Dotaz: Co si myslíte o tomto nezdrave vypadajicim vypisu z logu?

[J@rys]

Dec  1 18:29:44 Matrix kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Dec  1 18:29:44 Matrix kernel: ata1.00: BMDMA stat 0x24
Dec  1 18:29:44 Matrix kernel: ata1.00: cmd ca/00:18:9f:6f:9f/00:00:00:00:00/e4 tag 0 dma 12288 out
Dec  1 18:29:44 Matrix kernel:          res 51/84:00:b6:6f:9f/84:00:04:00:00/e4 Emask 0x10 (ATA bus error)
Dec  1 18:29:44 Matrix kernel: ata1.00: status: { DRDY ERR }
Dec  1 18:29:44 Matrix kernel: ata1.00: error: { ICRC ABRT }
Dec  1 18:29:44 Matrix kernel: ata1: soft resetting link
Dec  1 18:29:44 Matrix kernel: ata1.00: configured for UDMA/100
Dec  1 18:29:44 Matrix kernel: ata1: EH complete
Dec  1 18:29:44 Matrix kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Dec  1 18:29:44 Matrix kernel: ata1.00: BMDMA stat 0x24
Dec  1 18:29:44 Matrix kernel: ata1.00: cmd ca/00:18:9f:6f:9f/00:00:00:00:00/e4 tag 0 dma 12288 out
Dec  1 18:29:44 Matrix kernel:          res 51/84:00:b6:6f:9f/84:00:04:00:00/e4 Emask 0x10 (ATA bus error)
Dec  1 18:29:44 Matrix kernel: ata1.00: status: { DRDY ERR }
Dec  1 18:29:44 Matrix kernel: ata1.00: error: { ICRC ABRT }
Dec  1 18:29:44 Matrix kernel: ata1: soft resetting link
Dec  1 18:29:44 Matrix kernel: ata1.00: configured for UDMA/100
Dec  1 18:29:44 Matrix kernel: ata1: EH complete
Dec  1 18:29:44 Matrix kernel: ata1.00: limiting speed to UDMA/66:PIO4
Dec  1 18:29:45 Matrix kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Dec  1 18:29:45 Matrix kernel: ata1.00: BMDMA stat 0x24
Dec  1 18:29:45 Matrix kernel: ata1.00: cmd ca/00:18:9f:6f:9f/00:00:00:00:00/e4 tag 0 dma 12288 out
Dec  1 18:29:45 Matrix kernel:          res 51/84:00:b6:6f:9f/84:00:04:00:00/e4 Emask 0x10 (ATA bus error)
Dec  1 18:29:45 Matrix kernel: ata1.00: status: { DRDY ERR }
Dec  1 18:29:45 Matrix kernel: ata1.00: error: { ICRC ABRT }
Dec  1 18:29:45 Matrix kernel: ata1: soft resetting link
Dec  1 18:29:45 Matrix kernel: ata1.00: configured for UDMA/66
Dec  1 18:29:45 Matrix kernel: ata1: EH complete
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec  1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 

Odpovědi

[frEon]

Rychle bych zkontroloval aktualnost zalohy. Ve smartu nic?

[J@rys]

To jsem také udělal. Mám dva disky sda - 80 GB, stary disk PATA , sdb 250 GB novy disk (par mesicu) SATA. U obou je TEST RESULT PASSED.

Ale dalsi udaje me od tohoto faktu nejak vzdaluji..

