Dotaz: NVIDIA Quadro NVS 290 TwinView nenajde druhy monitor?

[CIJOML]

Zdravim,

dostal jsem

01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 290 (rev a1)

Stahnul jsem a prelozil drivery NVIDIA-Linux-x86_64-169.12-pkg2.run driver se nainstaluje, pouzije, ale kdyz mu zadam twinview do konfiguraku:

Section "Device"

    #Driver         "intel"
    Identifier     "Generic Video Card"
    Driver         "nvidia"


#the TwinView stuff
    Option     "TwinView"
    Option     "MetaModes"  "1280x1024,1280x1024; 1280x1024; 1024x768,1024x768; 1024x768; 800x600,800x600; 800x600"
    Option     "TwinViewOrientation"      "RightOf"
    Option     "SecondMonitorHorizSync"   "UseEdidFreqs"
    Option     "SecondMonitorVertRefresh" "UseEdidFreqs"

EndSection

(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView"
(**) NVIDIA(0): Option "TwinViewOrientation" "RightOf"
(**) NVIDIA(0): Option "SecondMonitorHorizSync" "UseEdidFreqs"
(**) NVIDIA(0): Option "SecondMonitorVertRefresh" "UseEdidFreqs"
(**) NVIDIA(0): Option "MetaModes" "1280x1024,1280x1024; 1280x1024; 1024x768,1024x768; 1024x768; 800x600,800x600; 800x600"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro NVS 290 (G86GL) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.5b.00.22
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro NVS 290 at PCI:1:0:0:
(--) NVIDIA(0):     Samsung SyncMaster (DFP-0)
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): Invalid display device in Mode Description "1280x1024"
(WW) NVIDIA(0): Not using mode description "1280x1024"; unable to map to
(WW) NVIDIA(0):     display device
(WW) NVIDIA(0): Invalid display device in Mode Description "1024x768"
(WW) NVIDIA(0): Not using mode description "1024x768"; unable to map to
(WW) NVIDIA(0):     display device
(WW) NVIDIA(0): Invalid display device in Mode Description "800x600"
(WW) NVIDIA(0): Not using mode description "800x600"; unable to map to display
(WW) NVIDIA(0):     device
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1280x1024,1280x1024"
(II) NVIDIA(0):     "1280x1024"
(II) NVIDIA(0):     "1024x768,1024x768"
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "800x600,800x600"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.

Z te karty leze jen jeden konektor, ktery je rozvetven na 2 DVI. Nevite nekdo co s tim? Akcelerace na tom jednom monitoru co je rozpoznan funguje...

Diky.

Odpovědi

[Luboš Doležel (Doli)]

Je ta karta detekována v nvidia-settings?

[CIJOML]

vypada to, ze snad ano

cijoml@optiplex:~$ nvidia-settings --query=all

Attributes for optiplex:0.0:

  Attribute 'DigitalVibrance' (optiplex:0.0; display device: DFP-0): 0.
    The valid values for 'DigitalVibrance' are in the range 0 - 1023 (inclusive).
    'DigitalVibrance' is display device specific.
    'DigitalVibrance' can use the following target types: X Screen, GPU.

  Attribute 'BusType' (optiplex:0.0): 2.
    The valid values for 'BusType' are in the range 0 - 3 (inclusive).
    'BusType' is a read-only attribute.
    'BusType' can use the following target types: X Screen, GPU.

  Attribute 'BusRate' (optiplex:0.0): 16.
    The valid values for 'BusRate' are in the range 1 - 16 (inclusive).
    'BusRate' is a read-only attribute.
    'BusRate' can use the following target types: X Screen, GPU.

  Attribute 'VideoRam' (optiplex:0.0): 262144.
    'VideoRam' is an integer attribute.
    'VideoRam' is a read-only attribute.
    'VideoRam' can use the following target types: X Screen, GPU.

