Boudhayan "bbhtt" Bhattcharya v článku Uzavření kapitoly o OpenH264 vysvětluje, proč bylo OpenH264 odstraněno z Freedesktop SDK.
Představeny byly nové verze AI modelů: DeepSeek V3-0324, Google Gemini 2.5 a OpenAI 4o Image Generation.
XZ Utils (Wikipedie) byly vydány ve verzi 5.8.0. Jedná se o první větší vydání od backdooru v XZ v loňském roce.
Byla vydána nová verze 0.40.0 multimediálního přehrávače mpv (Wikipedie) vycházejícího z přehrávačů MPlayer a mplayer2. Přehled novinek, změn a oprav na GitHubu. Požadován je FFmpeg 6.1 nebo novější a také libplacebo 6.338.2 nebo novější.
Byla vydána nová verze 2.20 svobodného video editoru Flowblade (GitHub, Wikipedie). Přehled novinek v poznámkách k vydání. Videoukázky funkcí Flowblade na Vimeu. Instalovat lze také z Flathubu.
LibrePCB, tj. svobodný multiplatformní softwarový nástroj pro návrh desek plošných spojů (PCB), byl vydán ve verzi 1.3.0. Přehled novinek v příspěvku na blogu a v aktualizované dokumentaci. Vypíchnut je interaktivní HTML BOM (Bill of Materials) a počáteční podpora Rustu. Zdrojové kódy LibrePCB jsou k dispozici na GitHubu pod licencí GPLv3.
Minulý měsíc Hector "marcan" Martin skončil jako upstream vývojář linuxového jádra i jako vedoucí projektu Asahi Linux. Vývoj Asahi Linuxu, tj. Linuxu pro Apple Silicon, ale pokračuje dál. Byl publikován březnový přehled dění a novinek z vývoje. Vývojáře lze podpořit na Open Collective.
Ruská firma Operation Zero nabízí až $4 miliony za funkčí exploit komunikační platformy Telegram. Nabídku učinila na platformě X. Firma je známá prodejem exploitů ruské vládě a soukromým společnostem. Další informace na securityweek.com.
Po 9 týdnech vývoje od vydání Linuxu 6.13 oznámil Linus Torvalds vydání Linuxu 6.14. Proč až v pondělí? V neděli prostě zapomněl :-). Přehled novinek a vylepšení na LWN.net: první a druhá polovina začleňovacího okna a Linux Kernel Newbies.
Konference LinuxDays 2025 proběhne o víkendu 4. a 5. října v Praze v areálu ČVUT v Dejvicích na FIT.
AbcLinuxu.cz
ITBiz.cz
HDmag.cz
AbcPráce.cz
rcapache2 status
Inspecting /boot/System.map-2.6.16.21-0.8-smp Loaded 22659 symbols from /boot/System.map-2.6.16.21-0.8-smp. Symbols match kernel version 2.6.16. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Bootdata ok (command line is root=/dev/system/root_lv vga=0x317 use_edd=1 resume=/dev/sda5 splash=silent) <5>Linux version 2.6.16.21-0.8-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon Jul 3 18:25:39 UTC 2006 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003fe7cc00 (usable) <4> BIOS-e820: 000000003fe7cc00 - 000000003fe7ec00 (ACPI NVS) <4> BIOS-e820: 000000003fe7ec00 - 000000003fe80c00 (ACPI data) <4> BIOS-e820: 000000003fe80c00 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) <4> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) <4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) <7>ACPI: RSDP (v002 DELL ) @ 0x00000000000febf0 <7>ACPI: XSDT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x00000000000fd1fa <7>ACPI: FADT (v003 DELL B8K 0x00000014 ASL 0x00000061) @ 0x00000000000fd312 <7>ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050624) @ 0x00000000fffd2658 <7>ACPI: MADT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x00000000000fd406 <7>ACPI: BOOT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x00000000000fd498 <7>ACPI: ASF! (v016 DELL B8K 0x00000014 ASL 0x00000061) @ 0x00000000000fd4c0 <7>ACPI: MCFG (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x00000000000fd527 <7>ACPI: HPET (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x00000000000fd565 <7>ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050624) @ 0x0000000000000000 <6>No NUMA configuration found <6>Faking a node at 0000000000000000-000000003fe7c000 <6>Bootmem setup node 0 0000000000000000-000000003fe7c000 <7>On node 0 totalpages: 257153 <7> DMA zone: 3015 pages, LIFO batch:0 <7> DMA32 zone: 254138 pages, LIFO batch:31 <7> Normal zone: 0 pages, LIFO batch:0 <7> HighMem zone: 0 pages, LIFO batch:0 <6>ACPI: PM-Timer IO Port: 0x808 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <6>Processor #0 6:15 APIC version 20 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <6>Processor #1 6:15 APIC version 20 <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) <6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) <6>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) <6>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) <6>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) <6>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) <6>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) <6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>Setting APIC routing to physical flat <6>ACPI: HPET id: 0x8086a201 base: 0xfed00000 <6>Using ACPI (MADT) for SMP configuration information <6>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) <4>Checking aperture... <6>SMP: Allowing 8 CPUs, 6 hotplug CPUs <4>Built 1 zonelists <5>Kernel command line: root=/dev/system/root_lv vga=0x317 use_edd=1 resume=/dev/sda5 splash=silent <6>bootsplash: silent mode. <4>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 131072 bytes) <6>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. <6>time.c: Detected 1862.050 MHz processor. <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) <4>Memory: 1023348k/1047024k available (1876k kernel code, 23288k reserved, 868k data, 184k init) <4>Calibrating delay using timer specific routine.. 3727.51 BogoMIPS (lpj=7455037) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 256 <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 2048K <4>using mwait in idle threads. <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>CPU0: Thermal monitoring enabled (TM2) <6>checking if image is initramfs... it is <4>Freeing initrd memory: 3148k freed <4> not found! <6>activating NMI Watchdog ... done. <6>Using local APIC timer interrupts. <4>result 16625437 <6>Detected 16.625 MHz APIC timer. <6>Booting processor 1/2 APIC 0x1 <4>Initializing CPU#1 <4>Calibrating delay using timer specific routine.. 3724.17 BogoMIPS (lpj=7448341) <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 2048K <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 1 <6>CPU1: Thermal monitoring enabled (TM2) <4>Intel(R) Xeon(R) CPU 3040 @ 1.86GHz stepping 02 <6>Brought up 2 CPUs <6>testing NMI watchdog ... OK. <4>migration_cost=26 <6>DMI 2.3 present. <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: Using configuration type 1 <3>PCI: BIOS Bug: MCFG area is not E820-reserved <3>PCI: Not using MMCONFIG. <6>ACPI: Subsystem revision 20060127 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 <7>Boot video device is 0000:05:07.0 <6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) <6>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 <6>hpet0: 3 64-bit timers, 14318180 Hz <6>PCI-DMA: Disabling IOMMU. <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: efe00000-efefffff <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:1c.0 <6> IO window: disabled. <6> MEM window: efd00000-efdfffff <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:1c.4 <6> IO window: disabled. <6> MEM window: disabled. <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:1c.5 <6> IO window: disabled. <6> MEM window: efc00000-efcfffff <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: d000-dfff <6> MEM window: efa00000-efbfffff <6> PREFETCH window: e0000000-e7ffffff <6>GSI 16 sharing vector 0xA9 and IRQ 16 <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64 <6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1c.4 to 64 <6>GSI 17 sharing vector 0xB1 and IRQ 17 <6>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 <7>PCI: Setting latency timer of device 0000:00:1c.5 to 64 <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>Simple Boot Flag at 0x7a set to 0x80 <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ <6>audit: initializing netlink socket (disabled) <5>audit(1187164221.804:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:01.0:pcie00] <6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.0:pcie00] <7>Allocate Port Service[0000:00:1c.0:pcie02] <6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1c.4 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.4:pcie00] <7>Allocate Port Service[0000:00:1c.4:pcie02] <6>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 <7>PCI: Setting latency timer of device 0000:00:1c.5 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.5:pcie00] <7>Allocate Port Service[0000:00:1c.5:pcie02] <6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 6144k, total 16384k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=9 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47357 bytes,<6>...found (1024x768, 30410 bytes, v3). <4>Console: switching to colour frame buffer device 123x44 <6>fb0: VESA VGA frame buffer device <6>Real Time Clock Driver v1.12ac <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.101 (c) Dave Jones <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 32768 (order: 6, 262144 bytes) <4>TCP established hash table entries: 131072 (order: 9, 2097152 bytes) <4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <4>ACPI wakeup devices: <4>VBTN PCI0 PCI4 PCI2 PCI3 PCI1 PCI5 PCI6 USB0 USB1 USB2 USB3 <6>ACPI: (supports S0 S1 S4 S5)
<4>Freeing unused kernel memory: 184k freed <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <5>SCSI subsystem initialized <6>ICH7: IDE controller at PCI slot 0000:00:1f.1 <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169 <6>ICH7: chipset revision 1 <6>ICH7: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio <7>Probing IDE interface ide0... <4>hda: TSSTcorp CD-RW/DVD-ROM TS-H492C, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <7>libata version 1.20 loaded. <7>ata_piix 0000:00:1f.2: version 1.05 <7>ata_pci_init_one: pci_dev class+intf: 0x1018f <7>ata_pci_init_one: NO_LEGACY == 0 <6>GSI 18 sharing vector 0xE1 and IRQ 18 <6>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 225 <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>ata1: PATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEC0 irq 225 <6>ata2: PATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEC8 irq 225 <7>ata1: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f61 84:4163 85:7469 86:3e41 87:4163 88:207f 93:0000 <6>ata1: dev 0 ATA-7, max UDMA/133, 312500000 sectors: LBA48 <7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x0000000000000000 <7>ata1: dev 1 cfg 00:427a 49:2f00 82:746b 83:7f61 84:4163 85:7469 86:3e41 87:4163 88:207f 93:0000 <6>ata1: dev 1 ATA-7, max UDMA/133, 312500000 sectors: LBA48 <7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x0000000000000000 <6>ata1: dev 0 configured for UDMA/133 <6>ata1: dev 1 configured for UDMA/133 <7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x0000000000000000 <6>scsi0 : ata_piix <3>ata2: disabling port <6>scsi1 : ata_piix <5> Vendor: ATA Model: WDC WD1600YS-18S Rev: 20.0 <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 > <5>sd 0:0:0:0: Attached scsi disk sda <5> Vendor: ATA Model: WDC WD1600YS-18S Rev: 20.0 <5> Type: Direct-Access ANSI SCSI revision: 05 <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB) <5>sdb: Write Protect is off <7>sdb: Mode Sense: 00 3a 00 00 <5>SCSI