VisionBook 835CX

Podpora:	částečná
Ovladač:	v jádře

Technické parametry

Intel Celeron-M 1,2 GHz Chipset: Intel 855GM DVD/CDRW 256 MB RAM 20 GB HDD 3x USB 2.0, IEEE1394, LAN 10/100, PCMCIA, typ II, Card Reader (MS, SM, SD, MMC) Baterie: LiIon (4400 mAh)

Identifikace pod Linuxem

*********************************************************
* CPU
*********************************************************

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 9
model name	: Intel(R) Pentium(R) M processor 1300MHz
stepping	: 5
cpu MHz		: 1296.928
cache size	: 1024 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe tm2 est
bogomips	: 2564.09

*********************************************************
* PCI
*********************************************************

00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller  (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller  (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:02.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b)
01:04.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller (rev 01)
01:04.1 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
01:05.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)

*********************************************************
* boot log
*********************************************************

Linux version 2.4.29 (root@cashbox.kazatelna.cz) (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-112.7.2)) #1 Sat Feb 26 02:54:05 CET 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
 BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data)
 BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS)
 BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
479MB LOWMEM available.
On node 0 totalpages: 122864
zone(0): 4096 pages.
zone(1): 118768 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 OID_00                                    ) @ 0x000e6010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1dffc3a6
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x1dfffb00
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x1dfffb90
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x1dfffbc0
ACPI: SSDT (v001 INSYDE   GV3Ref 0x00001001 INTL 0x02012044) @ 0x1dffc3da
ACPI: DSDT (v001 INSYDE INTELIC4 0x00001004 INTL 0x02002025) @ 0x00000000
Kernel command line: ro root=/dev/hda6 vga=771 video=vesa:redraw
Initializing CPU#0
Detected 1296.928 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2564.09 BogoMIPS
Memory: 483508k/491456k available (1329k kernel code, 7560k reserved, 523k data, 124k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: a7e9f9bf 00000000 00000000 00000000
CPU:             Common caps: a7e9f9bf 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
i8253 count too high! resetting..
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xe9844, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 10 11) *7
ACPI: Embedded Controller [EC0] (gpe 28)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xb0000000, mapped to 0xde80d000, size 937k
vesafb: mode is 800x600x8, linelength=800, pages=71
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS01 at 0x02f8 (irq = 3) is a 8250
Real Time Clock Driver v1.10f
floppy0: no floppy controllers found
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK6021GAS, ATA DISK drive
blk: queue c031b8e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15

Postup zprovoznění pod Linuxem

Výborným zdrojem informací je http://tuxmobil.org/. Umax VisionBook 835CX je těměř identický notebooku Issam 8080.

Prakticky vse funguje. sitovka je via-rhine touchpad je synaptics usb podporuje usb 2.0 firewire je ohci1394 zvukovka: i810_audio, OSS i alsa externi klavesnice funguje ale musi se strcit do jednoho z dvou USB portu na leve strane notebooku grafika je i810, DRI funguje s ovladacem od intelu display ma 1400x1050, je nutne pri bootovani prepsat video bios pomoci programku: /usr/sbin/855resolution 3c 1400 1050 z http://perso.wanadoo.fr/apoirier/ a taky je vhodny pracovat v 16 bit Depth, jinak se nejak blbe prekresluji terminaly (xterm, rxvt, aterm..) ACPI chodi, lze s nim prepinat za chodu frekvenci CPU na 600 nebo 1300 Mhz, sledovat stav baterie atd. pcmcia chodi s yenta_socket cd-dvd/cdrw mechanika v pohode chodi pres ide-scsi wifi jsem jeste nezkousel, na chipu na mini-PCI karte je napsano: agere T-HS2T a ovladace by mely byt zde: http://www.agere.com/mobility/wireless_lan_drivers.html tv-out jsem nezkousel, ale pry se da zprovoznit zabudovanou ctecku flash karet jsem nezkousel softmodem chodi se slmodem:

Feb 26 04:48:56 cashbox kernel: slamr: SmartLink AMRMO modem.
Feb 26 04:48:56 cashbox kernel: slamr: probe 8086:24c6 ICH4 card...
Feb 26 04:48:56 cashbox kernel: slamr: mc97 codec is SIL22
Feb 26 04:48:56 cashbox kernel: slamr: slamr0 is ICH4 card.

Poznámka

Čtečku paměťových karet (ENE CB710) Linux NEpodporuje!

Dokument vytvořil: Begleiter, 6.4.2004 21:46 | Poslední úprava: Begleiter, 27.2.2011 15:09 | Další přispěvatelé: Redakce, Tomas Styblo | Historie změn | Zobrazeno: 1195×