Byla vydána beta verze Linux Mintu 22.3 s kódovým jménem Zena. Podrobnosti v přehledu novinek a poznámkách k vydání. Vypíchnout lze, že nástroj Systémová hlášení (System Reports) získal mnoho nových funkcí a byl přejmenován na Informace o systému (System Information). Linux Mint 22.3 bude podporován do roku 2029.
GNU Project Debugger aneb GDB byl vydán ve verzi 17.1. Podrobný přehled novinek v souboru NEWS.
Josef Průša oznámil zveřejnění kompletních CAD souborů rámů tiskáren Prusa CORE One a CORE One L. Nejsou vydány pod obecnou veřejnou licenci GNU ani Creative Commons ale pod novou licencí OCL neboli Open Community License. Ta nepovoluje prodávat kompletní tiskárny či remixy založené na těchto zdrojích.
Nový CEO Mozilla Corporation Anthony Enzor-DeMeo tento týden prohlásil, že by se Firefox měl vyvinout v moderní AI prohlížeč. Po bouřlivých diskusích na redditu ujistil, že v nastavení Firefoxu bude existovat volba pro zakázání všech AI funkcí.
V pořadí šestou knihou autora Martina Malého, která vychází v Edici CZ.NIC, správce české národní domény, je titul Kity, bity, neurony. Kniha s podtitulem Moderní technologie pro hobby elektroniku přináší ucelený pohled na svět současných technologií a jejich praktické využití v domácích elektronických projektech. Tento knižní průvodce je ideální pro každého, kdo se chce podívat na současné trendy v oblasti hobby elektroniky, od
… více »Linux Foundation zveřejnila Výroční zprávu za rok 2025 (pdf). Příjmy Linux Foundation byly 311 miliónů dolarů. Výdaje 285 miliónů dolarů. Na podporu linuxového jádra (Linux Kernel Project) šlo 8,4 miliónu dolarů. Linux Foundation podporuje téměř 1 500 open source projektů.
Jean-Baptiste Mardelle se v příspěvku na blogu rozepsal o novinkám v nejnovější verzi 25.12.0 editoru videa Kdenlive (Wikipedie). Ke stažení také na Flathubu.
OpenZFS (Wikipedie), tj. implementace souborového systému ZFS pro Linux a FreeBSD, byl vydán ve verzi 2.4.0.
Kriminalisté z NCTEKK společně s českými i zahraničními kolegy objasnili mimořádně rozsáhlou trestnou činnost z oblasti kybernetické kriminality. V rámci operací OCTOPUS a CONNECT ukončili činnost čtyř call center na Ukrajině. V prvním případě se jednalo o podvodné investice, v případě druhém o podvodné telefonáty, při kterých se zločinci vydávali za policisty a pod legendou napadeného bankovního účtu okrádali své oběti o vysoké finanční částky.
Na lepší pokrytí mobilním signálem a dostupnější mobilní internet se mohou těšit cestující v Pendolinech, railjetech a InterPanterech Českých drah. Konsorcium firem ČD - Telematika a.s. a Kontron Transportation s.r.o. dokončilo instalaci 5G opakovačů mobilního signálu do jednotek Pendolino a InterPanter. Tento krok navazuje na zavedení této technologie v jednotkách Railjet z letošního jara.
4.8.2014 20:56
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
Řešení dotazu:
4.8.2014 23:34
Pavel 'TIGER' Růžička | skóre: 54
5.8.2014 16:09
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
5.8.2014 17:48
Pavel 'TIGER' Růžička | skóre: 54
5.8.2014 19:42
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
openConnection: connect: Adresář nebo soubor neexistuje cannot connect to brltty at :0 Skript pro none spuštěn v run_im. init: Disconnected from notified D-Bus bus/tmp/log/Xorg.0.log
[ 21.377] X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 21.377] X Protocol Version 11, Revision 0 [ 21.377] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 21.377] Current Operating System: Linux pavel-nb 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 [ 21.377] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=56f526bc-baab-426e-be48-cd5748e51a04 ro [ 21.377] Build Date: 16 April 2014 01:36:29PM [ 21.377] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 21.377] Current version of pixman: 0.30.2 [ 21.377] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.377] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.377] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 4 08:38:23 2014 [ 21.437] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.465] (==) No Layout section. Using the first Screen section. [ 21.465] (==) No screen section available. Using defaults. [ 21.465] (**) |-->Screen "Default Screen Section" (0) [ 21.465] (**) | |-->Monitor "< default monitor>" [ 21.466] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 21.466] (==) Automatically adding devices [ 21.466] (==) Automatically enabling devices [ 21.466] (==) Automatically adding GPU devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.466] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 21.466] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.466] (II) Loader magic: 0x7ff23e1cbd60 [ 21.466] (II) Module ABI versions: [ 21.466] X.Org ANSI C Emulation: 0.4 [ 21.466] X.Org Video Driver: 15.0 [ 21.466] X.Org XInput driver : 20.0 [ 21.466] X.Org Server Extension : 8.0 [ 21.471] (--) PCI:*(0:1:0:0) 10de:0649:1025:0142 rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128 [ 21.471] Initializing built-in extension Generic Event Extension [ 21.471] Initializing built-in extension SHAPE [ 21.471] Initializing built-in extension MIT-SHM [ 21.471] Initializing built-in extension XInputExtension [ 21.471] Initializing built-in extension XTEST [ 21.471] Initializing built-in extension BIG-REQUESTS [ 21.471] Initializing built-in extension SYNC [ 21.471] Initializing built-in extension XKEYBOARD [ 21.471] Initializing built-in extension XC-MISC [ 21.471] Initializing built-in extension SECURITY [ 21.471] Initializing built-in extension XINERAMA [ 21.471] Initializing built-in extension XFIXES [ 21.471] Initializing built-in extension RENDER [ 21.471] Initializing built-in extension RANDR [ 21.471] Initializing built-in extension COMPOSITE [ 21.471] Initializing built-in extension DAMAGE [ 21.471] Initializing built-in extension MIT-SCREEN-SAVER [ 21.471] Initializing built-in extension DOUBLE-BUFFER [ 21.471] Initializing built-in extension RECORD [ 21.471] Initializing built-in extension DPMS [ 21.471] Initializing built-in extension Present [ 21.471] Initializing built-in extension DRI3 [ 21.471] Initializing built-in extension X-Resource [ 21.471] Initializing built-in extension XVideo [ 21.471] Initializing built-in extension XVideo-MotionCompensation [ 21.471] Initializing built-in extension SELinux [ 21.471] Initializing built-in extension XFree86-VidModeExtension [ 21.471] Initializing built-in extension XFree86-DGA [ 21.471] Initializing built-in extension XFree86-DRI [ 21.471] Initializing built-in extension DRI2 [ 21.471] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere. [ 21.471] (II) "glx" will be loaded by default. [ 21.471] (WW) "xmir" is not to be loaded by default. Skipping. [ 21.471] (II) LoadModule: "glx" [ 21.471] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 21.769] (II) Module glx: vendor="NVIDIA Corporation" [ 21.769] compiled for 4.0.2, module version = 1.0.0 [ 21.769] Module class: X.Org Server Extension [ 21.769] (II) NVIDIA GLX Module 304.117 Tue Nov 26 21:45:09 PST 2013 [ 21.769] Loading extension GLX [ 21.769] (==) Matched nvidia as autoconfigured driver 0 [ 21.769] (==) Matched nouveau as autoconfigured driver 1 [ 21.769] (==) Matched modesetting as autoconfigured driver 2 [ 21.769] (==) Matched fbdev as autoconfigured driver 3 [ 21.769] (==) Matched vesa as autoconfigured driver 4 [ 21.769] (==) Assigned the driver to the xf86ConfigLayout [ 21.769] (II) LoadModule: "nvidia" [ 21.769] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 21.770] (II) Module nvidia: vendor="NVIDIA Corporation" [ 21.770] compiled for 4.0.2, module version = 1.0.0 [ 21.770] Module class: X.Org Video Driver [ 21.770] (II) LoadModule: "nouveau" [ 21.788] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 21.795] (II) Module nouveau: vendor="X.Org Foundation" [ 21.795] compiled for 1.15.0, module version = 1.0.10 [ 21.795] Module class: X.Org Video Driver [ 21.795] ABI class: X.Org Video Driver, version 15.0 [ 21.795] (II) LoadModule: "modesetting" [ 21.795] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 21.795] (II) Module modesetting: vendor="X.Org Foundation" [ 21.795] compiled for 1.15.0, module version = 0.8.1 [ 21.795] Module class: X.Org Video Driver [ 21.795] ABI class: X.Org Video Driver, version 15.0 [ 21.795] (II) LoadModule: "fbdev" [ 21.803] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 21.804] (II) Module fbdev: vendor="X.Org Foundation" [ 21.804] compiled for 1.15.0, module version = 0.4.4 [ 21.804] Module class: X.Org Video Driver [ 21.804] ABI class: X.Org Video Driver, version 15.0 [ 21.804] (II) LoadModule: "vesa" [ 21.807] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 21.807] (II) Module vesa: vendor="X.Org Foundation" [ 21.807] compiled for 1.15.0, module version = 2.3.3 [ 21.807] Module class: X.Org Video Driver [ 21.807] ABI class: X.Org Video Driver, version 15.0 [ 21.807] (II) NVIDIA dlloader X Driver 304.117 Tue Nov 26 21:27:08 PST 2013 [ 21.807] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 21.807] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000 [ 21.807] (II) NOUVEAU driver for NVIDIA chipset families : [ 21.807] RIVA TNT (NV04) [ 21.808] RIVA TNT2 (NV05) [ 21.808] GeForce 256 (NV10) [ 21.808] GeForce 2 (NV11, NV15) [ 21.808] GeForce 4MX (NV17, NV18) [ 21.808] GeForce 3 (NV20) [ 21.808] GeForce 4Ti (NV25, NV28) [ 21.808] GeForce FX (NV3x) [ 21.808] GeForce 6 (NV4x) [ 21.808] GeForce 7 (G7x) [ 21.808] GeForce 8 (G8x) [ 21.808] GeForce GTX 200 (NVA0) [ 21.808] GeForce GTX 400 (NVC0) [ 21.808] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 21.808] (II) FBDEV: driver for framebuffer: fbdev [ 21.808] (II) VESA: driver for VESA chipsets: vesa [ 21.808] (++) using VT number 7 [ 21.812] (II) Loading sub module "fb" [ 21.812] (II) LoadModule: "fb" [ 21.813] (II) Loading /usr/lib/xorg/modules/libfb.so [ 21.813] (II) Module fb: vendor="X.Org Foundation" [ 21.813] compiled for 1.15.1, module version = 1.0.0 [ 21.813] ABI class: X.Org ANSI C Emulation, version 0.4 [ 21.813] (II) Loading sub module "wfb" [ 21.813] (II) LoadModule: "wfb" [ 21.828] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 21.829] (II) Module wfb: vendor="X.Org Foundation" [ 21.829] compiled for 1.15.1, module version = 1.0.0 [ 21.829] ABI class: X.Org ANSI C Emulation, version 0.4 [ 21.829] (II) Loading sub module "ramdac" [ 21.829] (II) LoadModule: "ramdac" [ 21.829] (II) Module "ramdac" already built-in [ 21.829] (WW) Falling back to old probe method for modesetting [ 21.829] (EE) open /dev/dri/card0: No such file or directory [ 21.829] (WW) Falling back to old probe method for fbdev [ 21.829] (II) Loading sub module "fbdevhw" [ 21.829] (II) LoadModule: "fbdevhw" [ 21.829] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 21.829] (II) Module fbdevhw: vendor="X.Org Foundation" [ 21.829] compiled for 1.15.1, module version = 0.0.2 [ 21.829] ABI class: X.Org Video Driver, version 15.0 [ 21.829] (EE) open /dev/fb0: No such file or directory [ 21.829] (WW) Falling back to old probe method for vesa [ 21.829] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 21.829] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 21.829] (==) NVIDIA(0): RGB weight 888 [ 21.829] (==) NVIDIA(0): Default visual is TrueColor [ 21.829] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 21.829] (**) NVIDIA(0): Enabling 2D acceleration [ 24.670] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 24.670] (II) NVIDIA(GPU-0): Vision stereo. [ 24.674] (II) NVIDIA(0): NVIDIA GPU GeForce 9600M GT (G96) at PCI:1:0:0 (GPU-0) [ 24.674] (--) NVIDIA(0): Memory: 524288 kBytes [ 24.674] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.04 [ 24.674] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 24.674] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 24.678] (--) NVIDIA(0): Valid display device(s) on GeForce 9600M GT at PCI:1:0:0 [ 24.678] (--) NVIDIA(0): CRT-0 [ 24.678] (--) NVIDIA(0): Seiko/Epson (DFP-0) (connected) [ 24.678] (--) NVIDIA(0): DFP-1 [ 24.678] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 24.678] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock [ 24.678] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS [ 24.678] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 24.678] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 24.678] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 24.678] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 24.678] (**) NVIDIA(0): been enabled on all display devices.) [ 24.679] (==) NVIDIA(0): [ 24.679] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 24.679] (==) NVIDIA(0): will be used as the requested mode. [ 24.679] (==) NVIDIA(0): [ 24.679] (II) NVIDIA(0): Validated MetaModes: [ 24.679] (II) NVIDIA(0): "DFP-0:nvidia-auto-select" [ 24.679] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900 [ 25.743] (--) NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config [ 25.743] (--) NVIDIA(0): option [ 25.743] (II) UnloadModule: "nouveau" [ 25.743] (II) Unloading nouveau [ 25.744] (II) UnloadModule: "modesetting" [ 25.744] (II) Unloading modesetting [ 25.744] (II) UnloadModule: "fbdev" [ 25.744] (II) Unloading fbdev [ 25.744] (II) UnloadSubModule: "fbdevhw" [ 25.744] (II) Unloading fbdevhw [ 25.744] (II) UnloadModule: "vesa" [ 25.744] (II) Unloading vesa [ 25.744] (--) Depth 24 pixmap format is 32 bpp [ 25.744] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access. [ 25.757] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 26.049] Loading extension NV-GLX [ 26.075] (==) NVIDIA(0): Disabling shared memory pixmaps [ 26.075] (==) NVIDIA(0): Backing store enabled [ 26.075] (==) NVIDIA(0): Silken mouse enabled [ 26.075] (==) NVIDIA(0): DPMS enabled [ 26.075] Loading extension NV-CONTROL [ 26.075] Loading extension XINERAMA [ 26.075] (II) Loading sub module "dri2" [ 26.075] (II) LoadModule: "dri2" [ 26.075] (II) Module "dri2" already built-in [ 26.075] (II) NVIDIA(0): [DRI2] Setup complete [ 26.075] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 26.076] (--) RandR disabled [ 26.080] (II) SELinux: Disabled on system [ 26.081] (II) Initializing extension GLX [ 26.095] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 26.098] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 26.098] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 26.098] (II) LoadModule: "evdev" [ 26.098] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 26.115] (II) Module evdev: vendor="X.Org Foundation" [ 26.115] compiled for 1.15.0, module version = 2.8.2 [ 26.115] Module class: X.Org XInput Driver [ 26.115] ABI class: X.Org XInput driver, version 20.0 [ 26.115] (II) Using input driver 'evdev' for 'Power Button' [ 26.115] (**) Power Button: always reports core events [ 26.115] (**) evdev: Power Button: Device: "/dev/input/event3" [ 26.116] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 26.116] (--) evdev: Power Button: Found keys [ 26.116] (II) evdev: Power Button: Configuring as keyboard [ 26.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 26.116] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 26.116] (**) Option "xkb_rules" "evdev" [ 26.116] (**) Option "xkb_model" "pc105" [ 26.116] (**) Option "xkb_layout" "cz" [ 26.117] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm [ 26.118] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 26.118] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 26.118] (II) Using input driver 'evdev' for 'Video Bus' [ 26.118] (**) Video Bus: always reports core events [ 26.118] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 26.118] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 26.118] (--) evdev: Video Bus: Found keys [ 26.118] (II) evdev: Video Bus: Configuring as keyboard [ 26.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14/event7" [ 26.118] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 26.118] (**) Option "xkb_rules" "evdev" [ 26.118] (**) Option "xkb_model" "pc105" [ 26.118] (**) Option "xkb_layout" "cz" [ 26.118] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 26.118] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 26.118] (II) Using input driver 'evdev' for 'Power Button' [ 26.119] (**) Power Button: always reports core events [ 26.119] (**) evdev: Power Button: Device: "/dev/input/event1" [ 26.119] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 26.119] (--) evdev: Power Button: Found keys [ 26.119] (II) evdev: Power Button: Configuring as keyboard [ 26.119] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 26.119] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 26.119] (**) Option "xkb_rules" "evdev" [ 26.119] (**) Option "xkb_model" "pc105" [ 26.119] (**) Option "xkb_layout" "cz" [ 26.119] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 26.119] (II) No input driver specified, ignoring this device. [ 26.119] (II) This device may have been added with another device file. [ 26.119] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 26.119] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 26.119] (II) Using input driver 'evdev' for 'Sleep Button' [ 26.119] (**) Sleep Button: always reports core events [ 26.119] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 26.119] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 26.119] (--) evdev: Sleep Button: Found keys [ 26.119] (II) evdev: Sleep Button: Configuring as keyboard [ 26.119] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2" [ 26.119] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 26.119] (**) Option "xkb_rules" "evdev" [ 26.120] (**) Option "xkb_model" "pc105" [ 26.120] (**) Option "xkb_layout" "cz" [ 26.120] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event13) [ 26.120] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall" [ 26.120] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam' [ 26.120] (**) Acer Crystal Eye webcam: always reports core events [ 26.120] (**) evdev: Acer Crystal Eye webcam: Device: "/dev/input/event13" [ 26.120] (--) evdev: Acer Crystal Eye webcam: Vendor 0x64e Product 0xa103 [ 26.120] (--) evdev: Acer Crystal Eye webcam: Found keys [ 26.120] (II) evdev: Acer Crystal Eye webcam: Configuring as keyboard [ 26.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input20/event13" [ 26.120] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD, id 10) [ 26.120] (**) Option "xkb_rules" "evdev" [ 26.120] (**) Option "xkb_model" "pc105" [ 26.120] (**) Option "xkb_layout" "cz" [ 26.121] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11) [ 26.121] (II) No input driver specified, ignoring this device. [ 26.121] (II) This device may have been added with another device file. [ 26.121] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event10) [ 26.121] (II) No input driver specified, ignoring this device. [ 26.121] (II) This device may have been added with another device file. [ 26.121] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9) [ 26.121] (II) No input driver specified, ignoring this device. [ 26.121] (II) This device may have been added with another device file. [ 26.121] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 Phantom (/dev/input/event8) [ 26.121] (II) No input driver specified, ignoring this device. [ 26.121] (II) This device may have been added with another device file. [ 26.122] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 26.122] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 26.122] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 26.122] (**) USB Optical Mouse: always reports core events [ 26.122] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 26.122] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 26.122] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 26.122] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 26.122] (--) evdev: USB Optical Mouse: Found relative axes [ 26.122] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 26.122] (II) evdev: USB Optical Mouse: Configuring as mouse [ 26.122] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 26.122] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 26.122] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 26.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input13/event6" [ 26.122] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 26.122] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 26.122] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 26.122] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 26.122] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 26.122] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 26.122] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 26.122] (II) No input driver specified, ignoring this device. [ 26.122] (II) This device may have been added with another device file. [ 26.123] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 26.123] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 26.123] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 26.123] (**) AT Translated Set 2 keyboard: always reports core events [ 26.123] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 26.123] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 26.123] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 26.123] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 26.123] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 26.123] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 26.123] (**) Option "xkb_rules" "evdev" [ 26.123] (**) Option "xkb_model" "pc105" [ 26.123] (**) Option "xkb_layout" "cz" [ 26.123] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) [ 26.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 26.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 26.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 26.123] (II) LoadModule: "synaptics" [ 26.124] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 26.124] (II) Module synaptics: vendor="X.Org Foundation" [ 26.124] compiled for 1.15.0, module version = 1.7.4 [ 26.124] Module class: X.Org XInput Driver [ 26.124] ABI class: X.Org XInput driver, version 20.0 [ 26.124] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 26.124] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 26.124] (**) Option "Device" "/dev/input/event5" [ 26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 59) [ 26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 109) [ 26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons [ 26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 26.144] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 26.160] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event5" [ 26.160] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13) [ 26.160] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 26.160] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 26.160] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040 [ 26.160] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 26.160] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 26.160] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 26.160] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 26.160] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 26.160] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 26.160] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 26.162] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event12) [ 26.162] (II) No input driver specified, ignoring this device. [ 26.162] (II) This device may have been added with another device file. [ 26.162] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0) [ 26.162] (II) No input driver specified, ignoring this device. [ 26.162] (II) This device may have been added with another device file. [ 38.214] (II) XKB: reuse xkmfile /var/lib/xkb/server-15659461D8B9AC515B1091E099D8EE9DC1634218.xkm [ 45.350] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 45.350] (II) NVIDIA(GPU-0): Vision