Administrace komentářů

efax: 00:18 using hsfmodem-6.03.00lnxt04061800full in class 1
efax: 00:18 dialing T0908082563
efax: 01:10 Warning: number is busy
efax: 01:10 failed -> /tmp/kde-ondrik/kdeprintfax_mzvCQ9B.001
efax: 01:10 done, returning 1 (number busy or modem in use)
Busy...
Will try again in 120 seconds

-----------------------------------


CountryCode:		421
AreaCode:		52
FAXNumber:		+421524566215
LongDistancePrefix:	00
InternationalPrefix:	0
DialStringRules:	/etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#
#
# Modem-related stuff: should refl-ect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use this to supply a hint
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	rtscts		# default
#
ModemNoFlowCmd:		AT&K0		# setup no flow control
ModemHardFlowCmd:	AT&K3		# setup hardware flow control
ModemSoftFlowCmd:	AT&K4		# setup software flow control
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:	!Rockwell
ModemModelQueryCmd:	!RC288DPi
ModemRevQueryCmd:	ATI3		# product information
#
ModemDialCmd:		ATDT%s		# T for tone dialing