  Attribute 'Irq' (optiplex:0.0): 16.
    'Irq' is an integer attribute.
    'Irq' is a read-only attribute.
    'Irq' can use the following target types: X Screen, GPU.

  Attribute 'OperatingSystem' (optiplex:0.0): 0.
    The valid values for 'OperatingSystem' are in the range 0 - 2 (inclusive).
    'OperatingSystem' is a read-only attribute.
    'OperatingSystem' can use the following target types: X Screen, GPU.

  Attribute 'SyncToVBlank' (optiplex:0.0): 0.
    'SyncToVBlank' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'SyncToVBlank' can use the following target types: X Screen.

  Attribute 'AllowFlipping' (optiplex:0.0): 1.
    'AllowFlipping' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'AllowFlipping' can use the following target types: X Screen.

  Attribute 'LogAniso' (optiplex:0.0): 0.
    The valid values for 'LogAniso' are in the range 0 - 4 (inclusive).
    'LogAniso' can use the following target types: X Screen.

  Attribute 'FSAA' (optiplex:0.0): 0.
    Valid values for 'FSAA' are: 0, 1, 5, 7, 8, 10 and 12.
    'FSAA' can use the following target types: X Screen.

  Attribute 'TextureSharpen' (optiplex:0.0): 0.
    'TextureSharpen' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'TextureSharpen' can use the following target types: X Screen.

  Attribute 'TwinView' (optiplex:0.0): 0.
    'TwinView' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'TwinView' is a read-only attribute.
    'TwinView' can use the following target types: X Screen.

  Attribute 'ConnectedDisplays' (optiplex:0.0): 0x00010000.
    'ConnectedDisplays' is a bitmask attribute.
    'ConnectedDisplays' is a read-only attribute.
    'ConnectedDisplays' can use the following target types: X Screen, GPU.

  Attribute 'EnabledDisplays' (optiplex:0.0): 0x00010000.
    'EnabledDisplays' is a bitmask attribute.
    'EnabledDisplays' is a read-only attribute.
    'EnabledDisplays' can use the following target types: X Screen, GPU.

  Attribute 'AssociatedDisplays' (optiplex:0.0): 0x00010000.
    'AssociatedDisplays' is a bitmask attribute.
    'AssociatedDisplays' can use the following target types: X Screen.

  Attribute 'Depth30Allowed' (optiplex:0.0): 0.
    'Depth30Allowed' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'Depth30Allowed' is a read-only attribute.
    'Depth30Allowed' can use the following target types: X Screen, GPU.

  Attribute 'ForceGenericCpu' (optiplex:0.0): 0.
    'ForceGenericCpu' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'ForceGenericCpu' can use the following target types: X Screen.

  Attribute 'GammaCorrectedAALines' (optiplex:0.0): 0.
    'GammaCorrectedAALines' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'GammaCorrectedAALines' can use the following target types: X Screen.

  Attribute 'CursorShadow' (optiplex:0.0): 0.
    'CursorShadow' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'CursorShadow' can use the following target types: X Screen.

  Attribute 'CursorShadowXOffset' (optiplex:0.0): 4.
    The valid values for 'CursorShadowXOffset' are in the range 0 - 32 (inclusive).
    'CursorShadowXOffset' can use the following target types: X Screen.

  Attribute 'CursorShadowYOffset' (optiplex:0.0): 2.
    The valid values for 'CursorShadowYOffset' are in the range 0 - 32 (inclusive).
    'CursorShadowYOffset' can use the following target types: X Screen.

  Attribute 'CursorShadowAlpha' (optiplex:0.0): 64.
    The valid values for 'CursorShadowAlpha' are in the range 0 - 254 (inclusive).
    'CursorShadowAlpha' can use the following target types: X Screen.

  Attribute 'CursorShadowRed' (optiplex:0.0): 0.
    The valid values for 'CursorShadowRed' are in the range 0 - 255 (inclusive).
    'CursorShadowRed' can use the following target types: X Screen.

  Attribute 'CursorShadowGreen' (optiplex:0.0): 0.
    The valid values for 'CursorShadowGreen' are in the range 0 - 255 (inclusive).
    'CursorShadowGreen' can use the following target types: X Screen.

  Attribute 'CursorShadowBlue' (optiplex:0.0): 0.
    The valid values for 'CursorShadowBlue' are in the range 0 - 255 (inclusive).
    'CursorShadowBlue' can use the following target types: X Screen.

  Attribute 'FSAAAppControlled' (optiplex:0.0): 1.
    'FSAAAppControlled' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'FSAAAppControlled' can use the following target types: X Screen.

  Attribute 'LogAnisoAppControlled' (optiplex:0.0): 1.
    'LogAnisoAppControlled' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'LogAnisoAppControlled' can use the following target types: X Screen.

  Attribute 'RefreshRate' (optiplex:0.0; display device: DFP-0): 60.02 Hz.
    'RefreshRate' is an integer attribute.
    'RefreshRate' is a read-only attribute.
    'RefreshRate' is display device specific.
    'RefreshRate' can use the following target types: X Screen, GPU.

  Attribute 'InitialPixmapPlacement' (optiplex:0.0): 1.
    The valid values for 'InitialPixmapPlacement' are in the range 0 - 4 (inclusive).
    'InitialPixmapPlacement' can use the following target types: X Screen.

  Attribute 'DynamicTwinview' (optiplex:0.0): 1.
    'DynamicTwinview' is an integer attribute.
    'DynamicTwinview' is a read-only attribute.
    'DynamicTwinview' can use the following target types: X Screen.

  Attribute 'MultiGpuDisplayOwner' (optiplex:0.0): 0.
    'MultiGpuDisplayOwner' is an integer attribute.
    'MultiGpuDisplayOwner' is a read-only attribute.
    'MultiGpuDisplayOwner' can use the following target types: X Screen.

  Attribute 'GPUScaling' (optiplex:0.0; display device: DFP-0): 2,1.
    Valid values for 'GPUScaling' are: [1, 2 and 3], [1 and 2].
    'GPUScaling' is display device specific.
    'GPUScaling' can use the following target types: X Screen, GPU.

  Attribute 'FrontendResolution' (optiplex:0.0; display device: DFP-0): 1280,1024.
    'FrontendResolution' is a packed integer attribute.
    'FrontendResolution' is a read-only attribute.
    'FrontendResolution' is display device specific.
    'FrontendResolution' can use the following target types: X Screen, GPU.

  Attribute 'BackendResolution' (optiplex:0.0; display device: DFP-0): 1280,1024.
    'BackendResolution' is a packed integer attribute.
    'BackendResolution' is a read-only attribute.
    'BackendResolution' is display device specific.
    'BackendResolution' can use the following target types: X Screen, GPU.

  Attribute 'FlatpanelNativeResolution' (optiplex:0.0; display device: DFP-0): 1280,1024.
    'FlatpanelNativeResolution' is a packed integer attribute.
    'FlatpanelNativeResolution' is a read-only attribute.
    'FlatpanelNativeResolution' is display device specific.
    'FlatpanelNativeResolution' can use the following target types: X Screen, GPU.

  Attribute 'FlatpanelBestFitResolution' (optiplex:0.0; display device: DFP-0): 1280,1024.
    'FlatpanelBestFitResolution' is a packed integer attribute.
    'FlatpanelBestFitResolution' is a read-only attribute.
    'FlatpanelBestFitResolution' is display device specific.
    'FlatpanelBestFitResolution' can use the following target types: X Screen, GPU.

  Attribute 'GPUScalingActive' (optiplex:0.0; display device: DFP-0): 0.
    'GPUScalingActive' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'GPUScalingActive' is a read-only attribute.
    'GPUScalingActive' is display device specific.
    'GPUScalingActive' can use the following target types: X Screen, GPU.

  Attribute 'DFPScalingActive' (optiplex:0.0; display device: DFP-0): 0.
    'DFPScalingActive' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'DFPScalingActive' is a read-only attribute.
    'DFPScalingActive' is display device specific.
    'DFPScalingActive' can use the following target types: X Screen, GPU.

  Attribute 'FSAAAppEnhanced' (optiplex:0.0): 0.
    'FSAAAppEnhanced' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'FSAAAppEnhanced' can use the following target types: X Screen.

  Attribute 'GPUErrors' (optiplex:0.0): 0.
    'GPUErrors' is an integer attribute.
    'GPUErrors' is a read-only attribute.
    'GPUErrors' can use the following target types: X Screen.

  Attribute 'GvoSupported' (optiplex:0.0): 0.
    'GvoSupported' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false).
    'GvoSupported' is a read-only attribute.
    'GvoSupported' can use the following target types: X Screen.

  Attribute 'GPUCoreTemp' (optiplex:0.0): 62.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.

  Attribute 'OpenGLImageSettings' (optiplex:0.0): 1.
    The valid values for 'OpenGLImageSettings' are in the range 0 - 3 (inclusive).
    'OpenGLImageSettings' can use the following target types: X Screen.

  Attribute 'XVideoTextureBrightness' (optiplex:0.0): 0.
    The valid values for 'XVideoTextureBrightness' are in the range -512 - 511 (inclusive).
    'XVideoTextureBrightness' can use the following target types: X Screen.

  Attribute 'XVideoTextureContrast' (optiplex:0.0): 4096.
    The valid values for 'XVideoTextureContrast' are in the range 0 - 8191 (inclusive).
    'XVideoTextureContrast' can use the following target types: X Screen.

  Attribute 'XVideoTextureSyncToVBlank' (optiplex:0.0): 1.
    The valid values for 'XVideoTextureSyncToVBlank' are in the range 0 - 1 (inclusive).
    'XVideoTextureSyncToVBlank' can use the following target types: X Screen.

  Attribute 'XVideoSyncToDisplay' (optiplex:0.0): 0x00010000.
    'XVideoSyncToDisplay' is a bitmask attribute.
    'XVideoSyncToDisplay' can use the following target types: X Screen.

  Attribute 'GPUDefault2DClockFreqs' (optiplex:0.0): 208,100.
    'GPUDefault2DClockFreqs' is a packed integer attribute.
    'GPUDefault2DClockFreqs' is a read-only attribute.
    'GPUDefault2DClockFreqs' can use the following target types: X Screen, GPU.

  Attribute 'GPUDefault3DClockFreqs' (optiplex:0.0): 459,400.
    'GPUDefault3DClockFreqs' is a packed integer attribute.
    'GPUDefault3DClockFreqs' is a read-only attribute.
    'GPUDefault3DClockFreqs' can use the following target types: X Screen, GPU.

  Attribute 'GPU2DClockFreqs' (optiplex:0.0): 208,100.
    The valid values for 'GPU2DClockFreqs' are in the ranges 52 - 416, 25 - 1100 (inclusive).
    'GPU2DClockFreqs' can use the following target types: X Screen, GPU.

  Attribute 'GPU3DClockFreqs' (optiplex:0.0): 459,400.
    The valid values for 'GPU3DClockFreqs' are in the ranges 114 - 918, 100 - 1100 (inclusive).
    'GPU3DClockFreqs' can use the following target types: X Screen, GPU.

  Attribute 'GPUCurrentClockFreqs' (optiplex:0.0): 459,400.
    'GPUCurrentClockFreqs' is a packed integer attribute.
    'GPUCurrentClockFreqs' is a read-only attribute.
    'GPUCurrentClockFreqs' can use the following target types: X Screen, GPU.