stereo. [ 45.350] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 45.350] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 45.350] (**) NVIDIA(0): been enabled on all display devices.) [ 7011.675] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 7013.040] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 11769.049] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 11770.428] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 14536.256] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 14537.617] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 18857.097] (II) config/udev: removing device USB Optical Mouse [ 18857.099] (II) evdev: USB Optical Mouse: Close [ 18857.099] (II) UnloadModule: "evdev" [ 18863.207] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 18863.207] (II) No input driver specified, ignoring this device. [ 18863.207] (II) This device may have been added with another device file. [ 18863.209] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 18863.209] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 18863.209] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 18863.209] (**) USB Optical Mouse: always reports core events [ 18863.209] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 18863.209] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 18863.209] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 18863.209] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 18863.209] (--) evdev: USB Optical Mouse: Found relative axes [ 18863.209] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 18863.210] (II) evdev: USB Optical Mouse: Configuring as mouse [ 18863.210] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 18863.210] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 18863.210] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 18863.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input21/event6" [ 18863.210] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 18863.210] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 18863.210] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 18863.210] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 18863.210] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 18863.210] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 19139.409] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 19140.774] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 21272.061] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 21272.061] (II) NVIDIA(GPU-0): Vision stereo. [ 21272.061] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 21272.061] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 21272.061] (**) NVIDIA(0): been enabled on all display devices.) [ 21272.086] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 21272.086] (II) NVIDIA(GPU-0): Vision stereo. [ 21272.086] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 21272.086] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 21272.086] (**) NVIDIA(0): been enabled on all display devices.) [ 21272.091] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 21272.091] (II) NVIDIA(GPU-0): Vision stereo. [ 21272.091] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 21272.091] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 21272.091] (**) NVIDIA(0): been enabled on all display devices.) [ 22928.661] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 22928.661] (II) NVIDIA(GPU-0): Vision stereo. [ 22928.661] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 22928.661] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 22928.661] (**) NVIDIA(0): been enabled on all display devices.) [ 26873.333] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 26874.711] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 27077.796] (II) config/udev: removing device USB Optical Mouse [ 27077.816] (II) evdev: USB Optical Mouse: Close [ 27077.817] (II) UnloadModule: "evdev" [ 27083.430] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 27083.430] (II) No input driver specified, ignoring this device. [ 27083.430] (II) This device may have been added with another device file. [ 27083.431] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 27083.431] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 27083.431] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 27083.431] (**) USB Optical Mouse: always reports core events [ 27083.431] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 27083.431] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 27083.431] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 27083.431] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 27083.431] (--) evdev: USB Optical Mouse: Found relative axes [ 27083.431] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 27083.431] (II) evdev: USB Optical Mouse: Configuring as mouse [ 27083.431] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 27083.431] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 27083.431] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 27083.431] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input22/event6" [ 27083.431] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 27083.431] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 27083.431] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 27083.431] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 27083.431] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 27083.431] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 28848.520] (II) config/udev: removing device USB Optical Mouse [ 28848.537] (II) evdev: USB Optical Mouse: Close [ 28848.537] (II) UnloadModule: "evdev" [ 28854.152] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 28854.152] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 28854.152] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 28854.152] (**) USB Optical Mouse: always reports core events [ 28854.152] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 28854.152] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 28854.152] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 28854.153] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 28854.153] (--) evdev: USB Optical Mouse: Found relative axes [ 28854.153] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 28854.153] (II) evdev: USB Optical Mouse: Configuring as mouse [ 28854.153] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 28854.153] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 28854.153] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 28854.153] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input23/event6" [ 28854.153] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 28854.153] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 28854.153] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 28854.153] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 28854.153] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 28854.153] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 28854.153] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 28854.153] (II) No input driver specified, ignoring this device. [ 28854.153] (II) This device may have been added with another device file. [ 29134.957] (II) config/udev: removing device USB Optical Mouse [ 29134.976] (II) evdev: USB Optical Mouse: Close [ 29134.976] (II) UnloadModule: "evdev" [ 29140.817] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29140.817] (II) No input driver specified, ignoring this device. [ 29140.817] (II) This device may have been added with another device file. [ 29140.818] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29140.819] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29140.819] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29140.819] (**) USB Optical Mouse: always reports core events [ 29140.819] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29140.819] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29140.819] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29140.819] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29140.819] (--) evdev: USB Optical Mouse: Found relative axes [ 29140.819] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29140.819] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29140.819] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29140.819] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29140.819] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29140.819] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input24/event6" [ 29140.819] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29140.819] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29140.819] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29140.819] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29140.819] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29140.819] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29179.592] (II) config/udev: removing device USB Optical Mouse [ 29179.612] (II) evdev: USB Optical Mouse: Close [ 29179.612] (II) UnloadModule: "evdev" [ 29185.508] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29185.508] (II) No input driver specified, ignoring this device. [ 29185.508] (II) This device may have been added with another device file. [ 29185.510] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29185.510] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29185.510] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29185.510] (**) USB Optical Mouse: always reports core events [ 29185.510] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29185.510] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29185.510] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29185.510] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29185.510] (--) evdev: USB Optical Mouse: Found relative axes [ 29185.510] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29185.510] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29185.510] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29185.510] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29185.510] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29185.510] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input25/event6" [ 29185.510] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29185.510] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29185.510] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29185.510] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29185.510] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29185.510] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29192.002] (II) config/udev: removing device USB Optical Mouse [ 29192.018] (II) evdev: USB Optical Mouse: Close [ 29192.018] (II) UnloadModule: "evdev" [ 29197.770] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29197.770] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29197.770] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29197.770] (**) USB Optical Mouse: always reports core events [ 29197.770] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29197.776] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29197.776] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29197.776] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29197.776] (--) evdev: USB Optical Mouse: Found relative axes [ 29197.776] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29197.776] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29197.776] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29197.776] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29197.776] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29197.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input26/event6" [ 29197.776] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29197.776] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29197.776] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29197.776] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29197.776] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29197.776] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29197.777] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29197.777] (II) No input driver specified, ignoring this device. [ 29197.777] (II) This device may have been added with another device file. [ 29205.136] (II) config/udev: removing device USB Optical Mouse [ 29205.156] (II) evdev: USB Optical Mouse: Close [ 29205.156] (II) UnloadModule: "evdev" [ 29210.686] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29210.686] (II) No input driver specified, ignoring this device. [ 29210.686] (II) This device may have been added with another device file. [ 29210.688] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29210.688] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29210.688] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29210.688] (**) USB Optical Mouse: always reports core events [ 29210.688] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29210.692] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29210.692] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29210.692] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29210.692] (--) evdev: USB Optical Mouse: Found relative axes [ 29210.692] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29210.692] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29210.692] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29210.692] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29210.692] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29210.692] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input27/event6" [ 29210.692] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29210.692] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29210.692] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29210.692] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29210.692] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29210.692] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29212.089] (II) config/udev: removing device USB Optical Mouse [ 29212.104] (II) evdev: USB Optical Mouse: Close [ 29212.104] (II) UnloadModule: "evdev" [ 29217.866] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29217.866] (II) No input driver specified, ignoring this device. [ 29217.866] (II) This device may have been added with another device file. [ 29217.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29217.868] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29217.868] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29217.868] (**) USB Optical Mouse: always reports core events [ 29217.868] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29217.868] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29217.868] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29217.868] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29217.869] (--) evdev: USB Optical Mouse: Found relative axes [ 29217.869] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29217.869] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29217.869] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29217.869] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29217.869] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29217.869] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input28/event6" [ 29217.869] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29217.869] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29217.869] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29217.869] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29217.869] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29217.869] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29225.730] (II) config/udev: removing device USB Optical Mouse [ 29225.748] (II) evdev: USB Optical Mouse: Close [ 29225.748] (II) UnloadModule: "evdev" [ 29231.652] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29231.652] (II) No input driver specified, ignoring this device. [ 29231.652] (II) This device may have been added with another device file. [ 29231.653] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29231.653] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29231.653] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29231.653] (**) USB Optical Mouse: always reports core events [ 29231.653] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29231.653] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29231.653] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29231.653] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29231.653] (--) evdev: USB Optical Mouse: Found relative axes [ 29231.653] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29231.653] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29231.653] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29231.653] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29231.653] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29231.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input29/event6" [ 29231.653] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29231.653] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29231.653] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29231.653] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29231.653] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29231.653] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29233.665] (II) config/udev: removing device USB Optical Mouse [ 29233.677] (II) evdev: USB Optical Mouse: Close [ 29233.677] (II) UnloadModule: "evdev" [ 29239.539] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29239.539] (II) No input driver specified, ignoring this device. [ 29239.539] (II) This device may have been added with another device file. [ 29239.542] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29239.542] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29239.542] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29239.542] (**) USB Optical Mouse: always reports core events [ 29239.542] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29239.542] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29239.542] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29239.542] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29239.542] (--) evdev: USB Optical Mouse: Found relative axes [ 29239.542] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29239.542] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29239.542] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29239.542] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29239.542] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29239.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input30/event6" [ 29239.542] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29239.542] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29239.542] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29239.542] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29239.542] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29239.542] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29240.108] (II) config/udev: removing device USB Optical Mouse [ 29240.116] (II) evdev: USB Optical Mouse: Close [ 29240.116] (II) UnloadModule: "evdev" [ 29245.926] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29245.926] (II) No input driver specified, ignoring this device. [ 29245.926] (II) This device may have been added with another device file. [ 29245.930] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29245.930] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29245.930] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29245.930] (**) USB Optical Mouse: always reports core events [ 29245.930] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29245.930] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29245.930] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29245.930] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29245.930] (--) evdev: USB Optical Mouse: Found relative axes [ 29245.930] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29245.930] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29245.930] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29245.930] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29245.930] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29245.930] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input31/event6" [ 29245.930] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29245.930] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29245.930] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29245.930] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29245.930] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29245.930] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29254.744] (II) config/udev: removing device USB Optical Mouse [ 29254.765] (II) evdev: USB Optical Mouse: Close [ 29254.765] (II) UnloadModule: "evdev" [ 29260.698] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29260.698] (II) No input driver specified, ignoring this device. [ 29260.698] (II) This device may have been added with another device file. [ 29260.702] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29260.702] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29260.702] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29260.702] (**) USB Optical Mouse: always reports core events [ 29260.702] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29260.704] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29260.704] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29260.704] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29260.704] (--) evdev: USB Optical Mouse: Found relative axes [ 29260.704] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29260.704] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29260.704] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29260.704] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29260.704] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29260.704] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input32/event6" [ 29260.704] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29260.704] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29260.704] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29260.704] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29260.704] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29260.704] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29270.860] (II) config/udev: removing device USB Optical Mouse [ 29270.877] (II) evdev: USB Optical Mouse: Close [ 29270.877] (II) UnloadModule: "evdev" [ 29276.783] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29276.783] (II) No input driver specified, ignoring this device. [ 29276.783] (II) This device may have been added with another device file. [ 29276.785] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29276.785] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29276.785] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29276.785] (**) USB Optical Mouse: always reports core events [ 29276.785] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29276.785] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29276.785] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29276.785] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29276.785] (--) evdev: USB Optical Mouse: Found relative axes [ 29276.785] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29276.785] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29276.785] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29276.786] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29276.786] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29276.786] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input33/event6" [ 29276.786] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29276.786] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29276.786] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29276.786] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29276.786] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29276.786] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29280.036] (II) config/udev: removing device USB Optical Mouse [ 29280.049] (II) evdev: USB Optical Mouse: Close [ 29280.049] (II) UnloadModule: "evdev" [ 29285.884] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29285.884] (II) No input driver specified, ignoring this device. [ 29285.884] (II) This device may have been added with another device file. [ 29285.884] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29285.884] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29285.884] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29285.884] (**) USB Optical Mouse: always reports core events [ 29285.884] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29285.896] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29285.896] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29285.896] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29285.896] (--) evdev: USB Optical Mouse: Found relative axes [ 29285.896] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29285.896] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29285.896] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29285.896] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29285.896] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29285.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input34/event6" [ 29285.896] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29285.896] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29285.896] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29285.896] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29285.896] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29285.896] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29295.417] (II) config/udev: removing device USB Optical Mouse [ 29295.429] (II) evdev: USB Optical Mouse: Close [ 29295.429] (II) UnloadModule: "evdev" [ 29300.940] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29300.940] (II) No input driver specified, ignoring this device. [ 29300.940] (II) This device may have been added with another device file. [ 29300.944] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29300.944] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29300.944] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29300.944] (**) USB Optical Mouse: always reports core events [ 29300.944] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29300.944] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29300.944] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29300.944] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29300.944] (--) evdev: USB Optical Mouse: Found relative axes [ 29300.944] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29300.944] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29300.944] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29300.944] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29300.944] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29300.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input35/event6" [ 29300.944] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29300.944] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29300.944] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29300.944] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29300.944] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29300.944] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29301.364] (II) config/udev: removing device USB Optical Mouse [ 29301.385] (II) evdev: USB Optical Mouse: Close [ 29301.385] (II) UnloadModule: "evdev" [ 29307.381] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29307.381] (II) No input driver specified, ignoring this device. [ 29307.381] (II) This device may have been added with another device file. [ 29307.385] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29307.385] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29307.385] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29307.385] (**) USB Optical Mouse: always reports core events [ 29307.385] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29307.385] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29307.385] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29307.385] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29307.385] (--) evdev: USB Optical Mouse: Found relative axes [ 29307.385] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29307.385] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29307.385] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29307.385] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29307.385] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29307.385] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input36/event6" [ 29307.385] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29307.385] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29307.385] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29307.385] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29307.385] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29307.385] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29330.381] (II) config/udev: removing device USB Optical Mouse [ 29330.392] (II) evdev: USB Optical Mouse: Close [ 29330.392] (II) UnloadModule: "evdev" [ 29336.013] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29336.013] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29336.013] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29336.013] (**) USB Optical Mouse: always reports core events [ 29336.013] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29336.020] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29336.020] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29336.020] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29336.020] (--) evdev: USB Optical Mouse: Found relative axes [ 29336.020] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29336.020] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29336.020] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29336.020] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29336.020] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29336.020] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input37/event6" [ 29336.020] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29336.020] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29336.020] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29336.020] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29336.020] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29336.020] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29336.021] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29336.021] (II) No input driver specified, ignoring this device. [ 29336.021] (II) This device may have been added with another device file. [ 29348.737] (II) config/udev: removing device USB Optical Mouse [ 29348.753] (II) evdev: USB Optical Mouse: Close [ 29348.753] (II) UnloadModule: "evdev" [ 29354.247] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29354.247] (II) No input driver specified, ignoring this device. [ 29354.247] (II) This device may have been added with another device file. [ 29354.247] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29354.247] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29354.247] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29354.247] (**) USB Optical Mouse: always reports core events [ 29354.247] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29354.247] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29354.247] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29354.247] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29354.247] (--) evdev: USB Optical Mouse: Found relative axes [ 29354.247] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29354.247] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29354.247] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29354.247] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29354.247] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29354.247] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input38/event6" [ 29354.247] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29354.248] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29354.248] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29354.248] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29354.248] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29354.248] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29361.877] (II) config/udev: removing device USB Optical Mouse [ 29361.896] (II) evdev: USB Optical Mouse: Close [ 29361.896] (II) UnloadModule: "evdev" [ 29367.609] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29367.609] (II) No input driver specified, ignoring this device. [ 29367.609] (II) This device may have been added with another device file. [ 29367.612] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29367.612] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29367.612] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29367.612] (**) USB Optical Mouse: always reports core events [ 29367.612] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29367.612] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29367.612] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29367.612] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29367.612] (--) evdev: USB Optical Mouse: Found relative axes [ 29367.612] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29367.612] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29367.612] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29367.612] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29367.612] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29367.612] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input39/event6" [ 29367.612] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29367.613] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29367.613] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29367.613] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29367.613] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29367.613] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29383.701] (II) config/udev: removing device USB Optical Mouse [ 29383.713] (II) evdev: USB Optical Mouse: Close [ 29383.714] (II) UnloadModule: "evdev" [ 29389.367] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29389.367] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29389.367] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29389.367] (**) USB Optical Mouse: always reports core events [ 29389.367] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29389.380] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29389.380] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29389.380] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29389.380] (--) evdev: USB Optical Mouse: Found relative axes [ 29389.380] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29389.380] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29389.380] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29389.380] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29389.380] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29389.380] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input40/event6" [ 29389.380] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29389.380] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29389.380] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29389.380] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29389.380] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29389.380] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29389.381] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29389.381] (II) No input driver specified, ignoring this device. [ 29389.381] (II) This device may have been added with another device file. [ 29395.105] (II) config/udev: removing device USB Optical Mouse [ 29395.112] (II) evdev: USB Optical Mouse: Close [ 29395.112] (II) UnloadModule: "evdev" [ 29400.766] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29400.766] (II) No input driver specified, ignoring this device. [ 29400.766] (II) This device may have been added with another device file. [ 29400.769] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29400.769] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29400.769] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29400.769] (**) USB Optical Mouse: always reports core events [ 29400.769] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29400.769] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29400.769] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29400.769] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29400.769] (--) evdev: USB Optical Mouse: Found relative axes [ 29400.769] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29400.769] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29400.769] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29400.769] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29400.769] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29400.769] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input41/event6" [ 29400.769] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29400.769] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29400.769] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29400.769] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29400.769] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29400.769] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29404.530] (II) config/udev: removing device USB Optical Mouse [ 29404.544] (II) evdev: USB Optical Mouse: Close [ 29404.544] (II) UnloadModule: "evdev" [ 29410.017] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29410.017] (II) No input driver specified, ignoring this device. [ 29410.017] (II) This device may have been added with another device file. [ 29410.020] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29410.020] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29410.020] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29410.020] (**) USB Optical Mouse: always reports core events [ 29410.020] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29410.020] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29410.020] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29410.020] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29410.020] (--) evdev: USB Optical Mouse: Found relative axes [ 29410.020] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29410.020] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29410.020] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29410.020] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29410.020] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29410.020] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input42/event6" [ 29410.020] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29410.021] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29410.021] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29410.021] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29410.021] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29410.021] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29420.152] (II) config/udev: removing device USB Optical Mouse [ 29420.156] (II) evdev: USB Optical Mouse: Close [ 29420.156] (II) UnloadModule: "evdev" [ 29425.833] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29425.833] (II) No input driver specified, ignoring this device. [ 29425.833] (II) This device may have been added with another device file. [ 29425.844] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29425.844] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29425.844] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29425.844] (**) USB Optical Mouse: always reports core events [ 29425.844] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29425.844] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29425.844] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29425.844] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29425.844] (--) evdev: USB Optical Mouse: Found relative axes [ 29425.844] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29425.844] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29425.844] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29425.844] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29425.844] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29425.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input43/event6" [ 29425.844] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29425.844] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29425.844] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29425.844] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29425.844] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29425.844] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29428.096] (II) config/udev: removing device USB Optical Mouse [ 29428.112] (II) evdev: USB Optical Mouse: Close [ 29428.112] (II) UnloadModule: "evdev" [ 29433.803] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29433.803] (II) No input driver specified, ignoring this device. [ 29433.803] (II) This device may have been added with another device file. [ 29433.812] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29433.812] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29433.812] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29433.812] (**) USB Optical Mouse: always reports core events [ 29433.812] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29433.812] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29433.812] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29433.812] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29433.812] (--) evdev: USB Optical Mouse: Found relative axes [ 29433.812] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29433.812] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29433.812] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29433.812] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29433.812] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29433.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input44/event6" [ 29433.812] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29433.813] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29433.813] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29433.813] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29433.813] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29433.813] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29434.536] (II) config/udev: removing device USB Optical Mouse [ 29434.551] (II) evdev: USB Optical Mouse: Close [ 29434.551] (II) UnloadModule: "evdev" [ 29440.510] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29440.510] (II) No input driver specified, ignoring this device. [ 29440.510] (II) This device may have been added with another device file. [ 29440.513] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29440.513] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29440.513] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29440.513] (**) USB Optical Mouse: always reports core events [ 29440.513] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29440.513] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29440.513] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29440.513] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29440.513] (--) evdev: USB Optical Mouse: Found relative axes [ 29440.513] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29440.513] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29440.513] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29440.513] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29440.513] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29440.513] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input45/event6" [ 29440.513] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29440.513] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29440.513] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29440.513] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29440.513] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29440.513] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29448.177] (II) config/udev: removing device USB Optical Mouse [ 29448.189] (II) evdev: USB Optical Mouse: Close [ 29448.189] (II) UnloadModule: "evdev" [ 29453.811] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29453.811] (II) No input driver specified, ignoring this device. [ 29453.811] (II) This device may have been added with another device file. [ 29453.814] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29453.814] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29453.814] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29453.814] (**) USB Optical Mouse: always reports core events [ 29453.814] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29453.814] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29453.814] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29453.814] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29453.814] (--) evdev: USB Optical Mouse: Found relative axes [ 29453.814] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29453.814] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29453.814] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29453.814] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29453.814] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29453.814] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input46/event6" [ 29453.814] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29453.814] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29453.814] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29453.814] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29453.814] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29453.814] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29457.852] (II) config/udev: removing device USB Optical Mouse [ 29457.864] (II) evdev: USB Optical Mouse: Close [ 29457.864] (II) UnloadModule: "evdev" [ 29463.526] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29463.526] (II) No input driver specified, ignoring this device. [ 29463.526] (II) This device may have been added with another device file. [ 29463.529] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29463.529] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29463.529] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29463.529] (**) USB Optical Mouse: always reports core events [ 29463.529] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29463.529] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29463.529] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29463.529] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29463.529] (--) evdev: USB Optical Mouse: Found relative axes [ 29463.529] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29463.529] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29463.529] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29463.529] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29463.529] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29463.529] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input47/event6" [ 29463.529] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29463.529] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29463.530] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29463.530] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29463.530] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29463.530] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29475.709] (II) config/udev: removing device USB Optical Mouse [ 29475.722] (II) evdev: USB Optical Mouse: Close [ 29475.722] (II) UnloadModule: "evdev" [ 29481.505] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29481.505] (II) No input driver specified, ignoring this device. [ 29481.505] (II) This device may have been added with another device file. [ 29481.509] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29481.509] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29481.509] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29481.509] (**) USB Optical Mouse: always reports core events [ 29481.509] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29481.509] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29481.509] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29481.509] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29481.509] (--) evdev: USB Optical Mouse: Found relative axes [ 29481.509] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29481.509] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29481.509] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29481.509] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29481.509] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29481.509] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input48/event6" [ 29481.509] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29481.509] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29481.509] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29481.509] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29481.509] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29481.509] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29491.337] (II) config/udev: removing device USB Optical Mouse [ 29491.352] (II) evdev: USB Optical Mouse: Close [ 29491.352] (II) UnloadModule: "evdev" [ 29496.929] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29496.929] (II) No input driver specified, ignoring this device. [ 29496.929] (II) This device may have been added with another device file. [ 29496.931] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29496.931] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29496.931] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29496.931] (**) USB Optical Mouse: always reports core events [ 29496.931] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29496.931] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29496.931] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29496.931] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29496.931] (--) evdev: USB Optical Mouse: Found relative axes [ 29496.931] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29496.931] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29496.931] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29496.931] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29496.931] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29496.931] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input49/event6" [ 29496.931] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29496.931] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29496.931] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29496.931] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29496.931] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29496.931] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29507.205] (II) config/udev: removing device USB Optical Mouse [ 29507.228] (II) evdev: USB Optical Mouse: Close [ 29507.228] (II) UnloadModule: "evdev" [ 29513.131] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29513.131] (II) No input driver specified, ignoring this device. [ 29513.131] (II) This device may have been added with another device file. [ 29513.133] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29513.133] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29513.133] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29513.133] (**) USB Optical Mouse: always reports core events [ 29513.133] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29513.133] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29513.133] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29513.133] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29513.133] (--) evdev: USB Optical Mouse: Found relative axes [ 29513.133] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29513.133] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29513.133] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29513.133] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29513.133] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29513.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input50/event6" [ 29513.133] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29513.133] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29513.134] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29513.134] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29513.134] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29513.134] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29517.372] (II) config/udev: removing device USB Optical Mouse [ 29517.384] (II) evdev: USB Optical Mouse: Close [ 29517.384] (II) UnloadModule: "evdev" [ 29522.885] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29522.885] (II) No input driver specified, ignoring this device. [ 29522.885] (II) This device may have been added with another device file. [ 29522.887] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29522.887] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29522.887] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29522.887] (**) USB Optical Mouse: always reports core events [ 29522.887] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29522.900] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29522.900] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29522.900] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29522.900] (--) evdev: USB Optical Mouse: Found relative axes [ 29522.900] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29522.900] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29522.900] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29522.900] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29522.900] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29522.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input51/event6" [ 29522.900] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29522.900] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29522.900] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29522.900] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29522.900] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29522.900] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29530.022] (II) config/udev: removing device USB Optical Mouse [ 29530.040] (II) evdev: USB Optical Mouse: Close [ 29530.040] (II) UnloadModule: "evdev" [ 29535.616] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 29535.616] (II) No input driver specified, ignoring this device. [ 29535.616] (II) This device may have been added with another device file. [ 29535.618] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 29535.618] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 29535.618] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 29535.618] (**) USB Optical Mouse: always reports core events [ 29535.618] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 29535.618] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 29535.618] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 29535.618] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 29535.618] (--) evdev: USB Optical Mouse: Found relative axes [ 29535.618] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 29535.618] (II) evdev: USB Optical Mouse: Configuring as mouse [ 29535.618] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 29535.618] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 29535.618] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29535.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input52/event6" [ 29535.618] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 29535.619] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 29535.619] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 29535.619] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 29535.619] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 29535.619] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 29979.995] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 29981.378] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 31739.457] (II) config/udev: removing device USB Optical Mouse [ 31739.472] (II) evdev: USB Optical Mouse: Close [ 31739.472] (II) UnloadModule: "evdev" [ 31745.234] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 31745.234] (II) No input driver specified, ignoring this device. [ 31745.234] (II) This device may have been added with another device file. [ 31745.234] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 31745.234] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 31745.234] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 31745.234] (**) USB Optical Mouse: always reports core events [ 31745.234] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 31745.234] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 31745.234] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 31745.234] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 31745.234] (--) evdev: USB Optical Mouse: Found relative axes [ 31745.234] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 31745.234] (II) evdev: USB Optical Mouse: Configuring as mouse [ 31745.234] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 31745.234] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 31745.234] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 31745.235] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input53/event6" [ 31745.235] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 31745.235] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 31745.235] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 31745.235] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 31745.235] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 31745.235] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 35085.218] (II) config/udev: removing device USB Optical Mouse [ 35085.232] (II) evdev: USB Optical Mouse: Close [ 35085.232] (II) UnloadModule: "evdev" [ 35090.889] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 35090.889] (II) No input driver specified, ignoring this device. [ 35090.889] (II) This device may have been added with another device file. [ 35090.893] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 35090.893] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 35090.893] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 35090.893] (**) USB Optical Mouse: always reports core events [ 35090.893] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 35090.893] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5 [ 35090.893] (--) evdev: USB Optical Mouse: Found 9 mouse buttons [ 35090.894] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 35090.894] (--) evdev: USB Optical Mouse: Found relative axes [ 35090.894] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 35090.894] (II) evdev: USB Optical Mouse: Configuring as mouse [ 35090.894] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 35090.894] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 35090.894] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 35090.894] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input54/event6" [ 35090.894] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 35090.894] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 35090.894] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 35090.894] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 35090.894] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 35090.894] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 37373.651] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 37373.651] (II) NVIDIA(GPU-0): Vision stereo. [ 37373.651] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 37373.651] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 37373.651] (**) NVIDIA(0): been enabled on all display devices.) [ 37535.421] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D [ 37535.421] (II) NVIDIA(GPU-0): Vision stereo. [ 37535.421] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 37535.421] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has [ 37535.421] (**) NVIDIA(0): been enabled on all display devices.) [ 39088.570] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 39089.970] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 40462.909] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 40464.296] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 46308.922] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select" [ 46310.291] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 48871.490] (II) evdev: USB Optical Mouse: Close [ 48871.490] (II) UnloadModule: "evdev" [ 48871.490] (II) UnloadModule: "synaptics" [ 48871.490] (II) evdev: AT Translated Set 2 keyboard: Close [ 48871.490] (II) UnloadModule: "evdev" [ 48871.490] (II) evdev: Acer Crystal Eye webcam: Close [ 48871.490] (II) UnloadModule: "evdev" [ 48871.490] (II) evdev: Sleep Button: Close [ 48871.490] (II) UnloadModule: "evdev" [ 48871.490] (II) evdev: Power Button: Close [ 48871.490] (II) UnloadModule: "evdev" [ 48871.490] (II) evdev: Video Bus: Close [ 48871.490] (II) UnloadModule: "evdev" [ 48871.490] (II) evdev: Power Button: Close [ 48871.490] (II) UnloadModule: "evdev" [ 48873.697] (EE) Server terminated successfully (0). Closing log file.
5.8.2014 20:20
Pavel 'TIGER' Růžička | skóre: 54
5.8.2014 22:14
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
6.8.2014 03:48
Pavel 'TIGER' Růžička | skóre: 54
6.8.2014 10:20
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
** (lightdm-gtk-greeter:1647): WARNING **: Failed to load user background: Nelze otevřít soubor „/home/paul/Galerie/Wallpapers/wp22babyept1440.JPG“: Operace zamítnuta ** (lightdm-gtk-greeter:1647): WARNING **: Failed to load user image: Nelze otevřít soubor „/home/paul/.face“: Adresář nebo soubor neexistuje g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting. init: Proces indicator-messages main skončil, spouštím znovu init: Proces indicator-power main (1688) byl ukončen signálem TERM init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-sound main skončil, spouštím znovu init: Proces indicator-application main (1699) byl ukončen signálem TERM init: Proces indicator-application main skončil, spouštím znovu init: Proces indicator-messages main skončil, spouštím znovu init: indicator-messages se obnovuje příliš rychle, zastavuji init: Proces indicator-application main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: indicator-application se obnovuje příliš rychle, zastavuji init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: Proces indicator-power main skončil, spouštím znovu init: indicator-power se obnovuje příliš rychle, zastavuji
6.8.2014 10:37
Pavel 'TIGER' Růžička | skóre: 54
6.8.2014 10:50
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
6.8.2014 16:31
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.10.1, UID=0 PID=1945 [+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/60-lightdm-gtk-greeter.conf [+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf.d/10-xubuntu.conf [+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.00s] DEBUG: Registered seat module xlocal [+0.00s] DEBUG: Registered seat module xremote [+0.00s] DEBUG: Registered seat module unity [+0.00s] DEBUG: Registered seat module surfaceflinger [+0.01s] DEBUG: Adding default seat [+0.01s] DEBUG: Seat: Starting [+0.01s] DEBUG: Seat: Creating greeter session [+0.01s] DEBUG: Seat: Creating display server of type x [+0.01s] DEBUG: Using VT 7 [+0.01s] DEBUG: Seat: Starting local X display on VT 7 [+0.01s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log [+0.01s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0 [+0.01s] DEBUG: DisplayServer x-0: Launching X Server [+0.01s] DEBUG: Launching process 1951: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.01s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0 [+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+0.01s] DEBUG: Loading users from org.freedesktop.Accounts [+0.01s] DEBUG: User /org/freedesktop/Accounts/User1000 added [+3.31s] DEBUG: Got signal 10 from process 1951 [+3.31s] DEBUG: DisplayServer x-0: Got signal from X server :0 [+3.31s] DEBUG: DisplayServer x-0: Connecting to XServer :0 [+3.31s] DEBUG: Seat: Display server ready, starting session authentication [+3.31s] DEBUG: Session pid=1962: Started with service 'lightdm-greeter', username 'lightdm' [+3.38s] DEBUG: Session pid=1962: Authentication complete with return value 0: Success [+3.38s] DEBUG: Seat: Session authenticated, running command [+3.38s] DEBUG: Session pid=1962: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/lightdm-gtk-greeter [+3.40s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm [+3.40s] DEBUG: Session pid=1962: Logging to /var/log/lightdm/x-0-greeter.log [+3.46s] DEBUG: Activating VT 7 [+3.46s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c1 [+4.71s] DEBUG: Session pid=1962: Greeter connected version=1.10.1 [+8.98s] DEBUG: Session pid=1962: Greeter start authentication for paul [+8.98s] DEBUG: Session pid=2161: Started with service 'lightdm', username 'paul' [+9.13s] DEBUG: Session pid=2161: Got 1 message(s) from PAM [+9.13s] DEBUG: Session pid=1962: Prompt greeter with 1 message(s) [+20.03s] DEBUG: Session pid=1962: Continue authentication [+20.07s] DEBUG: Session pid=2161: Authentication complete with return value 0: Success [+20.07s] DEBUG: Session pid=1962: Authenticate result for user paul: Success [+20.07s] DEBUG: Session pid=1962: User paul authorized [+20.08s] DEBUG: Session pid=1962: Greeter sets language cs [+20.12s] DEBUG: Session pid=1962: Greeter requests session xubuntu [+20.12s] DEBUG: Seat: Stopping greeter; display server will be re-used for user session [+20.12s] DEBUG: Session pid=1962: Sending SIGTERM [+20.20s] DEBUG: Session pid=1962: Greeter closed communication channel [+20.20s] DEBUG: Session pid=1962: Exited with return value 0 [+20.20s] DEBUG: Seat: Session stopped [+20.20s] DEBUG: Seat: Greeter stopped, running session [+20.20s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0 [+20.20s] DEBUG: Session pid=2161: Running command /usr/sbin/lightdm-session startxfce4 [+20.20s] DEBUG: Creating shared data directory /var/lib/lightdm-data/paul [+20.20s] DEBUG: Session pid=2161: Logging to .xsession-errors [+20.22s] DEBUG: Activating VT 7 [+20.22s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c2 [+21.67s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+31.88s] DEBUG: User /org/freedesktop/Accounts/User0 added [+36.12s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+47.35s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+64.44s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+122.19s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+4318.60s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+4320.93s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+4484.98s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+4818.79s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+7087.36s] DEBUG: Seat: Locking [+7087.36s] DEBUG: Seat: Creating greeter session [+7087.36s] DEBUG: Seat: Creating display server of type x [+7087.36s] DEBUG: Using VT 8 [+7087.36s] DEBUG: Seat: Starting local X display on VT 8 [+7087.36s] DEBUG: DisplayServer x-1: Logging to /var/log/lightdm/x-1.log [+7087.37s] DEBUG: DisplayServer x-1: Writing X server authority to /var/run/lightdm/root/:1 [+7087.37s] DEBUG: DisplayServer x-1: Launching X Server [+7087.37s] DEBUG: Launching process 4496: /usr/bin/X -core :1 -seat seat0 -auth /var/run/lightdm/root/:1 -nolisten tcp vt8 -novtswitch [+7087.37s] DEBUG: DisplayServer x-1: Waiting for ready signal from X server :1 [+7091.28s] DEBUG: Got signal 10 from process 4496 [+7091.28s] DEBUG: DisplayServer x-1: Got signal from X server :1 [+7091.28s] DEBUG: DisplayServer x-1: Connecting to XServer :1 [+7091.28s] DEBUG: Seat: Display server ready, starting session authentication [+7091.28s] DEBUG: Session pid=4501: Started with service 'lightdm-greeter', username 'lightdm' [+7091.31s] DEBUG: Session pid=4501: Authentication complete with return value 0: Success [+7091.31s] DEBUG: Seat: Session authenticated, running command [+7091.31s] DEBUG: Session pid=4501: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/lightdm-gtk-greeter [+7091.31s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm [+7091.31s] DEBUG: Session pid=4501: Logging to /var/log/lightdm/x-1-greeter.log [+7091.32s] DEBUG: Activating VT 8 [+7091.32s] DEBUG: Locking login1 session /org/freedesktop/login1/session/c2 [+7091.33s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c3 [+7091.43s] DEBUG: Session pid=4501: Greeter connected version=1.10.1 [+7091.81s] DEBUG: Session pid=4501: Greeter start authentication for paul [+7091.81s] DEBUG: Session pid=4587: Started with service 'lightdm', username 'paul' [+7091.82s] DEBUG: Session pid=4587: Got 1 message(s) from PAM [+7091.82s] DEBUG: Session pid=4501: Prompt greeter with 1 message(s) [+7206.28s] DEBUG: User /org/freedesktop/Accounts/User1000 changed [+7227.68s] DEBUG: Session pid=4501: Continue authentication [+7227.71s] DEBUG: Session pid=4587: Authentication complete with return value 0: Success [+7227.71s] DEBUG: Session pid=4501: Authenticate result for user paul: Success [+7227.71s] DEBUG: Session pid=4501: User paul authorized [+7227.71s] DEBUG: Session pid=4501: Greeter sets language cs [+7227.76s] DEBUG: Session pid=4501: Greeter requests session xubuntu [+7227.76s] DEBUG: Seat: Returning to existing user session paul [+7227.76s] DEBUG: Unlocking login1 session /org/freedesktop/login1/session/c2 [+7227.78s] DEBUG: Activating VT 7 [+7229.83s] DEBUG: Seat: Stopping greeter [+7229.83s] DEBUG: Session pid=4501: Sending SIGTERM [+7229.83s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c2 [+7229.84s] DEBUG: Session pid=4587: Exited with return value 0 [+7229.84s] DEBUG: Seat: Session stopped [+7229.89s] DEBUG: Session pid=4501: Greeter closed communication channel [+7229.95s] DEBUG: Session pid=4501: Exited with return value 0 [+7229.95s] DEBUG: Seat: Session stopped [+7229.95s] DEBUG: Seat: Stopping display server, no sessions require it [+7229.95s] DEBUG: Sending signal 15 to process 4496 [+7230.40s] DEBUG: Process 4496 exited with return value 0 [+7230.40s] DEBUG: DisplayServer x-1: X server stopped [+7230.40s] DEBUG: Releasing VT 8 [+7230.40s] DEBUG: DisplayServer x-1: Removing X server authority /var/run/lightdm/root/:1 [+7230.40s] DEBUG: Seat: Display server stopped [+7251.50s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
6.8.2014 16:54
Pavel 'TIGER' Růžička | skóre: 54
5.8.2014 00:57
Pavel 'TIGER' Růžička | skóre: 54
5.8.2014 17:56
pavlix | skóre: 54
| blog: pavlix
5.8.2014 18:56
Pavel 'TIGER' Růžička | skóre: 54
5.8.2014 22:37
pavlix | skóre: 54
| blog: pavlix
6.8.2014 03:44
Pavel 'TIGER' Růžička | skóre: 54
5.8.2014 17:53
pavlix | skóre: 54
| blog: pavlix
6.8.2014 19:18
Pavel 'TIGER' Růžička | skóre: 54
8.8.2014 10:09
paul2no | skóre: 16
| blog: Paulovo doupě
| Praha
AbcLinuxu.cz
ITBiz.cz
HDmag.cz
AbcPráce.cz
libgdk-pixbuf2.0-common, tak uvidíme, jestli to pomůže. Kdyžtak sem zase napíšu, tak to tu sledujte.
Tiskni
Sdílej:
