Dotaz: pv951 bez zvuku

[kolage]

Zdravim,

mam nasledujici problem... Mam kartu Mediaforte PV-951 pod Ubuntu 7.10, podle rad ktere jsem nasel primo k teto karte jsem ji probnul jako: modprobe bttv card=42 tuner=5 radio=1 . Pod tvtime jsem pak bez problemu naladil vsechny kanaly co jsem potreboval, ale problem je se zvukem ktery vubec nejde. Mam kabelem probojeny audio-out z TV karty do line-in ve zvukarne, zkousel jsem jestli nemam neco mute v mixeru, ale nemam, mam nastaveny aj capture na line-in a zvuk z tv karty nevychazi ani kdyz do ni primo zapojim sluchatka...

Prikladam jeste vypis dmesg ...

[   34.550051] bttv: driver version 0.9.17 loaded
[   34.550057] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   34.550130] bttv: Bt8xx card found (0).
[   34.550161] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[   34.550173] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio: 0xea000000
[   34.550182] bttv0: using: ProVideo PV951 [card=42,insmod option]
[   34.550221] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[   34.920824] hda: max request size: 128KiB
[   34.978225] hda: Host Protected Area detected.
[   34.978228]  current capacity is 58631231 sectors (30019 MB)
[   34.978229]  native  capacity is 58633344 sectors (30020 MB)
[   34.978402] bttv0: using tuner=5
[   34.978406] bttv0: i2c: checking for TDA9875 @ 0xb0... <6>hda: Host Protected Area disabled.
[   35.078889] hda: 58633344 sectors (30020 MB) w/512KiB Cache, CHS=58168/16/63, UDMA(100)
[   35.078897] hda: cache flushes not supported
[   35.078961]  hda: hda1
[   35.207304] hdb: max request size: 512KiB
[   35.437948] hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[   35.513320] usbcore: registered new interface driver hiddev
[   35.528758] input: Chicony USB Keyboard as /class/input/input1
[   35.528810] input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:10.3-1
[   35.565494] input: Chicony USB Keyboard as /class/input/input2
[   35.565631] input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:10.3-1
[   35.579634] input: A4Tech Wireless Battery Free Optical Mouse as /class/input/input3
[   35.579706] input: USB HID v1.10 Mouse [A4Tech Wireless Battery Free Optical Mouse] on usb-0000:00:10.3-2
[   35.579725] usbcore: registered new interface driver usbhid
[   35.579730] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   35.581206] hdb: cache flushes supported
[   35.581286]  hdb:<6>input: PC Speaker as /class/input/input4
[   35.674292] usbcore: registered new interface driver xpad
[   35.674299] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[   35.696629]  hdb1
[   35.696965] not found
[   35.696969] bttv0: i2c: checking for TDA7432 @ 0x8a... <6>hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[   35.711521] Uniform CD-ROM driver Revision: 3.20
[   35.724745] hdd: max request size: 512KiB
[   35.731403] hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[   35.736625] hdd: cache flushes supported
[   35.736695]  hdd:not found
[   35.756386]  hdd1
[   35.778568] parport_pc 00:0b: reported by Plug and Play ACPI
[   35.778614] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   36.346313] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[   36.374655] i2c-adapter i2c-0: sendbytes: error - bailout.
[   36.375244] i2c-adapter i2c-0: sendbytes: error - bailout.
[   36.376716] tuner 0-004b: chip found @ 0x96 (bt878 #0 [sw])
[   36.376756] tda9887 0-004b: tda988[5/6/7] found @ 0x4b (tuner)
[   36.377712] tuner 0-0060: All bytes are equal. It is not a TEA5767
[   36.377714] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
[   36.377728] tuner 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[   36.377731] tuner 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[   36.385749] bttv0: registered device video0
[   36.385783] bttv0: registered device vbi0
[   36.385816] bttv0: registered device radio0
[   36.385837] bttv0: PLL: 28636363 => 35468950 .. ok
[   36.417821] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 20
[   36.418927] mpu401_uart: unable to grab port 0x330 size 2
[   36.418937] cmipci: no UART401 device at 0x330
[   36.440592] bt878: AUDIO driver version 0.0.0 loaded
[   36.440643] bt878: Bt878 AUDIO function found (0).
[   36.440664] ACPI: PCI Interrupt 0000:00:0b.1[A] -> GSI 19 (level, low) -> IRQ 19
[   36.440671] bt878_probe: card id=[0x0], Unknown card.
[   36.440673] Exiting..
[   36.440677] ACPI: PCI interrupt for device 0000:00:0b.1 disabled