device sdb: drive cache: write back <5>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB) <5>sdb: Write Protect is off <7>sdb: Mode Sense: 00 3a 00 00 <5>SCSI device sdb: drive cache: write back <6> sdb: sdb1 <5>sd 0:0:1:0: Attached scsi disk sdb <5>sd 0:0:1:0: Attached scsi generic sg1 type 0 <7>Hotpluggable processor device is not present <7>Hotpluggable processor device is not present <6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com <7>dm-netlink version 0.0.2 loaded <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <7>Losing some ticks... checking if CPU frequency changed. <4>Attempting manual resume <5>ReiserFS: dm-1: found reiserfs format "3.6" with standard journal <5>ReiserFS: dm-1: using ordered data mode <4>reiserfs: using flush barriers
16.8.2007 20:52
frEon | skóre: 40
| Praha
[Wed Aug 15 11:56:59 2007] [notice] Graceful restart requested, doing restart [Wed Aug 15 11:56:59 2007] [notice] Apache/2.2.0 (Linux/SUSE) configured -- resuming normal operations [Wed Aug 15 11:56:59 2007] [error] Failed to change_hat to 'HANDLING_UNTRUSTED_INPUT' [Wed Aug 15 11:56:59 2007] [error] [client 192.168.1.200] client denied by server configuration: /srv/www/htdocs/ [Wed Aug 15 11:56:59 2007] [error] Failed to change_hat to 'HANDLING_UNTRUSTED_INPUT' [Wed Aug 15 11:56:59 2007] [error] [client 192.168.1.200] client denied by server configuration: /srv/www/htdocs/ [Wed Aug 15 11:56:59 2007] [error] Failed to change_hat to 'HANDLING_UNTRUSTED_INPUT' [Wed Aug 15 11:56:59 2007] [error] [client 192.168.1.200] client denied by server configuration: /srv/www/htdocs/ [Wed Aug 15 11:56:59 2007] [error] Failed to change_hat to 'HANDLING_UNTRUSTED_INPUT'
adr 192.168.1.200 port 8080Takze do browseru napis: http://localhost:8080/
))
nyní zkus ls -la /srv/www/ a podívej se či tam je htdocs a jaké má práva. Dále či v něm (/srv/www/htdocs/) je nějaký index.html, pokud ne, tak tam nějaký vlož (nějakou stránku s názvem index.html). Dále záleží, jak máš nastavený apache. Pod kým jede atd. a jestli jsou pak dobře práva. Je to těžké, když stále nechceš sem hodit httpd.conf v čitelné podobě.
Ach jo! Nejprve si prohlédni YAST. Píšeš, že nevíš, kde jsou logovací soubory Apache. Ale přímo v YAST-Síťové služby-HTTP server je tlačítko Logovací soubory. (Jinak /var/log/apache2 - na konsoli mc pro superuživatele) Píšeš, že nevíš jak nastavit Firewall. Podíval ses na YAST-Bezpečnost a uživatelé-Firewall? A nakonec to nejdůležitější. Jseš si jistý, že 127.0.0.200 je localhost? Já ne. Mrkni se na YAST-Síťové služby-jména počítačů. (Vsadím se, že localhost je 127.0.0.1) Ze svého počítače se na svůj lokální server jinak než přes localhost nedostaneš. Do YAST-Síťové služby-HTTP server přidej do kolonky Naslouchat na portu: 127.0.0.1 a port 80. Totéž se objeví v /etc/apache2/listen.conf . Že www stránky jsou v adresáři /srv/www, doufám víš. Zastavit a znovu spustit Apache můžeš v YASTU na HTTP serveru nebo v YAST-Systém-Editor úrovní běhu, kde rovnou uvidíš, jestli server běží nebo ne. Jinak samozřejmě klasicky apache2ctl start, apache2ctl restart, apache2ctl stop. Pro přístup zvenčí potřebuješ klasickou vnější adresu, povolený přístup v listen.conf a otevřený port na firewallu na vnější zóně. Až načerpáš víc znalostí, můžeš se pustit do složitějších konfiguraci na /etc/apache2.
Ještě dodatek.I když YAST základní nastavení velice zjednodušuje, stále platí, že konfigurace serverů pro úplné laiky není. Je třeba si něco přečíst. Ty ses ani nepodíval, jaké možnosti a volby ti YAST dává! Také je dobré se vždy podívat na dokumentaci v /usr/share/dos/packages/..., zvláště, zda tam není soubor README SUSE, který popisuje příp. odlišnosti tohoto distra.
Viz. /usr/share/doc/packages/apache2, /usr/share/Apache2/
Tiskni
Sdílej:
