 38] renderer PID kid4=749
D [11/Mar/2013:01:05:27 +0100] [Job 38] JCL: (job data) 
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="DESKJET 895" -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2 -dIjsUseOutputFD -sOutputFile=- -
D [11/Mar/2013:01:05:27 +0100] [Job 38] gs: error while loading shared libraries: libXt.so.6: cannot open shared object file: No such file or directory
D [11/Mar/2013:01:05:27 +0100] [Job 38] renderer return value: 127
D [11/Mar/2013:01:05:27 +0100] [Job 38] renderer received signal: 127
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%Trailer
D [11/Mar/2013:01:05:27 +0100] [Job 38] --> Continue DSC parsing now.
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] tail process done writing data to STDOUT
D [11/Mar/2013:01:05:27 +0100] [Job 38] KID4 finished
D [11/Mar/2013:01:05:27 +0100] [Job 38] Found: %%Pages: 1
D [11/Mar/2013:01:05:27 +0100] [Job 38] --> Continue DSC parsing now.
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] 
D [11/Mar/2013:01:05:27 +0100] [Job 38] Closing renderer
D [11/Mar/2013:01:05:27 +0100] [Job 38] KID4 exited with status 0
D [11/Mar/2013:01:05:27 +0100] [Job 38] Process dying with "The renderer command line returned an unrecognized error code 127.", exit stat: 1
D [11/Mar/2013:01:05:27 +0100] [Job 38] error: No such file or directory (2)
D [11/Mar/2013:01:05:27 +0100] [Job 38] KID3 exited with status 1
D [11/Mar/2013:01:05:27 +0100] [Job 38] Renderer exit stat: 1
D [11/Mar/2013:01:05:27 +0100] [Job 38] The renderer command line returned an unrecognized error code 127.
D [11/Mar/2013:01:05:27 +0100] [Job 38] Renderer process finished
D [11/Mar/2013:01:05:27 +0100] [Job 38] Killing process 748 (KID3)
D [11/Mar/2013:01:05:27 +0100] [Job 38] Process dying with "Error closing renderer", exit stat: 1
D [11/Mar/2013:01:05:27 +0100] [Job 38] error: Bad file descriptor (9)
D [11/Mar/2013:01:05:27 +0100] [Job 38] Error closing renderer
E [11/Mar/2013:01:05:27 +0100] PID 743 stopped with status 1!
D [11/Mar/2013:01:05:27 +0100] UpdateJob: job 38, file 0 is complete.
D [11/Mar/2013:01:05:27 +0100] CancelJob: id = 38
D [11/Mar/2013:01:05:27 +0100] StopJob: id = 38, force = 0
D [11/Mar/2013:01:05:27 +0100] StopJob: printer state is 3
D [11/Mar/2013:01:06:25 +0100] CloseClient: 7

Zítra se pokusím zjistit co způsobuje error closing renderer

11.3.2013 08:31 Ondřej Kubečka | skóre: 29 | blog: datlovo | Ulm
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Ha, chybějící interpreter mě nenapadl. Nová chyba by ukazovala na závislost ghostscriptu na X (x11-6.9.0-i486-11.tgz):

gs: error while loading shared libraries: libXt.so.6: cannot open shared object file: No such file or directory

Nicméně je otázka, jestli X11 toolkit je opravdu nezbytný pro samotnou funkci, nebo by šlo a stálo za to překompilovat ghostscript bez této závislosti (ten, co je ve Slacku 14.0 ji nemá), na zpracování písma zřejmě potřebuje, ale měla by snad stačit závislost na libfontconfig, kterou podle seznamy asi ještě budete potřebovat doinstalovat.

http://prirucka.ujc.cas.cz/?ref=785&id=790.

11.3.2013 10:25 Pavel David | skóre: 11
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Zkoušel jsem doinstalovat tu knihovnu, ale bohužel se mi již nevešla na disk, tak že jsem ji odebral. Mám nainstalovanej slackware we virtuálu, tak že by s překompilováním neměl být problém, i když se tomuto sportu snažím vyhnou jak jen to jde, protože nevím, jak pak přenést výsledný produkt na slabší stroj. Zkoušel jsem vytvorit balíček pomocí checkinstall,ale nějak se mi to nepodařilo. Na něčem to krachlo. Jen se bojím, že ten systém na tak maličký disk nenacpu. Dnes to zkusim nainstalovat pěkně popořadě ještě jendnou celé od píky a uvidím.

11.3.2013 10:56 Ondřej Kubečka | skóre: 29 | blog: datlovo | Ulm
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Na kompilaci máte asi lepší použít build skript přímo ze Slacku. Ale když jsem do source/ap/espgs/espgs.build koukal, jak moc snadno se Vám to bude přizpůsobovat, tak jsem zaregistroval, že varianta bez X se už sestavuje. Zkuste misto usr/bin/gs použít usr/bin/gs-no-x11.

http://prirucka.ujc.cas.cz/?ref=785&id=790.

Řešení 1× (Pavel David (tazatel))

11.3.2013 09:12 R
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Mas problemy so zavislostami, najlepsie bude vyhodit cely Slackware a nainstalovat tam Debian.

Dalej kedze procesor je na ghostscript slaby (ze sa pouziva zbytocne, to je druha vec - ale je to "vlastnost" CUPSu) - budes cakat 5 minut na zlozitejsi dokument, bude vhodnejsie tlaciaren nastavit ako RAW a renderovat dokument na strane klienta. A v tom pripade bude lepsie namiesto CUPSu pouzit LPD, usetri sa pamat.

11.3.2013 10:32 Pavel David | skóre: 11
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Dobrý den, nad debianem jsem také uvažoval, používám ho na webovém a emailovém serveru, ale ten slackware slouží zároveň jako SW AccessPoint s XI-6256kou. V případě debianu se mi při updatu stávalo, že díky automatickým závislostem přestal fungovat hostap a nebylo možné konfigurovat wifinu. Navíc díky tomu, že slackware neřeší závislosti, tak mohu systém ořezat co nejvíc to půjde a nemít tam žádné nepotřebné fičurky. Další věc je ta, že vhodně ořezaný slackware startuje na tomto železe mnohem rychleji než debian.

11.3.2013 12:05 R
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Tym, ze Slackware nema oddelene -devel baliky, tak su baliky vacsie. Takze to nemusi byt vyhra. Mam nejake podobne PC (akurat 32 MB RAM a 1 GB disk + nejaky velky ako datovy, ktory sa vypina, 3 sietovky a dve tlaciarne) so Slackware a chcem to prerobit na Debian, lebo sprava a aktualizacie su v Slackware katastrofa... Naposledy sa mi to pri upgrade glibc rozbilo tak, ze som to len tak-tak dal dokopy.

11.3.2013 15:51 Pavel David | skóre: 11
Rozbalit Rozbalit vše Re: Problém s tiskem na HP Deskjet 895CXI na slackware 11 cups

Já jsem zastáncem toho, že když něco funguje, tak proč se v tom hrabat. :-)

Většinou mě k upgradu a nebo inovaci donutilo až to, že jsem potřeboval nějakou novou funkci, která nebyla v původní distribuci obsažená. :-(

Je pravda, že se Debian perfektne spravuje a upgraduje pouze dvěmi příkazy, ale slackware mi přijde o proti debianu podstatně svižnější. Na server bych ale slackware nedal, protože ho ještě tak moc dobře neumím administrovat, jak bych si představoval.

Založit nové vlákno • Nahoru

Tiskni Sdílej: