Dotaz: USB ramecek + 160GB disk - nejde pripojit!

[teekey]

Potreboval bych poradit, jak mam pripojit disk Seagate 160GB, ktery je v USB ramecku (Welland) k notebooku. Kdyz jej pripojim ve WINdows, musim jej nastavit na CABLE SELECT, kdyz jej nastavim na MASTER - tak mi nenande partition a data.

bohuzel v Linuxu mi nejde vubec, tady nejake vypisy: "fdisk -l" Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylindry of 16065 * 512 = 8225280 bytes

Zařízení Boot Start End Blocks Id System /dev/hda1 * 1 638 5124703+ 7 HPFS/NTFS /dev/hda2 639 6760 49174965 7 HPFS/NTFS /dev/hda3 6761 7296 4305420 83 Linux

Disk /dev/sda: 160.0 GB, 160041885696 bytes 16 heads, 63 sectors/track, 310101 cylinders Units = cylindry of 1008 * 512 = 516096 bytes

Zařízení Boot Start End Blocks Id System /dev/sda1 182867 310096 64123447+ c W95 FAT32 (LBA) /dev/sda2 1 182867 92164936+ c W95 FAT32 (LBA)

Diskové oddíly jsou chybně seřazeny

Kdyz zkusim MOUNT: mount /dev/sda1 /mnt/disk mount: speciální zařízení /dev/sda1 neexistuje

Hodne me to mrzi, pac nektere programy sem si oblibyl v Linuxu a libi se mi ze nemusim porad restartovat, ale na disk v notebooku vse nenarvu a tech 160GB proste chybi. Nasel sem tady podobny problem (v diskusi), ale nepodarilo se mi jej dle tipu a rad na tamni problem, ten svuj vyresit :(

"lsmod" Module Size Used by vfat 11200 0 fat 35964 1 vfat sd_mod 15920 0 usb-storage 71168 0 scsi_mod 115784 2 sd_mod,usb-storage fglrx 235676 0 agpgart 28264 1 fglrx cpufreq_ondemand 5244 0 cpufreq_powersave 1376 0 powernow-k7 7112 0 raw 6720 1 md5 3648 1 ipv6 232320 14 rfcomm 33692 0 l2cap 20644 5 rfcomm bluetooth 41380 4 rfcomm,l2cap snd-seq-dummy 2596 0 snd-seq-oss 31584 0 snd-seq-midi-event 6208 1 snd-seq-oss snd-seq 47472 5 snd-seq-dummy,snd-seq-oss,snd-seq-midi-event snd-pcm-oss 49056 0 snd-mixer-oss 17248 2 snd-pcm-oss snd-via82xx 23040 3 snd-ac97-codec 75256 1 snd-via82xx snd-pcm 80776 4 snd-pcm-oss,snd-via82xx,snd-ac97-codec snd-timer 20324 2 snd-seq,snd-pcm snd-page-alloc 7588 2 snd-via82xx,snd-pcm gameport 3328 1 snd-via82xx snd-mpu401-uart 5920 1 snd-via82xx snd-rawmidi 19648 1 snd-mpu401-uart snd-seq-device 6796 4 snd-seq-dummy,snd-seq-oss,snd-seq,snd-rawmidi snd 46980 14 snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-via82xx,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device soundcore 7104 2 snd ipt_TOS 1888 12 ipt_REJECT 5600 4 ipt_pkttype 1248 4 ipt_LOG 6208 7 ipt_state 1376 15 ipt_multiport 2144 0 ipt_conntrack 1984 0 iptable_mangle 2080 1 ip_nat_irc 1568 0 ip_nat_tftp 1280 0 ip_nat_ftp 2272 0 iptable_nat 19068 3 ip_nat_irc,ip_nat_tftp,ip_nat_ftp ip_conntrack_irc 70384 1 ip_nat_irc ip_conntrack_tftp 3056 1 ip_nat_tftp ip_conntrack_ftp 71344 1 ip_nat_ftp ip_conntrack 37400 9 ipt_state,ipt_conntrack,ip_nat_irc,ip_nat_tftp,ip_nat_ftp,iptable_nat,ip_conntrack_irc,ip_conntrack_tftp,ip_conntrack_ftp iptable_filter 2144 1 ip_tables 18176 10 ipt_TOS,ipt_REJECT,ipt_pkttype,ipt_LOG,ipt_state,ipt_multiport,ipt_conntrack,iptable_mangle,iptable_nat,iptable_filter af_packet 16232 2 floppy 54736 0 pcmcia 18632 2 yenta_socket 19720 1 rsrc_nonstatic 9056 1 yenta_socket pcmcia_core 41504 3 pcmcia,yenta_socket,rsrc_nonstatic video 13892 0 thermal 10600 0 tc1100-wmi 5188 0 processor 18164 2 powernow-k7,thermal fan 3108 0 container 3040 0 button 4880 0 battery 7460 0 ac 3300 0 eth1394 17160 0 via-rhine 19364 0 mii 4224 1 via-rhine ide-cd 36772 0 ohci1394 31076 0 ieee1394 292152 2 eth1394,ohci1394 loop 13544 0 nls_iso8859-2 4288 2 ntfs 205368 2 nvram 6984 0 slamr 401000 2 usbkbd 6208 0 tsdev 6016 0 evdev 7744 1 usbmouse 4640 0 xpad 9440 0 usbhid 43712 0 ehci-hcd 28648 0 uhci-hcd 28944 0 usbcore 106008 8 usb-storage,usbkbd,usbmouse,xpad,usbhid,ehci-hcd,uhci-hcd

