Dotaz: Disk Seagate ST9100825A

[_mali_]

Zdravim,

mam notebook Asus A6Vm s pevnym diskom ST9100825A. Priblizne kazdych 3-5 minut disk na cca. 30s zamrzne. dmesg o tom pise toto:

[  247.968000] ata1.01: qc timeout (cmd 0xa0)
[  247.968000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[  247.968000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
[  247.968000]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[  255.040000] ata1: port is slow to respond, please be patient (Status 0xd1)
[  277.968000] ata1: port failed to respond (30 secs, Status 0xd1)
[  277.968000] ata1: soft resetting port
[  278.564000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
[  278.628000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
[  278.628000] ata1.00: configured for UDMA/100
[  278.924000] ata1.01: configured for UDMA/33
[  278.924000] ata1: EH complete
[  278.996000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[  279.068000] sda: Write Protect is off
[  279.068000] sda: Mode Sense: 00 3a 00 00
[  279.212000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  279.356000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[  279.428000] sda: Write Protect is off
[  279.428000] sda: Mode Sense: 00 3a 00 00
[  279.432000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Neviete mi pls poradit co stym? Je to hw alebo sw problem? Dakujem

_mali_

Odpovědi

[Zdvori]

jaka je verze jadra? co vypisuje hdparm /dev/sda , sdparm /dev/sda? Vyskytuje se problem napriklad i v win (v pripade dualbootu?)

[_mali_]

Jadro je 2.6.20-16-generic, OS Ubuntu 7.04.

mali@mali ~$ sudo hdparm /dev/sda

/dev/sda:
 IO_support   =  0 (default 16-bit)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 12161/255/63, sectors = 195371568, start = 0
mali@mali ~$ sudo sdparm -v /dev/sda
    /dev/sda: ATA       ST9100825A        3.04
    Request Sense cmd: 03 00 00 00 40 00 
request sense:  Fixed format, current;  Sense key: Illegal Request
 Additional sense: Invalid command operation code
REQUEST SENSE failed

Vo win sa problem nevyskytuje.

[mseed]

Otestuj disk pomoci S.M.A.R.T - Popis jak na to.

[_mali_]

Pri pokuse zapnut SMART dostanem hlasku:

mali@mali ~$ sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

[mseed]

zkus zapnout jen: smartctl --smart=on /dev/sda

nebo: smartctl -d ata --smart=on /dev/sda

nebo se ho rovnou zeptej na vysledek - smartctl -d ata -a /dev/sda

[_mali_]

mali@mali ~$ sudo smartctl -d ata -a /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST9100825A
Serial Number:    5PL10NAY
Firmware Version: 3.04
User Capacity:    100,030,242,816 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Thu Aug 16 10:52:48 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 ( 426) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 111) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always       -       1040417
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       491
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       22
  7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       38115547
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2070
 10 Spin_Retry_Count        0x0013   100   100   034    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       511
187 Unknown_Attribute       0x0032   001   001   000    Old_age   Always       -       4228
189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always       -       0
190 Unknown_Attribute       0x0022   053   037   045    Old_age   Always   In_the_past 22381881851951
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       405
193 Load_Cycle_Count        0x0032   083   083   000    Old_age   Always       -       35513
194 Temperature_Celsius     0x0022   047   063   000    Old_age   Always       -       47 (Lifetime Min/Max 0/13)
195 Hardware_ECC_Recovered  0x001a   083   053   000    Old_age   Always       -       221051286
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1902         -
# 2  Extended offline    Completed without error       00%      1900         -
# 3  Extended offline    Interrupted (host reset)      80%      1898         -
# 4  Short offline       Completed without error       00%      1189         -
# 5  Extended offline    Interrupted (host reset)      90%       864         -
# 6  Short offline       Interrupted (host reset)      40%       864         -
# 7  Extended offline    Interrupted (host reset)      90%       864         -
# 8  Short offline       Completed without error       00%       864         -
# 9  Short offline       Completed without error       00%       862         -
#10  Short offline       Completed without error       00%       729         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[Semo]

To je zname, chyba v driveri na radic diskov. Ked tu das hladat "soft resetting", tak sa dozvies viac. Upgraduj jadro na co najnovsie a kus znova.