[   36.440682] bt878: probe of 0000:00:0b.1 failed with error -22
[   37.117134] lp0: using parport0 (interrupt-driven).
[   37.171626] Adding 1244996k swap on /dev/sda5.  Priority:-1 extents:1 across:1244996k
[   37.191954] Adding 1020088k swap on /dev/sda6.  Priority:-2 extents:1 across:1020088k
[   37.727942] EXT3 FS on sda8, internal journal
[   39.091802] kjournald starting.  Commit interval 5 seconds
[   39.091959] EXT3 FS on sda9, internal journal
[   39.091966] EXT3-fs: mounted filesystem with ordered data mode.
[   39.417093] kjournald starting.  Commit interval 5 seconds
[   39.417249] EXT3 FS on sda1, internal journal
[   39.417255] EXT3-fs: mounted filesystem with ordered data mode.
[   39.442502] kjournald starting.  Commit interval 5 seconds
[   39.442650] EXT3 FS on sda10, internal journal
[   39.442656] EXT3-fs: mounted filesystem with ordered data mode.
[   41.959636] No dock devices found.
[   42.048869] input: Power Button (FF) as /class/input/input5
[   42.054377] ACPI: Power Button (FF) [PWRF]
[   42.088381] input: Power Button (CM) as /class/input/input6
[   42.093869] ACPI: Power Button (CM) [PWRB]
[   43.573773] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   43.875524] NET: Registered protocol family 10
[   43.875740] lo: Disabled Privacy Extensions
[   44.547443] ppdev: user-space parallel port driver
[   44.687152] audit(1197743137.648:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4854 profile="/usr/sbin/cupsd"
[   46.515472] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   46.515479] apm: overridden by ACPI.
[   46.894052] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   47.053496] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   47.076245] NFSD: starting 90-second grace period
[   47.784895] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   47.784902] vboxdrv: Successfully done.
[   48.437636] Failure registering capabilities with primary security module.
[   50.275074] Bluetooth: Core ver 2.11
[   50.275226] NET: Registered protocol family 31
[   50.275229] Bluetooth: HCI device and connection manager initialized
[   50.275234] Bluetooth: HCI socket layer initialized
[   50.325520] Bluetooth: L2CAP ver 2.8
[   50.325526] Bluetooth: L2CAP socket layer initialized
[   50.584458] Bluetooth: RFCOMM socket layer initialized
[   50.584568] Bluetooth: RFCOMM TTY layer initialized
[   50.584571] Bluetooth: RFCOMM ver 1.8
[   52.763117] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   52.768866] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[   52.769231] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[   53.010556] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[   53.253816] NET: Registered protocol family 17
[   56.129007] /dev/vmmon[5873]: VMCI: Driver initialized.
[   56.132324] /dev/vmmon[5873]: Module vmmon: registered with major=10 minor=165
[   56.132674] /dev/vmmon[5873]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
[   56.132679] /dev/vmmon[5873]: Module vmmon: initialized
[   56.165703] [fglrx] Internal AGP support requested, but kernel AGP support active.
[   56.165712] [fglrx] Have to use kernel AGP support to avoid conflicts.
[   56.165717] [fglrx] AGP detected, AgpState   = 0x1f000a1b (hardware caps of chipset)
[   56.166501] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   56.166699] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   56.166926] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   56.167157] [fglrx] AGP enabled,  AgpCommand = 0x1f000312 (selected caps)
[   56.177179] [fglrx] total      GART = 134217728
[   56.177189] [fglrx] free       GART = 118222848
[   56.177192] [fglrx] max single GART = 118222848
[   56.177194] [fglrx] total      LFB  = 134217728
[   56.177196] [fglrx] free       LFB  = 116002816
[   56.177198] [fglrx] max single LFB  = 116002816
[   56.177200] [fglrx] total      Inv  = 134217728
[   56.177202] [fglrx] free       Inv  = 134217728
[   56.177203] [fglrx] max single Inv  = 134217728
[   56.177205] [fglrx] total      TIM  = 0
[   56.864141] /dev/vmnet: open called by PID 5918 (vmnet-bridge)
[   56.864515] /dev/vmnet: hub 0 does not exist, allocating memory.
[   56.864696] /dev/vmnet: port on hub 0 successfully opened
[   56.864870] bridge-eth0: enabling the bridge
[   56.865021] bridge-eth0: up
[   56.865144] bridge-eth0: already up
[   56.865149] bridge-eth0: attached
[   57.644474] /dev/vmnet: open called by PID 5934 (vmnet-dhcpd)
[   57.644705] /dev/vmnet: hub 1 does not exist, allocating memory.
