Dotaz: eee 901 externy monitor 1920x1080 najlepsie cez xrandr

[sulostar]

Zdravim , nedavno som si na notebook nainstaloval Arch linux k dokonalosti chyba uz asi len nastavit rozlisenie exteneho monitora precital som o tom uz dost vela ale velmi mi to nepomohlo takze moj problem je ze xrandr mi neponuka rozlisenie ktore potrebujem 1920x1080 pre externy monitor

 

$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 1368, maximum 4096 x 4096
VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 408mm x 306mm
   1024x768       60.0* 
   800x600        60.3     56.2  
   848x480        60.0  
   640x480        59.9  
LVDS1 connected 1024x600+0+768 (normal left inverted right x axis y axis) 195mm x 113mm
   1024x600       60.0*+
   800x600        85.1     72.2     75.0     60.3     56.2  
   640x480        85.0     72.8     75.0     59.9  
   720x400        85.0  
   640x400        85.1  
   640x350        85.1  
  1920x1080_60.00 (0x1ea)  172.0MHz
        h: width  1920 start 2040 end 2248 total 2576 skew    0 clock   66.8KHz
        v: height 1080 start 1081 end 1084 total 1118           clock   59.7Hz
  1920x1080_59.00 (0x1eb)  169.0MHz
        h: width  1920 start 2040 end 2248 total 2576 skew    0 clock   65.6KHz
        v: height 1080 start 1081 end 1084 total 1117           clock   58.7Hz


$ xrandr --newmode "1920x1080_59.00"  169.77  1920 2040 2248 2576  1080 1081 1084 1117  -HSync +Vsync
X Error of failed request:  BadName (named color or font does not exist)
  Major opcode of failed request:  149 (RANDR)
  Minor opcode of failed request:  16 (RRCreateMode)
  Serial number of failed request:  23
  Current serial number in output stream:  23

$ xrandr --output VGA1 --mode 1920x1080
xrandr: cannot find mode 1920x1080


# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
04:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)

Odpovědi

[sulostar]

a nakoniec som sa vynasiel

# 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync

[ed@UFO ~]$ xrandr --newmode "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 149 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 23 Current serial number in output stream: 23 [ed@UFO ~]$ xrandr --addmode VGA1 1920x1080_60.00 [ed@UFO ~]$ xrandr --addmode VGA1 1920x1080_60.00