Dotaz: KDE blokuje mass storage foťák?

[Non_E]

Ahoj, mám foťák panasonic dmc-tz1, který vždy fungoval perfektně jako mass storage. Zkusil jsem ho připojit zase a nic, skončil jsem na

Dec  9 12:13:04 linwood usb 1-2: new full speed USB device using uhci_hcd and address 4
Dec  9 12:13:04 linwood usb 1-2: configuration #1 chosen from 1 choice
Dec  9 12:13:04 linwood scsi7 : SCSI emulation for USB Mass Storage devices
Dec  9 12:13:04 linwood usb-storage: device found at 4
Dec  9 12:13:04 linwood usb-storage: waiting for device to settle before scanning

Myslel jsem, že jsem něco přehlédl při konfiguraciu kernelu, ale zajímavé však je, že když fotoaparát zapnu předtím, než naběhne KDE, tak se zařízení vytvoří bez problémů. Zkoušel jsem killovat jednotlivé aplikace, které se při startu KDE spouští, ale buď to nepomáhalo nebo jsem sestřelil celé KDE.

Udevmonitor mi v KDE vypíše

# udevmonitor
udevmonitor will print the received events for:
UDEV the event which udev sends out after rule processing
UEVENT the kernel uevent

UEVENT[1197199786.114991] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb)
UEVENT[1197199786.115056] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.5_ep00 (usb_endpoint)
UEVENT[1197199786.120158] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb)
UDEV  [1197199786.128207] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb)
UDEV  [1197199786.130205] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.5_ep00 (usb_endpoint)
UEVENT[1197199786.130957] add      /class/scsi_host/host8 (scsi_host)
UEVENT[1197199786.135612] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep01 (usb_endpoint)
UEVENT[1197199786.135659] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep82 (usb_endpoint)
UDEV  [1197199786.207522] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb)
UDEV  [1197199786.208857] add      /class/scsi_host/host8 (scsi_host)
UDEV  [1197199786.216198] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep01 (usb_endpoint)
UDEV  [1197199786.222302] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep82 (usb_endpoint)
UEVENT[1197199787.108598] remove   /class/scsi_host/host8 (scsi_host)
UDEV  [1197199787.110338] remove   /class/scsi_host/host8 (scsi_host)

V konzoli, když KDE neběží, mi to ale vypíše

udevmonitor will print the received events for:
UDEV the event which udev sends out after rule processing
UEVENT the kernel uevent

UEVENT[1197199941.854391] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb)
UEVENT[1197199941.854430] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.6_ep00 (usb_endpoint)
UEVENT[1197199941.854437] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb)
UDEV  [1197199941.857974] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb)
UDEV  [1197199941.859691] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.6_ep00 (usb_endpoint)
UEVENT[1197199941.860169] add      /class/scsi_host/host9 (scsi_host)
UEVENT[1197199941.864499] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep01 (usb_endpoint)
UEVENT[1197199941.864530] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep82 (usb_endpoint)
UDEV  [1197199941.877018] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb)
UDEV  [1197199941.878562] add      /class/scsi_host/host9 (scsi_host)
UDEV  [1197199941.879860] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep01 (usb_endpoint)
UDEV  [1197199941.881127] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep82 (usb_endpoint)
UEVENT[1197199946.868898] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UEVENT[1197199946.868979] add      /class/scsi_disk/9:0:0:0 (scsi_disk)
UDEV  [1197199946.877969] add      /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UDEV  [1197199946.879591] add      /class/scsi_disk/9:0:0:0 (scsi_disk)
UEVENT[1197199946.902451] add      /block/sde (block)
UEVENT[1197199946.902471] add      /block/sde/sde1 (block)
UEVENT[1197199946.902477] add      /class/scsi_device/9:0:0:0 (scsi_device)
UEVENT[1197199946.902482] add      /class/scsi_generic/sg5 (scsi_generic)
UDEV  [1197199946.912157] add      /class/scsi_generic/sg5 (scsi_generic)
UDEV  [1197199946.913029] add      /class/scsi_device/9:0:0:0 (scsi_device)
UDEV  [1197199947.198128] add      /block/sde (block)
UDEV  [1197199947.552087] add      /block/sde/sde1 (block)

Používám gentoo ~86.