"dmesg" fglrx:firegl_unlock] *ERROR* Process 7868 using kernel context 0 Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=10.0.0.1 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=10.0.0.1 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 eth0: no IPv6 routers present Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=10.0.0.1 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=10.0.0.1 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=10.0.0.1 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 usb 4-2: new high speed USB device using ehci_hcd and address 4 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: ST316002 Model: 3A Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete SCSI device sda: 66055248 512-byte hdwr sectors (33820 MB) sda: assuming drive cache: write through SCSI device sda: 66055248 512-byte hdwr sectors (33820 MB) sda: assuming drive cache: write through /dev/scsi/host0/bus0/target0/lun0: inconsistent partition table (overlap) Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=10.0.0.1 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=10 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 usb 4-2: USB disconnect, address 4 usb 4-2: new high speed USB device using ehci_hcd and address 5 scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: ST316002 Model: 3A Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through /dev/scsi/host1/bus0/target0/lun0: inconsistent partition table (overlap) Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 usb-storage: device scan complete

Pokud vas napada neco jak to vyresit, sem rad za kazdou radu, ale nevim, zda bych byl ochotny formatovat 160GB disk, prece kdyz to ve WIN funguje, musi i v Linuxu :)

Odpovědi

[Marek Pasovsky]

fdisk -l /dev/hda se neodkazuje na ten disk v USB ramecku - spise by to chtelo zkusit fdisk -l /dev/sda jelikoz v dmesg je videt, ze

usb-storage: device scan complete SCSI device sda: 66055248 512-byte hdwr sectors (33820 MB)

coz asi nebude 160GB disk

IMHO ten usb ramecek nepodporuje 160GB disk (nektere zvladaji jen do 120GB); funguje ten 160GB jako 160GB pod win?

Marek

[teekey]

to bohuzel nevim, pac se mi nechtelo cekat nez mi prijde ramecek - byla dlouha doba expirace a tak sem disk rozdelil u kamarada pomoci Partition Magic na 2 oddily a dal jej do stareho PC, jak dosel ramecek, tak sem do nej dal disk, prehodil jumper a partition se zobrazuji - we windows. Nemam ani tuseni, zda zvladne ramecek vetsi disky, ale podle diskuse k vyrobku, bych rekl ze jo, vice zde: http://www.czechcomputer.cz/product.jsp?artno=30722

[teekey]

sda: 66055248 a nemuze to byt 61,1GB? Protoze jedna partition ma prave 61,1GB a druha ma 87,8GB :) kazdopadne dekuji za tip...

[teekey]

fdisk -l /dev/sda

Disk /dev/sda: 160.0 GB, 160041885696 bytes 16 heads, 63 sectors/track, 310101 cylinders Units = cylindry of 1008 * 512 = 516096 bytes

Zařízení Boot Start End Blocks Id System /dev/sda1 182867 310096 64123447+ c W95 FAT32 (LBA) /dev/sda2 1 182867 92164936+ c W95 FAT32 (LBA)

Diskové oddíly jsou chybně seřazeny

[Luboš Doležel (Doli)]

Co vám vypíše

ls -l /dev/sd*

[David Jaša]

zkus používat tag <pre>.