HP DL385 G7

Technické parametry

• CPU (2 sockety): AMD Magny-Cours Opteron 6128, 8 jader, 2.0 GHz, 8 × 512 KB L2 + 12 MB L3 Cache
• RAM: DDR3 ECC Registered, 12 slotů na každý socket
• Síť: 4 × Gb Ethernet Broadcom NetXtreme II
• SAS řadič: HP SmartArray P410i + volitelně 512 MB Cache + baterie (BBWC) - 2 interní SAS porty
• HDD: V základu 8 šachet na 2.5" Hotplug SATA/SAS, lze osadit druhou klec na dalších 8 ks
• Management: iLO3
• Možnost osadit 2 ks redundantní zdrojů

Identifikace pod Linuxem

lspci

00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only dual slot (2x16) PCI-e GFX Hydra part (rev 02)
00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D)
00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F)
00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A)
00:0b.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (NB-SB link)
00:0d.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port B)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3d)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
02:00.0 System peripheral: Hewlett-Packard Company iLO3 Slave instrumentation & System support (rev 04)
02:00.2 System peripheral: Hewlett-Packard Company iLO3 Management Processor Support and Messaging (rev 04)
02:00.4 USB Controller: Hewlett-Packard Company Proliant iLO2/iLO3 virtual USB controller (rev 01)
03:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
04:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
05:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
09:00.0 PCI bridge: PLX Technology, Inc. PEX 8616 16-lane, 4-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev bb)
0a:04.0 PCI bridge: PLX Technology, Inc. PEX 8616 16-lane, 4-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev bb)
0a:05.0 PCI bridge: PLX Technology, Inc. PEX 8616 16-lane, 4-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev bb)
0a:06.0 PCI bridge: PLX Technology, Inc. PEX 8616 16-lane, 4-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev bb)

ipmi-sensors

# ipmi-sensors
0: UID Light (OEM Reserved): [OEM State = 0000h]
1: Sys. Health LED (OEM Reserved): [OEM State = 0000h]
2: Power Supply 1 (Power Supply): [Presence detected]
3: Power Supply 2 (Power Supply): [Presence detected][Power Supply Failure detected]
4: Power Supplies (Power Supply): [Non-redundant:Sufficient Resources from Redundant]
6: Fan 1 (Fan): [transition to Running]
7: Fan 2 (Fan): [transition to Running]
8: Fan 3 (Fan): [transition to Running]
9: Fan 4 (Fan): [transition to Running]
10: Fan 5 (Fan): [NA]
11: Fan 6 (Fan): [NA]
12: Fans (Fan): [Fully Redundant]
14: Temp 1 (Temperature): 21.00 C (NA/41.00): [OK]
15: Temp 2 (Temperature): 33.00 C (NA/75.00): [OK]
16: Temp 3 (Temperature): NA (NA/75.00): [NA]
17: Temp 4 (Temperature): 37.00 C (NA/87.00): [OK]
18: Temp 5 (Temperature): 37.00 C (NA/87.00): [OK]
19: Temp 6 (Temperature): NA (NA/87.00): [NA]
20: Temp 7 (Temperature): NA (NA/87.00): [NA]
21: Temp 8 (Temperature): 35.00 C (NA/90.00): [OK]
22: Temp 9 (Temperature): 30.00 C (NA/90.00): [OK]
23: Temp 10 (Temperature): 44.00 C (NA/90.00): [OK]
24: Temp 11 (Temperature): 39.00 C (NA/70.00): [OK]
25: Temp 12 (Temperature): 29.00 C (NA/60.00): [OK]
26: Temp 13 (Temperature): 37.00 C (NA/77.00): [OK]
27: Temp 14 (Temperature): 48.00 C (NA/90.00): [OK]
28: Temp 15 (Temperature): 38.00 C (NA/70.00): [OK]
29: Temp 16 (Temperature): 30.00 C (NA/70.00): [OK]
30: Temp 17 (Temperature): 41.00 C (NA/70.00): [OK]
31: Temp 18 (Temperature): 30.00 C (NA/70.00): [OK]
32: Temp 19 (Temperature): 69.00 C (NA/105.00): [OK]
33: Temp 20 (Temperature): 35.00 C (NA/60.00): [OK]
34: Temp 21 (Temperature): NA (NA/70.00): [NA]
35: Temp 22 (Temperature): NA (NA/70.00): [NA]
36: Temp 23 (Temperature): NA (NA/70.00): [NA]
37: Temp 24 (Temperature): NA (NA/70.00): [NA]
38: Temp 25 (Temperature): NA (NA/70.00): [NA]
39: Temp 26 (Temperature): NA (NA/70.00): [NA]
40: Temp 27 (Temperature): NA (NA/70.00): [NA]
41: Temp 28 (Temperature): NA (NA/70.00): [NA]
42: Memory (Memory): [Presence detected]
43: Power Meter (Current): [Device Enabled]

Postup zprovoznění pod Linuxem

Debian Squeeze 64bit funguje bez problému, je potřeba non-free firmware pro síť - balík firmware-bnx2. Používáme jádro linux-headers-2.6.38-bpo.2-amd64 z backports.

Pro management nástroje ke SmartArray kartě je potřeba doinstalova ia32-libs.

Vyčítání teplot je dostupné přes IPMI, v Debianu funguje balík freeipmi-tools a příkaz ipmi-sensors.

Poznámka

Jednovláknový výkon CPU Opteron 6128 je i oproti levným Intel procesorům hodně slabý. Při přenosu dat přes SSH (s použitím blowfish) se nelze dostat na víc než 60 MB/s.

Dobrý je čtyřkanálový řadič RAM, díky kterému lze na jeden CPU osadit např. 48 GB v levných 4 GB modulech, nebo 96 GB jako 12 × 8 GB. Normálně fungují neoriginální paměti Kingston, máme v provozu se 4 sadami s P/N: KVR1333D3D4R9SK3/12G.

LightsOut 3 funguje dobře, pro plný přístup na grafickou konzoli vyžaduje zakoupení extra licence. Zajímavé je, že i bez licence přístup na grafickou KVM funguje, ale náhodně se po několika desítkách sekund odpojuje. Pro Linux je celkem dostatečná možnost dostat se přes SSH na textovou VGA konzoli - iLO příkaz TEXTCONS.

Přes iLO web lze stroj zapnout/restartovat/vypnout, sledovat teploty, aktuální spotřebu energie, a poruchy (RAM, větráky, zdroje).

Řadič SmartArray P410/512MB BBWC, s 8 ks 146 GB 10 krpm SAS disků, RAID50, XFS, dosahuje sekvenčního čtení i zápisu kolem 600 MB/s.

Dokument vytvořil: VSi, 24.10.2011 22:50 | Poslední úprava: VSi, 24.10.2011 23:03 | Historie změn | Zobrazeno: 754×