Matrix:/home/jarda # smartctl /dev/sda -a
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar family
Device Model:     WDC WD800BB-00DKA0
Serial Number:    WD-WCAHL2458249
Firmware Version: 77.07W77
User Capacity:    80 026 361 856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Dec  1 20:49:12 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (2472) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  38) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   086   083   021    Pre-fail  Always       -       2200
  4 Start_Stop_Count        0x0032   095   095   040    Old_age   Always       -       5044
  5 Reallocated_Sector_Ct   0x0033   198   198   140    Pre-fail  Always       -       17
  7 Seek_Error_Rate         0x000b   100   253   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   087   087   000    Old_age   Always       -       9844
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4889
194 Temperature_Celsius     0x0022   108   253   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   199   199   000    Old_age   Always       -       1
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       13769
200 Multi_Zone_Error_Rate   0x0009   200   085   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       802         -
# 2  Conveyance offline  Completed without error       00%       365         -
# 3  Conveyance offline  Completed without error       00%       159         -
# 4  Conveyance offline  Completed without error       00%       157         -
# 5  Conveyance offline  Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 

 

 

Matrix:/home/jarda # smartctl /dev/sdb -a
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.10 family
Device Model:     ST3250410AS
Serial Number:    9RY1V4PL
Firmware Version: 3.AAC
User Capacity:    250 059 350 016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Dec  1 20:52:19 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  64) minutes.
SCT capabilities:              (0x0001) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       123591366
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       454
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   072   060   030    Pre-fail  Always       -       18533361
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       1984
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       452
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   059   055   045    Old_age   Always       -       41 (Lifetime Min/Max 19/41)
194 Temperature_Celsius     0x0022   041   045   000    Old_age   Always       -       41 (0 17 0 0)
195 Hardware_ECC_Recovered  0x001a   080   060   000    Old_age   Always       -       120518408
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       250         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[XSimi]

neni tohle spis radic nebo kabel? 

[J@rys]

Pokud je to radic, pak je to i disk, protoze radice jsou v elektronice disku. Kabel by to byt nemel..

[R]

Podla "ATA bus error" by som povedal, ze je to prave kabel.

[R]

A mas vela "UDMA CRC error count", co to potvrdzuje.

[J@rys]

Me hlavne matou cetnosti nekterych chyb u obou disku.. Vim, ze predchozi verze smartctl neumela dokonale pracovat se sata disky. Pri pohledu nacetnosti chyb u druheho, noveho SATA disku se mi to zda paranoidne prehnane. Realokovane sektory u PATA disku sleduju uz delsi dobu a vim o nich. Dnesni hlaseni z logu me trochu desi.. Kabel nema duvot to byt. S pc jsem ted nic, co se HW zasahu tyka, nedelal.

[Bluebear]

Tipoval bych buď odcházející elektroniku disku, nebo odcházející základní desku. (Kdyby se to stalo s novou základní deskou, tak je klidně možné, že je deska šmejd už z výroby a například trvá na tom, aby konkrétní počet disků byl rozdělen do konkrétních slotů - viděl jsem takových bohužel dost.)

Zálohovat, zálohovat, zálohovat. Pak bych zkusil vyměnit disk za jiný, třeba i půjčený - bude-li to blbnout dál, chyba je jinde, jinak asi umírá disk.

[J@rys]

Ktery z tech 2 disku to je ? Precejenom - oznaceni ata1.00 se rozchazi s klasickym oznacenim pripadneho pevneho disku. Zkousel jsem pomoci par prikazu "(lspci, lsscsi, ...) | grep ata" najit konkretni zarizeni (radic, nebo disk) a bezvysledne..

[J@rys]

Problem vyresen

Sam bych neveril tomu, ze sam od sebe muze odejit i datovy kabel.. Vymnenil jsem ho za jiny 80ti zilovy plochy, misto puvodniho 80ti ziloveho svazkovaneho a jadro si spokojene chrochta bez chyb

MYslim, ze tohle byl typicky pripad toho, ze uzivatel linuxu ma kompletni a detailni prehled o svem hardwaru a kdykoli chce, muze skrze log kontrolovat bezproblemovou cinnost. Nenapada me, jakym zpusobem bych diagnostikoval tutez zavadu ve Windows..

Diky vsem za help !

J@.

[R]

Tie svine 80-zilove sa vedia pekne zlomit a potom to robi blbosti. A neveril by si, ze podobne dokaze blbnut aj SATA kabel.