Dotaz: dialkove ovladanie na ovladanie xbmc

[jany2]

Mam klasicky PC i686 v nom mam PCI DVB-S2 kartu a frontend xbmc.

Pokial som pouzival Windows, tak mi fungovalo s DVBViewerom korektne dialkove Technisat TTS35AI (dodavane s PCI kartou). Cidlo nemam usb ani rs232, ale na PCI karte mam jack, kde sa pripaja aj cidlo. Nejake navody som na nete nasiel, ale tie pojednavali hlavne o cidle pripojenom cez seriak, alebo cez usb. Hladal som aj zvlast IR cidlo, ale boli dost drahe cca 8-10€ a ak som si pozical na test, tak to nefungovalo (alebo som to nevedel rozchodit).

Hladam preto nejake lacne dialkove aby fungovalo dobre s xbmc. Pozadujem len bezne prepinanie kanalov, (mute +-), favoritne, epg ... nepotrebijem nic viac. Uplne by sa mi hodilo aj toto ale chcem vediet ci to niekto pouziva a ako to funguje

Odpovědi

[BigWrigley]

Zdravim. Resil jsem stejny problem, nakonec jsem skoncil u Lenovo N5902. Ale neni to nejlevnejsi.

[mino]

lirc

dialkove TTS35AI lircd.conf

Vstup na karte pre cidlo je vascinou v /dev/lirc0 (1,2,... podla poctu kariet s takypmto vstupom)

/etc/lirc/hardware.conf

REMOTE="TS35"

REMOTE_MODULES="lirc_dev" #pre seriovy port lirc_serial

REMOTE_DRIVER=""

REMOTE_DEVICE="/dev/lirc0"

REMOTE_LIRCD_CONF="lircd.conf"

REMOTE_LIRCD_ARGS=""

restartuj lirc

skuska irw

[jany2]

Takze /etc/lirc/hardware.conf

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="TS35"
REMOTE_MODULES="lirc_dev"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF="lircd.conf"
REMOTE_LIRCD_ARGS=""

#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""

#Disable kernel support.
#Typically, lirc will disable in-kernel support for ir devices in order to
#handle them internally.  Set to false to prevent lirc from disabling this
#in-kernel support. 
#DISABLE_KERNEL_SUPPORT="true"

#Enable lircd
START_LIRCD="false"

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"

#Try to load appropriate kernel modules
LOAD_MODULES="true"

# Default configuration files for your hardware if any
LIRCMD_CONF=""

#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""

/etc/lirc/lircd.conf

#This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.
#
#Feel free to add any custom remotes to the configuration
#via additional include directives or below the existing
#Ubuntu include directives from your selected remote and/or
#transmitter.

begin remote

  name	Technisat_TTS35AI.conf
  bits		 13
  flags	RC5|CONST_LENGTH
  eps		 30
  aeps		100

  one		882   803
  zero		882   803
  plead		905
  gap	       112766
  toggle_bit	  2


      begin codes
          KEY_POWER                0x1A8C                    #  Was: Power
          KEY_MUTE                 0x1A8D                    #  Was: Mute
          KEY_1                    0x1281                    #  Was: 1
          KEY_2                    0x1A82                    #  Was: 2
          KEY_3                    0x1283                    #  Was: 3
          KEY_4                    0x1A84                    #  Was: 4
          KEY_5                    0x1285                    #  Was: 5
          KEY_6                    0x1A86                    #  Was: 6
          KEY_7                    0x1287                    #  Was: 7
          KEY_8                    0x1A88                    #  Was: 8
          KEY_9                    0x1289                    #  Was: 9
          KEY_0                    0x1A80                    #  Was: 0
          KEY_102ND                0x128A                    #  Was: -/--
	  A/B			   0x1AA3
          KEY_RED                  0x0AAB                    #  Was: Red
          KEY_GREEN                0x02AC                    #  Was: Green
          KEY_YELLOW               0x0AAD                    #  Was: Yellow
          KEY_BLUE                 0x02AE                    #  Was: Blue
          KEY_OK                   0x0A97                    #  Was: Ok
          KEY_UP                   0x12A0                    #  Was: Up
          KEY_DOWN                 0x1AA1                    #  Was: Down
          KEY_LEFT                 0x1291                    #  Was: Left
          KEY_RIGHT                0x1A90                    #  Was: Right
	  SFI			   0x12AF
          KEY_BACK                 0x1AA2                    #  Was: Back
          KEY_INFO                 0x028F                    #  Was: Info
#	   Prog+		    0x1AA0
#	   Prog-		    0x12A1
	  TV/Radio		   0x0293
#	   Volume+		    0x1A90
#	   Volume-		    0x1291
          KEY_MENU                 0x0A92                    #  Was: Menu
	  Hilfe			   0x1A8F
          KEY_TEXT                 0x12BC                    #  Was: TXT
          KEY_STOP                 0x1AA9                    #  Was: STOP
	  EXT			   0x12B8
	  HILFE2		   0x0AB6
      end codes

end remote

sudo service lirc restart

irw

connect: No such file or directory

Asi nieco robim spatne

[dustin]

A máš to /dev/lirc0?

[jany2]

a pozeram, ze to tam nemam hmm...