Odpovědi

[miso]

1 - PolicyKit pravidla (vacsinou staci skontrolovat, ci je ten balik nainstalovany)
2 - udev pravidla (pouzi udevtest)

[Non_E]

PolicyKit nainstalován byl, odstranil jsem ho, ale nepomohlo to.
Udevtest jsem pustil, ale moudrý z toho nejsem

# udevtest /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.4_ep82
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.

parse_file: reading '/etc/udev/rules.d/05-udev-early.rules' as rules file
parse_file: reading '/etc/udev/rules.d/10-local.rules' as rules file
parse_file: reading '/dev/.udev/rules.d/10-root-link.rules' as rules file
parse_file: reading '/etc/udev/rules.d/30-kernel-compat.rules' as rules file
parse_file: reading '/etc/udev/rules.d/30-svgalib.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-alsa.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-fuse.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-gentoo.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-video.rules' as rules file
parse_file: reading '/etc/udev/rules.d/50-udev-default.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-cdrom_id.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-input.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-storage-tape.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-storage.rules' as rules file
parse_file: reading '/etc/udev/rules.d/61-persistent-storage-edd.rules' as rules file
parse_file: reading '/etc/udev/rules.d/64-device-mapper.rules' as rules file
parse_file: reading '/etc/udev/rules.d/65-permissions.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-bluetooth-pcmcia.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-bluetooth.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file
parse_file: reading '/etc/udev/rules.d/75-cd-aliases-generator.rules' as rules file
parse_file: reading '/etc/udev/rules.d/75-persistent-net-generator.rules' as rules file
parse_file: reading '/etc/udev/rules.d/80-drivers.rules' as rules file
parse_file: reading '/etc/udev/rules.d/90-hal.rules' as rules file
parse_file: reading '/etc/udev/rules.d/90-network.rules' as rules file
parse_file: reading '/etc/udev/rules.d/95-udev-late.rules' as rules file
parse_file: reading '/etc/udev/rules.d/99-fuse.rules' as rules file
parse_file: reading '/etc/udev/rules.d/99-libgphoto2.rules' as rules file
import_uevent_var: import into environment: 'MAJOR=253'
import_uevent_var: import into environment: 'MINOR=22'
udevtest: looking at device '/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.4_ep82' from subsystem 'usb_endpoint'
udev_rules_get_name: no node name set, will use kernel name 'usbdev1.4_ep82'
udev_db_get_device: found a symlink as db file
udev_device_event: device '/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.4_ep82' already in database, cleanup
udev_node_add: creating device node '/dev/usbdev1.4_ep82', major=253, minor=22, mode=0660, uid=0, gid=0
udevtest: run: 'socket:/org/freedesktop/hal/udev_event'
udevtest: run: 'socket:/org/kernel/udev/monitor'

Zkusil jsem

# mknod /dev/cam1 b 253 22
# mount /dev/cam1 /mnt/loop/
mount: /dev/cam1 není platným blokovým zařízením

, ale nepochodil jsem.

[DNA]

jednou mi zabralo v ovl. centru/periferie/úlož. zařízení kliknout na výchozí

[Non_E]

Vyřešeno, takže pozor, pokud se to stane ještě někomu.

V Ovládacím centru KDE (kcontrol) v Komponentech KDE je nabídka Správci služeb . V dolním seznamu jsou Služby při spuštění. Mezi nimi najdeme Démon upozorňování na média a KDED správce médií. Já měl zaškrtnuté oba. Stačilo mi kterýkoliv odškrtnout a zastavit a foťák fungoval jak má.

[Non_E]

A ještě podotýkám, že stejný negativní efekt má, když v konqueroru otevřu kio media:/

[Jan Grmela]

Tj. chceš říct, že když máš puštěný KDED a do toho si otevřeš media:/, tak se tam foťák neobjeví?