[   57.644888] /dev/vmnet: port on hub 1 successfully opened
[   57.680082] /dev/vmnet: open called by PID 5947 (vmnet-dhcpd)
[   57.680317] /dev/vmnet: hub 8 does not exist, allocating memory.
[   57.680507] /dev/vmnet: port on hub 8 successfully opened
[   57.708701] /dev/vmnet: open called by PID 5952 (vmnet-natd)
[   57.709017] /dev/vmnet: port on hub 8 successfully opened
[   65.835696] eth0: no IPv6 routers present
[   67.621926] /dev/vmnet: open called by PID 6172 (vmnet-netifup)
[   67.621949] /dev/vmnet: port on hub 1 successfully opened
[   67.647913] /dev/vmnet: open called by PID 6183 (vmnet-netifup)
[   67.648038] /dev/vmnet: port on hub 8 successfully opened
[   78.370107] vmnet8: no IPv6 routers present
[   78.550021] vmnet1: no IPv6 routers present
[   91.316248] i2c-adapter i2c-0: sendbytes: error - bailout.
[   91.316273] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  132.881401] i2c-adapter i2c-0: sendbytes: error - bailout.
[  132.881427] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  132.883272] i2c-adapter i2c-0: sendbytes: error - bailout.
[  132.883290] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  132.883652] i2c-adapter i2c-0: sendbytes: error - bailout.
[  132.883671] tuner 0-0060: i2c i/o error: rc == -14 (should be 4)
[  134.201094] tda9887 0-004b: i2c i/o error: rc == -121 (should be 4)
[  134.201426] i2c-adapter i2c-0: sendbytes: error - bailout.
[  134.201446] tuner 0-0060: i2c i/o error: rc == -14 (should be 4)
[  134.201837] i2c-adapter i2c-0: sendbytes: error - bailout.
[  134.201855] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  134.920761] i2c-adapter i2c-0: sendbytes: error - bailout.
[  134.920786] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  134.922359] i2c-adapter i2c-0: sendbytes: error - bailout.
[  134.922377] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  135.480260] i2c-adapter i2c-0: sendbytes: error - bailout.
[  135.480286] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  135.482088] tda9887 0-004b: i2c i/o error: rc == -121 (should be 4)
[  136.000378] i2c-adapter i2c-0: sendbytes: error - bailout.
[  136.000406] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  136.001970] i2c-adapter i2c-0: sendbytes: error - bailout.
[  136.001988] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  136.002368] i2c-adapter i2c-0: sendbytes: error - bailout.
[  136.002386] tuner 0-0060: i2c i/o error: rc == -14 (should be 4)
[  136.519884] i2c-adapter i2c-0: sendbytes: error - bailout.
[  136.519910] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  136.520360] i2c-adapter i2c-0: sendbytes: error - bailout.
[  136.520378] tuner 0-0060: i2c i/o error: rc == -14 (should be 4)
[  136.520754] i2c-adapter i2c-0: sendbytes: error - bailout.
[  136.520772] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  143.317383] i2c-adapter i2c-0: sendbytes: error - bailout.
[  143.317408] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  143.319201] tda9887 0-004b: i2c i/o error: rc == -121 (should be 4)
[  144.277221] i2c-adapter i2c-0: sendbytes: error - bailout.
[  144.277247] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  144.277644] i2c-adapter i2c-0: sendbytes: error - bailout.
[  144.277662] tuner 0-0060: i2c i/o error: rc == -14 (should be 4)
[  144.278054] i2c-adapter i2c-0: sendbytes: error - bailout.
[  144.278071] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  145.276655] i2c-adapter i2c-0: sendbytes: error - bailout.
[  145.276681] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)
[  145.277126] i2c-adapter i2c-0: sendbytes: error - bailout.
[  145.277145] tuner 0-0060: i2c i/o error: rc == -14 (should be 4)
[  145.278202] i2c-adapter i2c-0: sendbytes: error - bailout.
[  145.278221] tda9887 0-004b: i2c i/o error: rc == -14 (should be 4)

Nemate nekdo nejaky napad ? ... Predem dekuji za kazdou odpoved.

Odpovědi

[Vlastimil Ott]

Bylo by fajn, kdybys sem to to řešení postl, když víš, že to štve tolik lidí...

http://ubuntuforums.org/showthread.php?p=4023376

Řešení podle https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.15/+bug/29789/comments/40:

 I solved a problem passing i2c_udelay parameter for bttv module. Now my /etc/modprobe.conf looks like this:
  options bttv radio=1 tuner=28 card=72 gbuffers=4 i2c_udelay=128
  Perhaps i2c_udelay=16 will be enough too - need to check. With this parameter sound from tv works ok on 2.6.22 (from Gutsy) as well as on 2.6.24rc5 (from Hardy Alpha2).

Hurá! Jede to.