  Attribute 'GPUPerfModes' (optiplex:0.0): perf=0, nvclock=208, memclock=100 ; perf=1, nvclock=459, memclock=400

  Attribute 'NvidiaDriverVersion' (optiplex:0.0): 169.12

  Attribute 'NvControlVersion' (optiplex:0.0): 1.14

  Attribute 'GLXServerVersion' (optiplex:0.0): 1.4

  Attribute 'GLXClientVersion' (optiplex:0.0): 1.4

  Attribute 'OpenGLVersion' (optiplex:0.0): 2.1.2 NVIDIA 169.12

  Attribute 'XRandRVersion' (optiplex:0.0): 1.2

  Attribute 'XF86VidModeVersion' (optiplex:0.0): 2.2

  Attribute 'XvVersion' (optiplex:0.0): 2.2

  Attribute 'GPUCurrentPerfMode' (optiplex:0.0): 1.
    'GPUCurrentPerfMode' is an integer attribute.
    'GPUCurrentPerfMode' is a read-only attribute.
    'GPUCurrentPerfMode' can use the following target types: X Screen, GPU.

  Attribute 'GPUCurrentPerfLevel' (optiplex:0.0): 1.
    'GPUCurrentPerfLevel' is an integer attribute.
    'GPUCurrentPerfLevel' is a read-only attribute.
    'GPUCurrentPerfLevel' can use the following target types: X Screen, GPU.

  Attribute 'GPUAdaptiveClockState' (optiplex:0.0): 1.
    'GPUAdaptiveClockState' is an integer attribute.
    'GPUAdaptiveClockState' is a read-only attribute.
    'GPUAdaptiveClockState' can use the following target types: X Screen, GPU.

  Attribute 'GPUPowerSource' (optiplex:0.0): 0.
    'GPUPowerSource' is an integer attribute.
    'GPUPowerSource' is a read-only attribute.
    'GPUPowerSource' can use the following target types: X Screen, GPU.

[Luboš Doležel (Doli)]

Hmm, ani tam to nevidím. Pokud je ta grafika v notebooku, navrhuju zkusit zapojit druhý monitor až během bootování Linuxu.

Sám mám BIOS s úchvatnou funkcí, která si zabere pro sebe druhý monitor, pokud je zapojen za bootu - BIOS ten montior před grafickou kartou (až do rebootu) skryje a "díky" tomu funguje "úžasná" funkce, kdy se dá HW klávesou mezi monitory přepínat.

[CIJOML]

je to stolni nizkoprofilova karta

[DNA]

podle mě je problém v tom rozvětveném konektoru, něco podobného jsem viděl pouze na Matroxu a jelo to jen pod woknama... Nemá ta karta ne sobě dva konektory přímo?

[CIJOML]

ne :(

[DNA]

ještě jsem zagooglil a ZDE jsem se dočetl:

Dual link DVI video cards: (i.e. Quadro FX) The nVidia graphics cards with a single "dual link" DVI interface (also known as DVI-DL) are used for a single very high resolution screen or can be used to drive two analog monitors. The "dual link" DVI connector has many more pins than the traditional "single link" DVI connector. These graphics cards can use a "Y" connector from the single "dual link" DVI output to two analog VGA connectors to drive two monitors. The configuration is the same as the "TwinView" configuration detailed above except that one must specify: Option "ConnectedMonitor" "CRT,CRT"

[CIJOML]

Bezva, tak tohle zabralo, ale jen s analogovym vystupem, ja k te karte mam ale rozbocku na dva DVI a s tou to nefachci...

[CIJOML]

respektive kdyz dam FPD, FPD podle toho navodu, tak take nic...

[DNA]

DFP, DFP

věřím tomu, že z toho leze jen ten analog, nejspíš by to muselo být plný DualHead, jako mám na GF7600 (2xDVI), ale na nízkoprofilové kartě zaplať čert za to

[CIJOML]

DFP,DFP umozni mit na jednom 1280x1024 a na druhem 640x480. To nechapu, kdyz v analogu je monzo 1280x1024 na obouch...ze by chyba v driveru?